Who would down vote this the guy provided a lot of information

Great video! Great example with the different tools. Gave me exactly what I needed. I’ve been searching all day for a good video on compressors. Thanks!

@javosgarage

3 жыл бұрын

@Brandon Somerville - Well thank you for the compliment Brandon! Super glad to hear my video was helpful to you. Thanks for stopping by!

This is one of the best reviews I have ever seen. It was though and complete.

Hey Javo, never seen your channel but this video has been tremendously helpful for me man.

@javosgarage

3 жыл бұрын

@Sam Nuss - Well welcome to my channel! Super glad to hear you found my video to be helpful to you, that always makes my day. I appreciate you stopping by and taking a moment to leave me some feedback - thank you!

Great video, it helped me a lot. I like how you included the impact gun. Really enjoying your KZread channel 👍🏻

@javosgarage

3 жыл бұрын

@Kingtana Filmz - Thank you very much for the compliment! It always puts a huge smile on my face to hear one of my videos has been helpful for someone. Super glad to hear you're enjoying the videos as well. I really appreciate you stopping by and taking a moment to leave me a comment - thank you.

Great job on the compressor tour and and the comparisons.

@javosgarage

3 жыл бұрын

@Mark Solomon - Thank you very much Mark! I appreciate you stopping by and taking a moment to leave me a comment - thank you.

Great review I really appreciate the honest review!

This is a real review...test evidence and all!! Great...you raise the bar!!

@javosgarage

5 ай бұрын

Thank you very much for the compliment!

Great Video. Very detailed, objective, and informative. Really a big help in selecting a comopressor. Thanks!!!

@javosgarage

Жыл бұрын

Thank you for the compliment Saeed. It always makes my day to hear one of my videos has been able to help someone. Thanks for stopping by and taking a moment to leave me a comment.

Saw one on marketplace had to find a review on it being used for air impact wrenches and you sold me on it! Even if I have to wait for it the $75 for the compressor is beyond worth it especially when my grandpa has a set of literally new in box air tools including an impact wrench so they’ll finally get used 😁 Thank you!

@javosgarage

5 ай бұрын

Glad I could help!

Yes, this video was helpful and informative. Well done, Thank you.

@javosgarage

3 жыл бұрын

@PT Johnson - Super glad to hear you enjoyed the video and thank you for the compliment. I appreciate you stopping by and taking a moment to leave me some feedback - thank you!

Great review, thanks man.

@javosgarage

3 жыл бұрын

@Bill Pullen - You're very welcome and thank you for the compliment!

Very thorough review, 👌

@javosgarage

3 жыл бұрын

@Hello World - Thank you very much for the compliment!

good stuff thanks man, gonna pick one up tomorrow

@javosgarage

3 жыл бұрын

@MrTPoops - Well thank you for the compliment Mr. Hill! Never had a celebrity leave a comment on my channel before. Tell Peggy and Bobby hello for me. :) I'll bet you're going to be really happy with your new compressor. Thanks for stopping by and taking a moment to leave me a comment - thank you.

@MrTPoops

3 жыл бұрын

@@javosgarage peggy and bobby said hi. But i ended up getting the kobalt 26 gal quiet compressor

@javosgarage

3 жыл бұрын

@MrTPoops - Too funny! That Kobalt looks like a really nice unit, I hope it does great for you.

I just bought one, you made my decision

@javosgarage

3 жыл бұрын

@Boosted Civic - Super glad to hear my video was able to help you. I'm still using mine constantly with no issues whatsoever and I hope yours does great for you as well. Thanks for stopping by and taking a moment to leave me a comment - much appreciated.

Hi, Thank you so much for this video. I am looking for a good air compressor and this video is very helpful. God bless you.

@javosgarage

3 жыл бұрын

@hawk362_Prince - Well thank you very much for the compliment. Super glad to hear my video was able to help you. Blessings are always welcomed here and appreciated. I really appreciate you stopping by and taking a moment to leave me some feedback - thank you.

Very informative video👍

@javosgarage

Жыл бұрын

Thank you for the compliment. I appreciate you stopping by and taking a moment to leave me a comment.

Definitely helpful.

I like your Daytona jack it's the one I have in my garage as well. Today I purchased a similar Husky compressor I think it's their newer model which puts out 200PSI it is the same 20 Gallon though and looks very similar to yours.

I'm looking at one of these to replace my 20 gal central pneumatic harbor freight compressor. It still works but tops at 120 psi and struggles removing lug nuts since I've gone to a 50 ft hose. It is also pretty noisy in my garage. I'm looking at bigger ones to but they all run at about $550.00 . This one looks good for the $ !!

