Excellent vidéo .. I’ve had my Jade now for over a year and I’ve learned so much from your video .. thank you …

Thank you for the great tutorial!! I've sewn on an antique Singer forever, so this machine is an absolute delight!. I'll admit, I was a little intimidated until I watched your video. You made it look so easy and explained it thoroughly. Thank you! Happy sewing!

I was given this machine as a birthday present and only had the Manuel to get started! Thank god for your tutorial…you really helped me understand my new machine! Thank you so much! You are a fantastic teacher!

I just bought this machine today! Thank you for taking the time to show me how great this machine is. You were lovely to work with. I just searched for a tutorial and shouted 'she was so nice'! Lol!

@dalenemcdonald-mcdonaldsse8689

3 жыл бұрын

Thank you, Tammy. It was a pleasure!

I have owned my Jade 20 for just one week. Your tutorial was just great! Thanks so much.

Someone gave this machine to me a few days ago and i am so excited to try it out. We sold our farm and everything we had to travel so i had to start over with all my fabric and notions. Fabric has gotten so expensive now. Great video.

Fantastic teaching video. Thank you very much

I've done training videos for years but you, by far, are an excellent instructor! I could listen and watch you for hours. I bought this machine, used with no manual and I've got it down pat, thanks to your wonderful instruction.

@dalenemcdonald-mcdonaldsse8689

2 жыл бұрын

Oh my, thank you so much! I'm glad I could help.

Thank you for this great tutorial !!! This is my third Viking machine (Quilt Designer and Emerald 118) and thought I would only refer to the manual on an as needed basis. Boy, was I wrong. The drawings and instructions in the manual are not adequate. Your hints on how to use the Jade 20 will really help me.

@dalenemcdonald-mcdonaldsse8689

Жыл бұрын

That’s great to hear. Thank you!

Your videos sold me on this machine, my hubby bought me one and I'm in love

Excellent video! Thank you for showing and explaining everything so well - I'm looking forward to getting started with my own Jade now.

@dalenemcdonald-mcdonaldsse8689

Жыл бұрын

Thank you, and happy sewing!

Thank you so much for explaining how to thread the machine and bobbin. The tutorial was great since you demonstrate slowly and it was easy to see and follow. I love the machine so far! Just got it for Christmas. I am sure I will revisit this site again!

@dalenemcdonald-mcdonaldsse8689

3 жыл бұрын

Happy Sewing!

Thank you so much for posting this. Just bought my machine and this is so helpful. You are a great teacher.

@dalenemcdonald-mcdonaldsse8689

3 жыл бұрын

Thanks, Sara. I'm glad you found it helpful!

I just bought my Jade 20 and I'm so happy and exited, your video give me more confidence. thank you so much and God bless you.

@lizzlepoo

2 жыл бұрын

Glad I could help! Happy Sewing.

Thank you so much for this awesome video! I just purchased this machine and I was super nervous. Your video made getting started (threading it, especially) so easy!!! This was AWESOME!

@dalenemcdonald-mcdonaldsse8689

3 жыл бұрын

I'm so glad I could help. Happy sewing!

You're such a good teacher! Like the videos and I learn a lot!

@dalenemcdonald-mcdonaldsse8689

3 жыл бұрын

Thank you, Vicki!

Thank you for this video. I just brought this Jade 20 on Dec 31. I have sewn with Singers and decided I needed a wider space to sew totes. I am glad I saw this video- wanted to make sure that I threaded the needle and bobbin correctly. Also great to see the different applique stitches. I am excited to get to know this machine a little more.

@dalenemcdonald-mcdonaldsse8689

Жыл бұрын

I’m glad you found it helpful.

You are the best teacher easy to understand. I just bought this machine thanks

Thank you so much, This is an amazing video well done. I appreciate the help. I will watch anything you put out.

@dalenemcdonald-mcdonaldsse8689

4 жыл бұрын

I'm so glad you found it helpful. Happy Sewing!

