This is one of the best innovations for cutting hard material they've come up with for anything over 5in. If you get good enough with one you don't even have to precut with anything else. Even if you can't cut a straight line with one try tapconing a 2 by 4 on your cut line and always let the ring saw do the bulk of the work. Don't push it.

Very cool tool, we have a couple of that ones!

The best!

@vikavika3468

3 жыл бұрын

@Meet online with a heart on your avatar nquatro_ru да все фирмы делают резаки, Шиндайва, Хитачи, Макита, Штиль и т. д

I cut concrete for a living the ring saw is great to save on the chain sawing but you don't chain saw the corners first. that's why your cuts not strait. Ring saw then chainsaw the corners, gives you a cleaner cut great products but bad demo. try to cut the corners last and you can use the wall walker to keep your strait line. your welcome

@mikewiththebluecar

7 жыл бұрын

William Riley the reason they cut the corners with the chain saw first is because the ring saw blade is thinner than the chain saw blade. If you try to put the chain saw in the narrow cut of the ring saw it will jump out of the cut and you could break the chain.

@antoniosmall4413

4 жыл бұрын

What's a wall walker? and horizontal cuts are the hardest.

@ryanmccarthy7770

2 жыл бұрын

@@mikewiththebluecar we pre-cut with a wider shop saw blade for that reason and it works great

@ryanmccarthy7770

2 жыл бұрын

chop, not shop

@AIn366

2 жыл бұрын

@@mikewiththebluecar I looking to buy a machine to cut doors and windows in walls and I can't afford now two machines what would you say I should buy Thanks

What's the music? Maybe someone knows its name?

Precio

Mujhe ye maseen leni cost batao

it seems that handsaw is not bad too... why to pay more?

Good but when the rollers start wearing the blade keeps jumping out and it costs a small fortune to replace them..hire company's stopped hiring them out because of that problem..

可以切断墙体内的钢筋吗？

try to do that in polish blocks from 1970's .. and book something about 5-8 hours for one window.. ;]

Cut backwards though , or lose your fronts x

@sameermanakkathodi7424

3 жыл бұрын

How much indan Mony

There's no sparks so no Steele so it's not reinforced concrete 😢

@canadian7494

8 күн бұрын

1 min. In theirs sparks

That is the most untidy cut i have ever seen, handsaw it first then ring saw, faster cleaner and tider

@antoniosmall4413

4 жыл бұрын

i'm looking to get into the business. Just used the cut n break - hated it. So if I am doing a 8" masonry wall I will take the K1270 (why not k760?) and pre-cut the lines to the 5" depth and then come back behind it with the ring saw for the other 3"? Do you still need a chainsaw for the corners?

@dericksuapaia

3 жыл бұрын

@@antoniosmall4413 I would’ve used ringsaw first than handsaw after. Bottom cut first than top cut and either left or right side afterwards.

Worst demo ever for starters U precut with a K1270 then U use wider precut blade the same thickness as your ring saw blade to save wear and then yes finish with the chain saw, if you don't precut before ring sawing bad kick back can occur which has killed operators they should put that in the brochure.

@antoniosmall4413

4 жыл бұрын

i'm looking to get into the business. Just used the cut n break - hated it. So if I am doing a 8" masonry wall I will take the K1270 (why not k760?) and pre-cut the lines to the 5" depth and then come back behind it with the ring saw for the other 3"? Do you still need a chainsaw for the corners?

Definitely not the tool to start a cut with, they won’t hold up very long this way! I do this for a living and can tell you this for a fact! Otherwise great tool.