Muchas gracias amigo. Excelente referencia. Saludos

@javosgarage

Жыл бұрын

Eres muy bienvenido y gracias por el cumplido. Me alegro de que hayas disfrutado del video. Gracias por pasar y tomarse un momento para dejarme un comentario.

Just paid $219.00 last week. Thank you for your video Sir! 20 gallon Husky. 200 PSI.

@javosgarage

3 жыл бұрын

@Charles Dvorak - Thank you for the compliment Charles! I hope your compressor does as well for you as mine has done for me. Thanks for stopping by!

I have this one also. I love it. My only complaint is really loud. I use it in my garage for mostly automotive stuff. I wear hearing protection so it's not a huge deal for me. If it kicks on in my garage, I can hear it in the house which is 20 ft across the driveway.

@javosgarage

5 ай бұрын

Agreed. It's very loud. Funny enough, I have since purchased a much larger Ingersoll Rand SS5 60 gallon compressor that is three times the size and it literally makes half the noise at best. This is a nice, smaller compressor but it's noisy. Thank you for stopping by and taking a moment to leave me a comment.

Grade A video! It really helped definitely appreciate it!

@javosgarage

4 жыл бұрын

@Outty 5000 hertz - Thank you very much. I am really glad you found my video helpful. Thanks for stopping by and taking a moment to leave me a comment - much appreciated!

@Outty5000Hertz

4 жыл бұрын

@@javosgarage no problem!

Great video! You helped me make up my mind! Little tip, tone down the overlayed music. If rather hear your information than generic youtube music. Thanks for the great video. Merry Christmas!

@javosgarage

5 ай бұрын

Thanks for the tip and the compliment!

Thanks for the video ! this unit caught my eye because of its shape and size I've been looking for a permanent compressor to install on the corner of the garage I don't need the huge one so this might do. I would together a bracket and mount it to the wall and then run Ridgid airlines to my different work benches ! The only thing that concerns me is noise. Don't want something really loud randomly kicking on 😂 Biggest question is is is this unit okay to just leave on or are you supposed to turn it off and empty it after every use

@javosgarage

4 жыл бұрын

@Reedith Graham - Thank you. I continue to like my compressor and it also continues to work well for me in my particular application. The compressor is noisy, no two ways about it. I'm fortunate in that I have a shed next to my garage so except for winter I place mine in the shed and have a line run into the garage. This is really nice because it totally eliminates the noise in my garage. The cold air in the winter causes too much condensation to build up so during the cold months I keep it in the garage. I leave my compressor on and I do a drain and flush (let it run for a few minutes with drain open while running) once a week. I did build a manifold that has an air dryer, filter and regulator along with shut off valves. My channel is too small for YT to allow me to post pics but I did setup an IG account. I will take a pic later today of my setup, post a pic there and provide you a link back here so you can get an idea.

@javosgarage

4 жыл бұрын

@Reedith Graham - I didn't forget about you! Been real busy and haven't had a chance to get your pics put up on IG yet. Hope to do it later today.

Would it be good for a plasma cutter?

Wish we could have heard it run.

@javosgarage

3 жыл бұрын

@Gordon McElvany - Hi Gordon. You know, I struggled with that idea when I was editing the video. In the end my thought was speakers on a computer wouldn't really be able to provide a realistic sound level so I decided to mute it rather than have the general noise for the viewers. I guess it would have been good to include a short clip of it running to help provide an idea of the noise. I appreciate the feedback because I will use your information to improve future videos. Thank you for stopping by and leaving me a great observation - much appreciated!

check out and review the new new husky 27 gal. 200 psi oil free portable vertical electric air compressor

@javosgarage

4 жыл бұрын

@Terri Rowlee - I will look into that and see if I can do something for you. It has a lot of the features I like that were missing on the 20 gal model. Thanks for stopping by and giving me a video idea!

I wouldn't trust this guys opinion. I've heard one of these compressors run, its very loud. He conveniently didn't once let you hear how loud it is.

Is husky dependable for continuous use?

@javosgarage

3 жыл бұрын

@Robert Munguia - Hi Robert. This is a "loaded question" and I'm sure it depends on who you ask, LOL. My personal experience so far is that it is doing great. I have had no problems with my compressor whatsoever. However, I don't really encounter heavy, continuous use that often so my experience may be different than what you would have. It does generally have 4 out of 5 star reviews on HD's website. My local HD store is really good with returns and I wouldn't hesitate to pick one up. If it doesn't perform as needed or concerns come up about reliability I would return it. Hope that helps you a bit. Thanks for stopping by!