What a wonderful job you have done showing this machine. I am thinking about purchasing one and right now, you have sold me in such a kind, organized, knowledgeable manner without any distractions. (Such as…music, dogs, children, uncertainty…). I so appreciate it! Thanks so much, Dalene.. Jonee

@dalenemcdonald-mcdonaldsse8689

6 ай бұрын

Thank you, Jonee! If you decide to purchase one, you can do that through our website if you wish. Happy sewing!

I got this machine the last year and I absolutely love it. It's the best purchase of my life. Perhaps the only tning that I don't like it about it it's that there isn't a button for moving the needle to the right or to the left where you want. And that I'd rather the screen information at white color. Anyway It's an amazing machine. P.S.: Sorry if my english it's not good.

@dalenemcdonald-mcdonaldsse8689

3 жыл бұрын

You CAN move the needle position. When you are using a straight stitch, you can use the buttons that are usually for stitch width to move the needle to the right or left.

That was a great demo of the machine. I have been considering buying it and now am convinced. The only weakness I see is the bobbin winding not automatically stopping when full.

@lizzlepoo

2 жыл бұрын

We'd be grateful for your business if you purchase it online from us! www.mcdonaldsvacuums.com/shop/Sewing/Sewing-and-Embroidery-Machines/Husqvarna-Viking/p/Husqvarna-Viking-Jade-20-x26539926.htm

Excellent demonstration, thanks so much.

This video was so helpful and clear, thank you so much!

@dalenemcdonald-mcdonaldsse8689

3 жыл бұрын

Thanks - I'm glad!

Actually it does stop winding the bobbin when its full. I always just let it run to max. Love my machine and learned a thing or two about it through this video. Thank you!

@dalenemcdonald-mcdonaldsse8689

3 жыл бұрын

Hi, I'm glad I could share something useful with you. Technically, when winding the bobbin, the motor runs until you stop, or until the bobbin is pushed far enough out to disengage the switch. Many times this doesn't happen, in which case it runs until the bobbin is manually moved over. It is possible to adjust the stopper, so yours must be set so that it will disengage the switch.

Thank you so, so much, God bless you! ❤

This was one of the best introductions to a sewing machine that I have ever seen. How you talk and make sure your handsout of the way everything you did made it easy for me to understand see and figure out my machine. Thank you for your hard work and sharing of this machine as it is now one of my favorite machines. Five Stars ⭐⭐⭐⭐⭐ Thanks Wookie

@dalenemcdonald-mcdonaldsse8689

Жыл бұрын

Awww...thank you!

I have had my machine for over two years. I learned to sew to make masks and upgraded machines in Dec 2020. I did NOT know I could wind the bobbin without unthreading the machine nor did I know about the presser foot pressure amount. I can't wait to finish watching this then look for more tutorials. I hope you go over how to actually do a zigzag and how to place the fabric. I am trying to find how to use it on the edges while I am bag making to help compress the edges. Thank you, thank you, thank you!

@dalenemcdonald-mcdonaldsse8689

Жыл бұрын

You’re very welcome. I’m not sure we did a zig zag stitch. I’d recommend the seam and overcast stitch. We did it for knits in the video, but you can do it on woven fabrics too.

@BarbaraLM

Жыл бұрын

@@dalenemcdonald-mcdonaldsse8689 The video helped me with the zigzag. I need to compress the edges for bag making. :)

Thank you so much. Iv had this machine for a year and Iv only used it with the straight stitch😬🤷🏻‍♀️ I learned a lot

@dalenemcdonald-mcdonaldsse8689

3 жыл бұрын

I'm so glad I could help!

Have just bought this machine, and I have to say your demonstration Is fantastic, really looking forward to doing more with my machine, then just sewing straight seams👍😄

@maximosolomon1385

2 жыл бұрын

I guess Im randomly asking but does anybody know of a method to log back into an Instagram account..? I was stupid forgot the account password. I would appreciate any help you can offer me!

@warrenrohan8551

2 жыл бұрын

@Maximo Solomon instablaster ;)

@maximosolomon1385

2 жыл бұрын

@Warren Rohan I really appreciate your reply. I found the site through google and im in the hacking process atm. Looks like it's gonna take a while so I will reply here later when my account password hopefully is recovered.

