I’m about to replace the spindle housings, belt and blades on my Big Dog Alpha. Same mower, different name. This video helped a ton. Appreciate the content!

@SometimeIsNow

2 ай бұрын

Thanks for watching and I’m glad you enjoyed the video. I haven’t looked closely at the Big Dog mowers to notice they’re similar to Hustler. Good to know 👍🏼Take Care

Hey nice job on the video, it really helped a lot with my first time changing the blades. Just a heads up though, I double checked the torque value in the owners manual when changing the blades for my Hustler and it shows 73 ft-lbs for the blade spindle bolts on the top and 118 ft-lbs for the blade spindle bolts on the bottom. So you might want to torque those guys a little extra this year. Haha

@SometimeIsNow

2 ай бұрын

Thanks for stopping by the channel to watch the video. You must have a newer Hustler.. My owners manual showed the torque spec I used. Hustler must have updated the torque for the blade Ont he newer models. 🤷🏼‍♂ Thanks for the update. Take Care. 👍🏼

Thanks ,wonderful job,this teach much to all of us.God Bless you friend

Forget the mower. Let’s play with Riley!! LOL!! I have a Hustler Raptor, but not the SD. I just changed out the blades on mine, and replaced them with the Gator blades. I found a couple of rotten holes in the deck that will soon grow to be a problem. I appreciate your video!!

@SometimeIsNow

Жыл бұрын

Hey Roger, Thanks for stopping to check out the video. LOL Riley would love that.. He’ll usually get me to throw his tennis ball while I’m working on something. How’s the gator blades working out for you? Mines starting to rust were the paints flaking off. Take Care 🤙🏼

@rogerknight2267

Жыл бұрын

@@SometimeIsNow He’s a handsome dog. A friend of mine in the lawn care business suggested the Gator blades because I have two large magnolia trees that make a horrendous mess when shedding their leaves. He said they’re a superb mulching blade that should help. We’ll see. I have St. Augustine grass in my yard so I typically cut it a little high. The Gator blades seem to give a clean cut even when set so high.

Great presentation. I have the same machine and it cuts great.

@SometimeIsNow

Жыл бұрын

Hey Joe, Thanks for stopping by the channel to check out the video. Yes, The Hustler Raptor really does do a great job mowing. 👍🏼 Take Care

Great job my friend . love the video!!!

@SometimeIsNow

Жыл бұрын

Hey Tony, Thank you, and thanks for stopping by to check out the video. Take Care 👍🏼

I used a ratchet strap around it to hold up all the obstacles in the way

@SometimeIsNow

Жыл бұрын

Excellent tip !! Thanks for stopping by to check out the video. 👍🏼

Glad I bought the one with the flip up front. It I can just remember what button to push and pin to pull in the right order.

@SometimeIsNow

2 ай бұрын

Yeah.. the flip up front deck sure would be much nicer. 👍🏼 Thanks for watching! Take Care

Should have taken your john deere and lifted the front of the mower or you could hsve just taped them brackets up out of the way. Think it would of made the job easier and quicker. Only a sugestion. Thanks for the video. I own a flip up so blades and cleaning the bottom of the deck are a piece of cake.

@SometimeIsNow

4 ай бұрын

Hey Rod, Thanks for stopping by the channel to check out the video. This was my first time removing the deck. Lessons learned on this first attempt. Definitely going to use some sort of strap to hold the support hangers out of the way when re-installing the deck. Thanks for the tips.👍🏼 Take Care

Good, Thx

@SometimeIsNow

15 күн бұрын

Hey FindersKeepers, Thank you for watching 👍🏼 Take Care

Like your work 👍

@SometimeIsNow

Жыл бұрын

Hey Leonard, Thank you and thanks for stopping by to watch the video. It’s appreciated 👍🏼 Take Care

Have you ever had the reported common issue of breaking the transmission and hydro brackets? They have Thicker ones available for upgrade.

@SometimeIsNow

2 ай бұрын

Hey JD, Thanks for stopping to check out the video. I did have the low grade bolts break off on the rear axle supports and the wheel tip out and throw the belt off the hydro drives. I installed grade 8 bolts in and have not had issues yet with he brackets breaking. I have looked into them when or if this happens. Also I’m going to do the discharge chute update to match the Hustler SD X models. I’m tired of the grass getting caught on that lower support bar at the discharge area with deeper grass. Take Care

@JD-qw4bo

2 ай бұрын

@@SometimeIsNow Sounds good, thank you for the kind response. I have not had any issues with mine either but i am going to upgrade them, fairly cheap. My SD is a 2019 and does have the upgraded deck mod from the factory and it discharges great. I love your channel and videos. -All the best. -Jeremy

What a PITA job!

@SometimeIsNow

11 ай бұрын

Yes it was. I just had a couple right axle bolts break off and I almost lost the hydro gear drive on the right side. Got it squared away and back together. Take Care

You could use duck tape too hold those attachments up. Quick and easy 😌

@SometimeIsNow

Жыл бұрын

Yes, I wish I would have. 😁 Those hanger brackets were a nuisance.. Next time I’ll look at something to hold them up out of the way to make it easier to slide the deck under. 👍🏼

@easypeasy2938

9 күн бұрын

@@SometimeIsNow I always have bungies available for just that task.

@SometimeIsNow

9 күн бұрын

@@easypeasy2938 Great idea !! 👍🏼

Best dogs

@SometimeIsNow

4 ай бұрын

I’d have to agree Tony. He’s an amazing friend and goes everywhere with me. 👍🏼

Good video, but the title was wrong for this video. When I see deck repair, there should have been welding involved and not just deck cleaning. I tell my customers all the time to stop cutting wet grass then you won't have all that buildup which causes rust. I believe that you also can lift the front end once the deck is off and just pivot to one side. Straps are also a good choice.

Open the mattress and get a new one😂,just kidding

@SometimeIsNow

Жыл бұрын

😂🤣 I’m thinking it needs a Turbo !! 🤙🏼

@Iluvboostedsleds

Жыл бұрын

@@SometimeIsNow hurricane may have a tune for it🤣

@SometimeIsNow

Жыл бұрын

@@Iluvboostedsleds If they don’t, I bet he could come up with one. 😁

Несколько видео посмотрел со снятием деки и никто рычаги не подвяжет... Бегают вокруг поднимают их по нескольку раз....

@SometimeIsNow

10 ай бұрын

Спасибо, что остановились, чтобы посмотреть видео. Да, вот почему я упомянул об использовании чего-то, чтобы убрать вешалки с дороги. Делает это намного проще. Береги себя 👍🏼

You got those wheels in the wrong holes. You are mowing too low for the wheel setting, thats why the wheel brackets are bending . Check owners man.

Don’t they have wash ports

@SometimeIsNow

4 ай бұрын

Hey Tony, No wash ports on this welded deck. It’s been a great mower so far. When I purchased this I only paid $4300 and thats with the bagger attachment .

My suggestion. I can't watch a 38 minute video. My suggestion is to cut out everything other than the repair or procedure and fast forward through anything repetitive. Intros can't be longer than 3 seconds.