Ok , me and my guy that ports a lot of saws watched this video and me personally if I was paying you to port my saw and you just took a Dremel or wut ever you use to put those little v shaped grooves in the lower transfer ports id be a pissed man,
@richardflagg3084
Ай бұрын
Amazing how well it ran with "only" putting a few grooves in the neck of the cylinder. You two seriously think I tore the whole saw down to "only" do that?
@bjorker402 ай бұрын
I still have my 335xpt T handle from early 2000's and my 540xp from about 2015 and I love them both. I never changed a thing on either one and never felt the need to do so...if you're semi-serious about cutting and processing wood, neither of these saws should be alone in the shed. Many guys buy these saws with the wrong idea of having them cover all the size spectrums of felling and cutting.
@randygully81396 ай бұрын
Wow....!!! have been looking for the 1st. person to assist us all here on u-tube with a take down rebuild modify .. Just got mine for the cabin about a month ago , and like most of the owners we want this beast to unleash its full power opportunity .. Thank you , Thank you for the assistance .
@Sethhaun786 ай бұрын
Finally husqvarna has a good t-handle
@larrywarner9314Ай бұрын
As far as the holes in that bar being over sized , it helps with oiling , two that bar fits other models the required those holes that size , that metal clip that came out it's an issue that Husqvarna is dealing with I bought that model saw and it locked up and destroyed the cylinder and everything inside the saw so keep that in mind
@batmantiss6 ай бұрын
I like those plus size tensioner holes for when I'm in a hurry with zero patience
@richardflagg3084
6 ай бұрын
🤣🤣
@randyschmittou8708
5 ай бұрын
Like a hotdog in a holiday! LOL
@aaronpowell48856 ай бұрын
That one runs sweet👍🏻 good to see husky stepping it up with their top handles!
@bethanyhaskiell91166 ай бұрын
Husqvarna is really on to something with the MK3 that saw is a beast I think we finally have a new top dog in the trim saw world it puts my 200t to shame
@Northofsomething826 ай бұрын
That thing rips! Well done!
@902hand76 ай бұрын
Looks like you got you a tiger by the tail there Richard - nice work 👍👍
@joecasatelli48256 ай бұрын
Just commenting to help the algorithm... love your channel Sir
@tedneitzel6 ай бұрын
Sweet runner!
@kbittorf3356 ай бұрын
Good job!👍
@jonathanhensley86856 ай бұрын
Nice runner Mr. Flagg sounds good too! You can put a little dab of Hylomar universal blue on the intake boot clip to secure it in place it’s good insurance I know of a couple that have come loose at max rpm and wrecked the saw makes a bad day for a builder! And If you ever do any machine work to the 540 iii cut the cylinder skirt about .010 more then the total you removed from the cylinder including the gasket and match the chamfer back, The cases have tapered dimples that won’t let the cylinder go down if this is not done. 👍🏼
@randyschmittou87085 ай бұрын
That's a HORNY TOAD! Nice job!
@KAMP85056 ай бұрын
Love mine!
@aarons32036 ай бұрын
My only pet peeve with the T540 Mark III or could be the .043 chain too, is when I threw a chain with it, it completely shredded the plastic where the clutch sits. Saw still functions fine, probably more cosmetic but you would think Husqvarna could come up with something a little better!
@richardflagg3084
6 ай бұрын
On the bright side that piece of plastic is not expensive. I'd order one or two and replace it soon. Without the "dust shield" in place ur gonna get a bunch of crud caked to the engine. Same thing happens on the 201 if it makes ya feel any better
@Mike_Mike_06 ай бұрын
Nice work Rich ❤❤❤ My MK2 tensioner has the same problem and I thought it was defevtive. 🤧🤧🤧😪😪🤧 Happy and safe cutting 😊😊😊😊👍👍👍💪💪💪
@southernadirondackoutdoors6 ай бұрын
I'm a Stihl guy who recently got my first ever husqvarna, the 540 XP Mark III (rear handle) and I love it except for that stupid chain tensioner mechanism built into the cover rather than the body.
@richardflagg3084
6 ай бұрын
It is pretty cheezy for a pro model saw.......
@mfsaws82406 ай бұрын
You deserve a beer after that one! Haha. Saw runs great.