@maximosolomon1385

2 жыл бұрын

@Warren Rohan It worked and I actually got access to my account again. Im so happy:D Thanks so much, you saved my account :D

@warrenrohan8551

2 жыл бұрын

@Maximo Solomon Glad I could help :)

Thank you! This was a very helpful video.

This was an excellent review! I have never even considered a Husqvarna Viking machine before today!

@dalenemcdonald-mcdonaldsse8689

4 жыл бұрын

Well, I hope you will now. :-) I bought my first Viking 14 years ago, and I have loved every one. We do offer this model online on our website at www.mcdonaldsvacuums.com/shop/Sewing-Machines/p/Husqvarna-Viking-Jade-20-x26539926.htm if you decide you want one. ;-)

@roslynfrancis3056

4 жыл бұрын

Do you offer international shipping?

@dalenemcdonald-mcdonaldsse8689

4 жыл бұрын

@@roslynfrancis3056 Oh, no, I'm sorry. We don't.

Thank you so much! Great tutorial 😊

This was a very helpful video. I bought one of these machines from you a couple of years ago, so I was pretty familiar with how it works but still picked up several useful tidbits. 😊 I would love it if you did a video on how to use the twin needle function.

@dalenemcdonald-mcdonaldsse8689

2 жыл бұрын

I'll get that done for you soon.

thank you very much for the very clear and complete explanation

@dalenemcdonald-mcdonaldsse8689

3 жыл бұрын

I'm glad you found it helpful.

Thank you so much. This was very informative and helpful!!

@dalenemcdonald-mcdonaldsse8689

2 жыл бұрын

So glad you found it useful!

@chiapagringa

2 жыл бұрын

@@dalenemcdonald-mcdonaldsse8689 yes...very helpful as I am planning to buy this machine this week:)

Thank you for making it easy!

@dalenemcdonald-mcdonaldsse8689

3 жыл бұрын

My pleasure!

Thank you very much for this video!!

@dalenemcdonald-mcdonaldsse8689

2 жыл бұрын

You're welcome!

Thank you, you have a very nice video on this machine, just bought this machine today

@nancystrebel3339

Жыл бұрын

Excellent how you explain everything

@dalenemcdonald-mcdonaldsse8689

Жыл бұрын

I’m so glad you found it helpful. Happy sewing!

Excellent thank you!!

Loved your video

@lizzlepoo

3 жыл бұрын

Thank you!

Thankyou very helpful

Thanks!

I just brought the Jade 20. If I want additional feet, can I use any husqvarna Viking feet or only those in a certain group?

Thank you so much!

@dalenemcdonald-mcdonaldsse8689

2 жыл бұрын

You're very welcome!

Just bought this machine and was able to use it!

Thank you!

@dalenemcdonald-mcdonaldsse8689

3 жыл бұрын

My pleasure!

Thank you sooooooo much!

@dalenemcdonald-mcdonaldsse8689

2 жыл бұрын

You are very welcome!

I so appreciate this video. I’m considering a Viking jade 20 as an upgrade for my 10 year old Janome new home, which I have had many minor issues with. One of which is that I can’t sew denim without skipping stitches or completely jamming (even with a denim needle). When I try to find a machine that will work for denim, all the suggestions are for mechanical heavy duty machines... no fun! Would I get by sewing denim with a Viking jade 20? It’s not something I do daily, but I’d like to be able to.

@lizzlepoo

3 жыл бұрын

Yes, you can sew through 9 layers of denim with this machine. If you'd like to purchase one from us, our website is www.mcdonaldsvacuums.com/

Thank you! :-)

@dalenemcdonald-mcdonaldsse8689

4 жыл бұрын

My pleasure!

I just purchased my machine from Husqvarna on 9/24/22. It should be delivered by Friday. I am excited but slightly scared. I use to sew many years ago and stopped. I took a class almost a year ago - I don't know if I will remember all the details.

I see you aren’t using a walking foot to quilt! Is that foot available, or is it not needed?