I paid 219.00 and mine has rubber on the front feet. Does what I got it for won't use it with air tools much have battery impact driver and air rachet.

@javosgarage

4 жыл бұрын

@Pat Mason Mason - Interesting, wouldn't be the first time I've seen some variances in the "same" tools over the years. Wish mine would have come with the feet. I'm thinking I may make another video showing the mods I did to mine to make it work better for me. I'm with ya on the tools, since I picked up my 18v Rigid impact my air impact just collects dust, I've used it maybe three times of the last few years. Same with my air ratchet. I went to the Milwaukee M12 3/8" and haven't touched my air ratchet since. To me, electric is far better because I'm not running my compressor or tripping over air lines. Thank you for stopping by and taking a moment to leave me some feedback - much appreciated!

Thanks for the review. The background music in some of your videos is louder than your voice and hard to hear you.

@javosgarage

3 жыл бұрын

@Kentucky Cornbread - First off, love the YT handle! Nothings better than cornbread! I hear you on the music (no pun intended). Unfortunately, once the video is published I can't go back and edit that. I have a few videos where the music seemed fine when I was editing with my headphones but unfortunately was much louder with my laptop speakers (or vice versa) and I didn't notice until it was too late. I'm still a rookie at producing videos but I really am trying to improve with each new video. Whether it be sound, lighting, video quality or content I'm always looking to improve. Great critiques like yours help me do that so thank you for taking a moment to leave me some feedback. I do listen and keep it in mind as I move forward. Thank you so much for stopping by, I really appreciate it!

What’s the decibel rating? Btw - your background music is in the foreground and I can barely hear ya.

@javosgarage

4 жыл бұрын

@Duzzit Matter - The Husky is rated at 83 dBA and the DeWalt is rated at 78 dBA. My DeWalt seems to be a bit louder to me but to be fair the DeWalt is old so I'm sure it makes more noise than when it was new. Thanks for stopping by!

@javosgarage

4 жыл бұрын

@Duzzit Matter - I noticed the background music issue yesterday when I was looking for something in the video. I'm still really new to the editing end of things here but I'm trying to get better. The interesting thing is when I edited this video I had headphones on and used a different computer and it sounded just fine. Once I published it and listened on another computer the music is too loud. My goal was to just have it be background music, not make an MTV video! LOL! Sorry about the music, I wish I could change it now,

donde puedo conseguir los carbones o escobillas de este compresor?

@javosgarage

Жыл бұрын

Buena pregunta Miguel. Lo intentaría aquí - www.ereplacementparts.com/husky-c201h-gallon-175-psi-quiet-portable-air-compressor-parts-c-508437_508442_508792.html Es posible que tenga que enviarles un correo electrónico para obtener el número de pieza exacto para que pueda pedirlo. He comprado algunas piezas de este sitio web a lo largo de los años y siempre han sido buenas para mí. ¡Buena suerte, espero que encuentres tus partes!

Is it an oil less compressor?

@javosgarage

3 жыл бұрын

@Terence McCulloch - Correct. There really is no ongoing maintenance of this compressor outside of draining the tank periodically. Thanks for stopping by!

Husky or HF Mcgraw?!?! 🤔

@javosgarage

3 жыл бұрын

@chopers49 - Decisions, decisions... I know right?!?! I'm willing to bet you'll be happy with either one. Don't forget that Kobalt unit either! I would see who has the best sale going on right now. They're all really close in terms of specs so I would think it comes down to the features and pricing. I can tell you my Husky is still doing great with no problems and I'm very happy with it. I hope whichever you choose does great for you. Thanks for stopping by!

@chopers49

3 жыл бұрын

@@javosgarage Gracias Javo! I ended up getting the HF Mcgraw. I'm a weekend warrior, and I got a great Deal 👍! Hope I made the right choice! Thanks for your Videos keep up the great work!

@javosgarage

3 жыл бұрын

@chopers49 - I bet you'll be really happy with your purchase. I've also heard good things about the McGraw. Good luck with it, let me know what you think of it when you get chance if you would. I'm curious.

nice hat

@javosgarage

4 жыл бұрын

@Down to a Science - Thank you very much!

you cheated us by not recording the audio when it ran

@javosgarage

9 ай бұрын

Didn't mean to cheat you, it was so noisy it became somewhat distorted when I recorded it. Sorry!

This is supposed to be an honest review of the compressor but when you had the obvious chance to let us hear how loud it was real world filling up, which matters, you instead just continued giving us that annoying background music with a silent fill up. How are we to judge noise level that way?

Why are your hands greenish blue? Is this compressor a greasy mess or do you believe that covid lurks around every corner?