@richardflagg3084
6 ай бұрын
I was thinking the same thing after the third pull of Christmas. Poured myself a treat while the video was loading.
@mfsaws8240
6 ай бұрын
@@richardflagg3084 Haha yessir. Like when I ported a 500i got it all done and back together and had a piston circlip laying on the bench. 😂😅 Damn
@Sethhaun786 ай бұрын
Makes sense Oregon..Jacob sells 325 mini nano from his sappy supplies store .he's in Oregon 😊
@user-bz8uc2cp2x6 ай бұрын
Just found this channel. Awesome stuff. Do you do porting maps? I’ll have to explore and see if I can get some insight into your process
@westcoastsaw13686 ай бұрын
That’s an animal .
@kyleboman66 ай бұрын
The one I had was a piece of shit. It would not start hot and would always loosen the chain and chain cover nuts. I had the whole cover come off and the chain came off and cut my saw pants. Didn’t matter how tight I did the bolts or chain. I sent it back and got a 201
@fraser9056 ай бұрын
🤌 can't wait to run this. I laughed out loud when I saw that saw apart for a second time.
@justinmjolnir91244 ай бұрын
They only run for half a day I use to switch out saws at lunch and then in the morning it would run good again the filters would get clogged up there so fine I don't know but they don't like the heat
@diagorasmoustakas2493 ай бұрын
awesome video 😎what is this white thing that comes off ?
@christopherwayne6466 ай бұрын
Awesome dude! Can I send you my T540's?
@Super-Dave-Outdoors6 ай бұрын
Speedcut nano? You can get 2511s with speedcut nano right out the box too
@jstocker11036 ай бұрын
What gasket maker are you using for your base gasket delete?
@w6qd6 ай бұрын
Made in Japan? Is it a rebadged RedMax? Husky owns RedMax/Zenoah.
@joehicks81893 ай бұрын
Do you know if this take the same muffler as the mk1/mk2?
@thim80096 ай бұрын
I have tons of chain and bars for stihl 201. Do you think a modded 201 is as good as the husky modded?
@TICKLE_MY_BEANZ4 ай бұрын
How do i semd you my mark 3 for porting and would you reccomend me trying to mod my mufflermyself
@Sethhaun786 ай бұрын
Payed 1000.00 with 16 inch bar extra on my 201t its was 900 something then tax so was 1100
@fbroussard875 ай бұрын
Why not remove the stainless piece that fell off of the intake?
@AlexKall
Ай бұрын
Probably there for a good reason.
@Sethhaun786 ай бұрын
Insaine for that 201t by theway . Insaine prices
@Sethhaun786 ай бұрын
Stange piston
@chasp_07846 ай бұрын
Large holes for making goofy awkward outboard clutch/adjuster setup easier to install. People love it, I am not one of those people.
@frankcooper56296 ай бұрын
Don’t ya just love doin the job twice and getin paid once.
Пікірлер: 49
Ok , me and my guy that ports a lot of saws watched this video and me personally if I was paying you to port my saw and you just took a Dremel or wut ever you use to put those little v shaped grooves in the lower transfer ports id be a pissed man,
@richardflagg3084
Ай бұрын
Amazing how well it ran with "only" putting a few grooves in the neck of the cylinder. You two seriously think I tore the whole saw down to "only" do that?
I still have my 335xpt T handle from early 2000's and my 540xp from about 2015 and I love them both. I never changed a thing on either one and never felt the need to do so...if you're semi-serious about cutting and processing wood, neither of these saws should be alone in the shed. Many guys buy these saws with the wrong idea of having them cover all the size spectrums of felling and cutting.
Wow....!!! have been looking for the 1st. person to assist us all here on u-tube with a take down rebuild modify .. Just got mine for the cabin about a month ago , and like most of the owners we want this beast to unleash its full power opportunity .. Thank you , Thank you for the assistance .
Finally husqvarna has a good t-handle
As far as the holes in that bar being over sized , it helps with oiling , two that bar fits other models the required those holes that size , that metal clip that came out it's an issue that Husqvarna is dealing with I bought that model saw and it locked up and destroyed the cylinder and everything inside the saw so keep that in mind
I like those plus size tensioner holes for when I'm in a hurry with zero patience
@richardflagg3084
6 ай бұрын
🤣🤣
@randyschmittou8708
5 ай бұрын
Like a hotdog in a holiday! LOL
That one runs sweet👍🏻 good to see husky stepping it up with their top handles!