Thank you that was very helpful and laid things out very well. I’m new to this machine so I don’t know if I’m off base asking this but, does this machine automatically do a lock stitch at the start and finish?

@dalenemcdonald-mcdonaldsse8689

5 ай бұрын

It does a lock stitch automatically at the beginning. You can turn that off in settings if you want. You need to press the fix button to have it perform a lock stitch at the end.

@robburnside6636

5 ай бұрын

@@dalenemcdonald-mcdonaldsse8689 thank you so much 👍

Selbst für mich als Deutschen war dieses Video sehr informativ. Bilder sagen mehr als Worte. Ich wünsche Ihnen alles Gute!

@dalenemcdonald-mcdonaldsse8689

2 жыл бұрын

Ich freue mich, dass Sie dieses Video hilfreich fanden, auch wenn es auf Englisch war. Viel Spaß beim Nähen!

LOVE YOUR VIDEOS! But can you Perhaps have the person look from your persepctive instead of having a slight view from an angle :)

This is a great video! Question: do you believe the fix stitch is strong enough to act as a back stitch? I love how it has reverse, but absolutely despise how it has to do 2 stitches and then goes into reverse and 2 stitches again to reverse the direction. I have gotten in the habit of just doing a few stitches, and then rotating my fabric around to continue sewing for my back stitches. My brother you would just hit the reverse and it would go automatically not the +2,-2 stitches before and after. Overall it’s a great machine though!!

@dalenemcdonald-mcdonaldsse8689

3 жыл бұрын

I do rely on the fix stitch. I asked about whether the 2 stitches it takes forward after you press reverse could be changed, but I guess that was hard programmed in. I've learned to adjust to it too. None of the other Vikings do this.

Thank you so much for this! I really needed this!What about using a walking foot? Do wee need one and can we use it in place of the B foot and for decorative stitching on this machine? Mine didn't come with one but my last Husqvarna did...?

@dalenemcdonald-mcdonaldsse8689

3 жыл бұрын

You can use a walking foot with this machine, but no, it doesn't come with it. This one would work with it. www.mcdonaldsvacuums.com/shop/c/p/DELUXE-WALKING-FOOT-LOW-SHANK-WITH-GUIDE-x51569050.htm

@t1dgal256

2 жыл бұрын

@@dalenemcdonald-mcdonaldsse8689 Thank you so much!!

The letters on the feet are stamped, not raised or embossed.

شكرا لك شرحك واضح ارجو ان تترجم الى اللغه العربيه لاني لم افهم كثيرا وانا احب ان افهم على كل الازرار لاني امتلك هذا جهاز

Amazingly informative videos!! I’m definitely going to buy my next machine from y’all. It will be either the jade or the emerald (while they’re on sale!) I’m leaning toward the jade after watching both videos but curious as to what you think the main differences/pros-cons are.

@dalenemcdonald-mcdonaldsse8689

2 жыл бұрын

Well, there are quite a few differences. First, the Emerald is a mechanical machine, and the Jade 20 is electronic. A mechanical machine is likely to last longer simply because there aren't any chips or boards that may need to be replaced. Think about a typewriter versus a computer. The Jade 20 has some features I wouldn't want to be without now that I've used them. It has a setting for the machine to stop with the needle down. I love that feature because my project won't shift on me if I need to stop and adjust something. It also has a start-stop button, which I use a lot. I use it for buttonholes and special stitches, and I use it when I'm free-motion quilting. Another thing I love about the Jade 20 is that all of its parts and pieces, including the power cord and foot control, fit in its case and it becomes its own hard case. If you need to take it to class or put your sewing away, it is self contained and makes it easy to travel or stow in a closet. There are more differences, like lots more stitches on the Jade, but those are the main ones I can think of without having the machine in front of me.

@ariadelanoche1506

2 жыл бұрын

@@dalenemcdonald-mcdonaldsse8689 thank you for this prompt and thorough response!! I think I’ll go for Jade; I have a very reliable mechanical Bernina but would love the convenient features you mentioned of the Jade.

