Thank you for doing this video, as a single lady on a tight budget, with no help.....I am going to attempt! :)

@johnnywolfe59

6 жыл бұрын

restluss This is his wife and I hope the video will help you out..He passed away in February. Thank you for watching his video.

@restluss

6 жыл бұрын

Johnny Wolfe awe, I am so very sorry! God bless you! What a blessing he has given by doing this for so many people to come m, that is in need of help! Thank you!

great video with lots of help from the grand kids sometimes the best things in life are the simple things that make a persons day

I in joyed that ,thanks for doing that

Loved it thanks an you got great patience :)

Big help! Thank you, sir. Cute little helpers too ;-)

@johnnywolfe59

7 жыл бұрын

Glad the video helped you. thank you for watching

Thank you--I have the same model and engine..Going to try this next weekend.

@johnnywolfe59

7 жыл бұрын

Lou DiBacco I hope my video helps you ...thank you for watching

great video. very helpful. thanks a ton.

@johnnywolfe59

7 жыл бұрын

your welcome Thank you for watching

I have the same mower, but I bought it from Lowe’s. I have a different air filter on mine that goes over the carb on the left side. About to do an oil change and will update if I see any differences.

I did not get a service manual with mine either!

Papaws valium are working !!!

@johnnywolfe59

7 жыл бұрын

LOL i get tough on them some times but this is how I am 99% on the time. GOt'a love the babies... Thank you for watching

What weight is the oil?

Whomever designed this mower didn't leave much clearance between the frame deck and the bottom of the oil drain valve did they? A lot of people had problems with the drain valve backing out when they tried to pull and twist the yellow sleeve on the drain. I had mine back out on my first oil change, I hand tightened the valve and figured I would tighten the valve up on the next oil change so that's where the fun began I decided to drain my oil overnight. Went to my garage at 10 PM, got me a few rags, my plan was to drain oil, and next day I would tighten the drain, flush and refill with oil When I pulled the yellow sleeve the valve came loose again so I just unscrewed the entire valve and the oil came out quicker than I expected but I had a box of rags next to me, I dammed each side of the drain hole up and channeled most of the oil into my drain pan, after the rags became saturated Next day I go into the garage and grab my deep well sockets and thread tape. I put 2 wraps of thread tape on the drain threads, started the drain valve by hand and grabbed a 15/16" socket, put the socket over the drain valve and "What the heck?" There is no clearance for a socket to slide on nor is there any room to use a wrench and I wasn't going to cut one of my wrenches in half to see if a "Stubby" would work but I needed to get the mower done to mow I grabbed a 3" or 4" piece of 3/8" pipe, a collar, 90 degree elbow and pipe plug and plumbed a new oil drain haa. It works but I can't get my little plastic guard back on with the 90 degree elbow sticking out a little past the edge of the deck I am going to get a new type of "Quick Drain" for the mower, run to NAPA or order a 15/16" crows foot wrench, install the new oil drain and be done with that headache Hindsight: I may have been able to just hand tighten the original drain but when it comes to an engine and its lifeblood I don't like gambling and I am not sure what a new Briggs & Stratton, 22 HP motor costs but I do know that I didn't want to buy a new one

@johnnywolfe59

7 жыл бұрын

Phil Yamascunt no they did not... they are suposed to supple a clear tube to drain the oil... I am finding many others did not get there's eathrr

Can you do a mowing vid soon?