Husqvarna is really on to something with the MK3 that saw is a beast I think we finally have a new top dog in the trim saw world it puts my 200t to shame
That thing rips! Well done!
Looks like you got you a tiger by the tail there Richard - nice work 👍👍
Just commenting to help the algorithm... love your channel Sir
Sweet runner!
Good job!👍
Nice runner Mr. Flagg sounds good too! You can put a little dab of Hylomar universal blue on the intake boot clip to secure it in place it’s good insurance I know of a couple that have come loose at max rpm and wrecked the saw makes a bad day for a builder! And If you ever do any machine work to the 540 iii cut the cylinder skirt about .010 more then the total you removed from the cylinder including the gasket and match the chamfer back, The cases have tapered dimples that won’t let the cylinder go down if this is not done. 👍🏼
That's a HORNY TOAD! Nice job!
Love mine!
My only pet peeve with the T540 Mark III or could be the .043 chain too, is when I threw a chain with it, it completely shredded the plastic where the clutch sits. Saw still functions fine, probably more cosmetic but you would think Husqvarna could come up with something a little better!
@richardflagg3084
6 ай бұрын
On the bright side that piece of plastic is not expensive. I'd order one or two and replace it soon. Without the "dust shield" in place ur gonna get a bunch of crud caked to the engine. Same thing happens on the 201 if it makes ya feel any better
Nice work Rich ❤❤❤ My MK2 tensioner has the same problem and I thought it was defevtive. 🤧🤧🤧😪😪🤧 Happy and safe cutting 😊😊😊😊👍👍👍💪💪💪
I'm a Stihl guy who recently got my first ever husqvarna, the 540 XP Mark III (rear handle) and I love it except for that stupid chain tensioner mechanism built into the cover rather than the body.
@richardflagg3084
6 ай бұрын
It is pretty cheezy for a pro model saw.......
You deserve a beer after that one! Haha. Saw runs great.
@richardflagg3084
6 ай бұрын
I was thinking the same thing after the third pull of Christmas. Poured myself a treat while the video was loading.
@mfsaws8240
6 ай бұрын
@@richardflagg3084 Haha yessir. Like when I ported a 500i got it all done and back together and had a piston circlip laying on the bench. 😂😅 Damn
Makes sense Oregon..Jacob sells 325 mini nano from his sappy supplies store .he's in Oregon 😊
Just found this channel. Awesome stuff. Do you do porting maps? I’ll have to explore and see if I can get some insight into your process
That’s an animal .
The one I had was a piece of shit. It would not start hot and would always loosen the chain and chain cover nuts. I had the whole cover come off and the chain came off and cut my saw pants. Didn’t matter how tight I did the bolts or chain. I sent it back and got a 201
🤌 can't wait to run this. I laughed out loud when I saw that saw apart for a second time.
They only run for half a day I use to switch out saws at lunch and then in the morning it would run good again the filters would get clogged up there so fine I don't know but they don't like the heat
awesome video 😎what is this white thing that comes off ?
Awesome dude! Can I send you my T540's?
Speedcut nano? You can get 2511s with speedcut nano right out the box too
What gasket maker are you using for your base gasket delete?
Made in Japan? Is it a rebadged RedMax? Husky owns RedMax/Zenoah.
Do you know if this take the same muffler as the mk1/mk2?
I have tons of chain and bars for stihl 201. Do you think a modded 201 is as good as the husky modded?
How do i semd you my mark 3 for porting and would you reccomend me trying to mod my mufflermyself
Payed 1000.00 with 16 inch bar extra on my 201t its was 900 something then tax so was 1100
Why not remove the stainless piece that fell off of the intake?
@AlexKall
Ай бұрын
Probably there for a good reason.
Insaine for that 201t by theway . Insaine prices
Stange piston
Large holes for making goofy awkward outboard clutch/adjuster setup easier to install. People love it, I am not one of those people.
Don’t ya just love doin the job twice and getin paid once.