Thank you so much for this video. I'm a visual learner so this vidoe was very helpful. I've always sewn by hand, last year for Christmas I was gifted this machine. I'm still learninng and had two failed attempts. Turns out it was due to the quality of my thread. if you don't mind me asking, where did you get your thread?

@dalenemcdonald-mcdonaldsse8689

2 жыл бұрын

We carry Robison-Anton polyester and Exquisite thread from dime. tinyurl.com/58h9wrk

Can you use B foot for regular non bulky fabric instead of the A foot

@dalenemcdonald-mcdonaldsse8689

Жыл бұрын

Yes. The A foot has more surface area that connects to the fabric, though, so it is designed for regular fabrics and non-decorative stitches.

I'm used to using a walking foot on my other machine for quilting with high loft batting. Can I use one on my Jade?

@dalenemcdonald-mcdonaldsse8689

Жыл бұрын

Yes, you can. This Singer walking foot will work with your Jade. www.mcdonaldsvacuums.com/shop/c/p/Singer-Universal-Even-Feed-Walking-Foot---Short-Shank-x67997522.htm

Your video is super useful, I love it. Thank you very much for sharing your knowledge. Thanks to your video I decided to buy a new HV Jade 20. I'm sewing like a big girl now :D Also looking for a serger, a hobby model but not toyish. Any suggestions?? Thanks again and stay safe :)

@dalenemcdonald-mcdonaldsse8689

3 жыл бұрын

The HV H|Class 250S is a good basic serger. It is easy to thread. www.mcdonaldsvacuums.com/shop/Sewing-Machines/Husqvarna-Viking/p/Husqvarna-Viking-HClass-250S-x37999395.htm An even better one is the HV Amber Air S|400 serger. The lower loopers are air threaders, and both of the top needles have needle threaders. www.mcdonaldsvacuums.com/shop/Sewing-Machines/Husqvarna-Viking/p/Husqvarna-Viking-Amber-Air-S400-x43632866.htm There is more info on both of them at the www.husqvarnaviking.com/en-US/Machines/Overlock.

Could tell me what brand of thread you were using in this video? Thanks

@dalenemcdonald-mcdonaldsse8689

3 жыл бұрын

Hi Beverly, I'm using Robison-Anton polyester thread.

Hi Darlene, this video has been a huge help to me , thank you. Do you have any other tutorials on the Viking Jade? Many thanks x

@dalenemcdonald-mcdonaldsse8689

3 жыл бұрын

Hi, June, I don't have any more right now. Is there something you'd like me to show you?

@andyk1k1

3 жыл бұрын

@@dalenemcdonald-mcdonaldsse8689 Hi Dalene, thank you for such a quick response. The machine and brand are new to me, so lots to learn. I am usually a Brother girl but love my Jade. Thank you for your offer to show me something but there is so much I need/want to know - you would have to move in with me for a month! xx

@dalenemcdonald-mcdonaldsse8689

3 жыл бұрын

@@andyk1k1 I'll try to keep adding small videos about things you can do with it. Stay tuned!

@andyk1k1

3 жыл бұрын

@@dalenemcdonald-mcdonaldsse8689 Would love that, thank you. Have a wonderful day.

Can I use the start/stop button without unplugging the foot pedal?

@dalenemcdonald-mcdonaldsse8689

3 жыл бұрын

Yes, you can.

Do you have to back stitch at the start and end?

@dalenemcdonald-mcdonaldsse8689

4 жыл бұрын

The machine is set with a "Fix" default at the beginning. It makes a few small stitches back and forth, so you don't need to back stitch at the start. You can press the "Fix" when you are finished instead of using a backstitch if you wish. The default at the beginning can be turned off in the settings. I believe that lasts until you turn off the machine.

Hi . enjoyed your review. Im wondering if this machine jas a free arm ?

@dalenemcdonald-mcdonaldsse8689

3 жыл бұрын

Yes, it does. You can pull the storage bins off on the left side of the machine.

@sherrybuskirk6312

3 жыл бұрын

Thank you very much

Hello I would like to know if this Husqvarna is better than the brother A80 thanks

@dalenemcdonald-mcdonaldsse8689

2 жыл бұрын

The Jade 20 is absolutely, in my opinion, a better machine than that Brother. We work on all makes and models. All of our technicians prefer any Husqvarna Viking to any brother machine. They're better engineered and better made.

I love this machine but he says sometimes E 2 and up. What does that mean and what can I do to fix it?

@dalenemcdonald-mcdonaldsse8689

Ай бұрын

It means the motor is working too hard and needs to rest a minute. Are you working with thick fabric or many layers?

Thank you! Question.: I have been trying the shirring technique but no matter what I do, the elastic thread doesn't gather. Could you please give some advice, or is it not possible with a Jade 20?

@dalenemcdonald-mcdonaldsse8689

2 жыл бұрын

I actually haven't tried it on the Jade 20. Let me find some elastic thread and give it a try. I'll let you know.

@nitikadhall4529

2 жыл бұрын

@@dalenemcdonald-mcdonaldsse8689 Thank you!

@dalenemcdonald-mcdonaldsse8689

2 жыл бұрын

I have done it with the Jade 20. Here's a link to video I did. Perhaps you should increase the thread tension. Make sure you have the elastic thread clicked in to the bobbin tension. I hope this helps. kzread.info/dash/bejne/ooZrl5ZmmNC7cZM.html

I just got my Jade 20 today. It's been on order since last August! It finally came in and this video is very helpful! Thanks very much. I noticed you did not change ur needle when going from woven to stretchy knit. Should you do this or is it ok not too? :) And if not what needle did u use? Thanks again!

@dalenemcdonald-mcdonaldsse8689

3 жыл бұрын

I didn't change my needle in the video for each technique because time. However, for best results, you should change your needle for the type of fabric and/or technique. For a very lightweight knit, I recommend a 75 stretch needle. For heavier weight stretch fabrics, a higher number like 80 or 90. For denim, at least a size 90 denim needle. Hope that helps. Your machine give you tips on what needle to use. Check the screen.

@Fg4e

3 жыл бұрын

@@dalenemcdonald-mcdonaldsse8689 Thank you very much! :)

do you need to change the foot pressure if you are sewing 2 layer of cotton fabric?

@dalenemcdonald-mcdonaldsse8689

Жыл бұрын

No, you shouldn’t need to do that.

@danielabeatty6882

Жыл бұрын

@@dalenemcdonald-mcdonaldsse8689 thanks!

does it have speed control button?

@dalenemcdonald-mcdonaldsse8689

2 жыл бұрын

Jean, I'm sorry that I missed your question. It does have a speed control button.

Dalene could I ask about the Jade 20 when I open my Jade 20 Sewing Machine Sewing Advisor it makes a snapping noise and vibrates. Is this normal.Feels like over time this will break.

@dalenemcdonald-mcdonaldsse8689

4 жыл бұрын

Walter, Is it the lid that makes the snapping noise? Or is it the needle that vibrates and pulses?

@walterlewis1029

4 жыл бұрын

@@dalenemcdonald-mcdonaldsse8689 This is the lid(Where the Sewing Advisor is )when I open or close the lid.I get a snapping sound.Like there is resistant.Could you check your Jade 20 to see if yours does the same thing.

@walterlewis1029

4 жыл бұрын

I know on some things that have a lid like this there might be a catch to keep the lid from falling down. But this seems like a design flaw. I know the Jade 20 has been out for years.

@dalenemcdonald-mcdonaldsse8689

4 жыл бұрын

@@walterlewis1029 The lid shouldn't snap like that. You might check where the lid connects to see if it's attached correctly. Did you purchase yours from a dealer? If so, I suggest you take it there and see if the can fix it for you.

@walterlewis1029

4 жыл бұрын

Yes it was purchased from a dealer.Dalene when you open the lid of yours.Is it a nice and smooth action.

I got this machine during the pandemic and could not attend an inperson class. I have sewn on it lots, but today, can't get the completed bobbin out of the machine. What did I do wrong???? Thanks

@dalenemcdonald-mcdonaldsse8689

3 жыл бұрын

Are you talking about after winding the bobbin? If so, you've wound it too tight, and you'll need to strip all of the thread off of the bobbin, and that bobbin is probably broken. The machine doesn't always stop winding the bobbin automatically - the motor keeps running. You can adjust the stopper so that it stops winding, but the motor will keep running. I just watch it and stop the bobbin before it gets too full. If it's something else, let me know and I'll try to help.

@annmcadams6975

3 жыл бұрын

Thank you so much for the video. I watched it and you talked about the bobbin, and I took all the thread off the bobbin and it came off like usual!!!! love the how to video on this machine!!!

Thanks for your video. I am new to sewing and have had this machine since last May. I cannot seem to sew over 2 layers of cotton (especially near an edge) or the fabric jams up. It helps if I use the walking foot. I've watched others sewing simple cotton projects (2 layers) on KZread without having to use a walking foot. I cannot use the regular feet if sewing a simple cotton coaster with thin ironed-on fusible fabric.... In addition, it seems like the feed dogs pull to the left significantly when I'm sewing. Wondering if anyone else has these issues? Maybe I have a lemon ;(

@dalenemcdonald-mcdonaldsse8689

3 жыл бұрын

The fabric jams, or is it the thread? Are you sure you are threading the machine correctly? The foot must be UP when you are threading the top of the machine. Make sure you pull the top thread through the foot and to the back before you start. This will help keep the thread from knotting up. The fix function will stitch 4-5 stitches in place at the beginning and then will start moving forward, so let it do it's thing. Also, don't push the fabric under the foot. The machine should pull the fabric through for you. If all of those things are working correctly, I suggest you take it back in to your dealer and have them take a look at it.

@paperdogstudios6342

3 жыл бұрын

@@dalenemcdonald-mcdonaldsse8689 It is the fabric that jams. The walking foot helps a lot. Maybe I just have to use the walking foot for most of my projects....

@dalenemcdonald-mcdonaldsse8689

3 жыл бұрын

@@paperdogstudios6342 If that really is the case, then you should take it in for service.

@paperdogstudios6342

3 жыл бұрын

@@dalenemcdonald-mcdonaldsse8689 Thank you.

What settings for free motion quilting

@dalenemcdonald-mcdonaldsse8689

3 жыл бұрын

The settings are the same as for the Jade 35. You will need a free motion spring foot too. Here's a video for the Jade 35 that is basically the same for the Jade 20. kzread.info/dash/bejne/q52oz5uMYsLTfJc.html

Hi, I have this machine, and it suddenly won’t do anything except turn the light on. No sound when you press on the control foot at all. Any help is appreciated. Thanks!

@lizzlepoo

Ай бұрын

Do any of the buttons work? If so, try unplugging the foot control and plugging it back in. If that does not work, I'm afraid you'll need to take it to your local dealer.

@debbiebarnette9715

Ай бұрын

@@lizzlepoo Thank you for your response. I switched out the foot pedal with one of my Singer machines, and it seems to be working now. Thanks again.

Hi do you know how to use the Viking 6270?

@dalenemcdonald-mcdonaldsse8689

3 жыл бұрын

I'm sorry, but no, we don't have that model in the store.

Hi Dalene! I'm trying to decide what sewing machine to buy and currently I'm stuck between Husqvarna Viking Jade 20 and JUKI HZL LB5020 I saw good comments for both but I just cant decide. It would be my first sewing machine. Thank you in advance!

@dalenemcdonald-mcdonaldsse8689

2 жыл бұрын

Hi! I have not used the Juki machine, but the Jade 20 would be a great choice for your first machine. HV machines are designed for ease of use, and the Jade 20 provides lots of guidance on how to set up the machine to sew beautifully on any type of fabric. You can even buy one from us if you wish: www.mcdonaldsvacuums.com/shop/c/p/Husqvarna-Viking-Jade-20-x26539926.htm. Whatever you decide, I wish you happy sewing! Dalene

@dalenemcdonald-mcdonaldsse8689

2 жыл бұрын

I should add that you really should purchase your machine from a local dealer if you can. They will be able to provide support to you in the future if you have any problems, and should offer you a free, in person owner's class.

@milicadrobnjakovic6617

2 жыл бұрын

@@dalenemcdonald-mcdonaldsse8689 I live in Serbia so I would have to buy it locally here, and here it only has one dealer that is licensed to work on Hosqvarna machines! Thank you so much for your help.

@lizzlepoo

2 жыл бұрын

@@milicadrobnjakovic6617 You are very welcome!

@marti2533

8 ай бұрын

​@@milicadrobnjakovic6617Cao, htela sam da proverim da li si mozda kupila na kraju ovu masinu? Je l bi mogla da podelis utiske nakon godinu dana koriscenja? Razmisljam se da kupim istu (pretpostavljam od istog prodavca).

Hola ! Puedes dictarme un curso presencial?

@lizzlepoo

3 ай бұрын

¿Puedes venir a una de nuestras tiendas? Tenemos uno en Wichita, KS y otro en Arkansas City KS. No hablo español, pero ¿pueden traer un traductor?

Is there really a Plastic foot or Foot holder on that Machine...?? ..Looks strange too me....

@dalenemcdonald-mcdonaldsse8689

4 жыл бұрын

Most of the feet are metal. The ankle is plastic, which makes it easy to change feet.

Can this machine sew on denim?

@dalenemcdonald-mcdonaldsse8689

3 жыл бұрын

Oh, yes! It can sew through 9 layers of denim!

@zzshinelle

3 жыл бұрын

@@dalenemcdonald-mcdonaldsse8689 thank you so much!

Wich thread do you recommend?

@lizzlepoo

2 ай бұрын

I use a 40 weight polyester thread for most things. I use Exquisite or Robison-Anton, but Glide, Isacord, or Aurafil are all good quality threads.

@janetburer1316

2 ай бұрын

@lizzlepoo I am from Holland so now I bought gutermann! Seems good quality!

@lizzlepoo

2 ай бұрын

@@janetburer1316 gutermann is good!

@janetburer1316

2 ай бұрын

Thank you, Darlene. And also for your explanation of the husqvarna jade 20! Helps a lot!

I'm new to sewing and I just love my machine. However, I have tried rewind a bobbin and neither way is working. I have gone step by step on winding instructions and the bobbin just spins with winding the thread. What am I doing wrong? Please help.

@dalenemcdonald-mcdonaldsse8689

3 жыл бұрын

Do you have the bobbin pushed all the way down onto the pin? There should be some metal showing at the top of the bobbin. You need to hold onto the thread until enough thread winds onto the bobbin so that it doesn't come out. If that doesn't help, please try to describe the problem in a little more detail, or maybe try calling one of the stores. I'm at this number Mondays and Fridays 620-441-0939 and this one Tuesdays and Saturdays 316-358-9146.

@Mary-mc1jn

3 жыл бұрын

I have this problem too. Will try again with the info provided. Thanks.

I have had this machine for 4 years. I have nothing but disappointment. The stitches are never even they go short to long, the material pulls to the left. I have taken it in for service but never fixes. Also the bobbin only wants to fill the top.

when you demonstrate how to do something, your hand is in the way

@dalenemcdonald-mcdonaldsse8689

3 жыл бұрын

I know, and I'm sorry about that. We're working on trying to avoid that.

It's a bit frustrating that she always has her left hand obscuring what she's doing on the machine.

@dalenemcdonald-mcdonaldsse8689

3 жыл бұрын

Hi, Donna, I'm sorry about that. I'll talk to our videographer about it.

I just HATE this sewing machine!!!! The design of the accessory drawers is sticky and extremely annoying. They are very hard to open. Threading is a nightmare because there's not enough room to get your hands in there to thread that needle. Winding the bobbin us another nightmare. There is no automatic stop, it ALWAYS winds the thread in s tangled mess. Changing the needle is again difficult due to that small opening. Aghhhh!