Hunting Knife Restoration.
Тәжірибелік нұсқаулар және стиль
Hunting Knife Restoration.
This hunting knife SOLINGEN was accidentally found in an old German shed and had been lying there for at least several decades.
The knife handle is broken and I couldn’t restore it, so I decided to remove it and made a new one from olive wood, as the woods’ structure is very beautiful.
I hope this video will be useful and interesting for watching :)
I am happy to receive any feedback on my work!
Thank you so much for Subscribe, Likes & Comments
Этот охотничий нож SOLINGEN был случайно найден в старом немецком сарае и пролежал там судя по виду как минимум несколько десятков лет. Рукоять ножа сломанная и я не мог ее восстановить, поэтому я решил заменить ее на новую из оливкового дерева, так как его структура очень красивая.
Надеюсь, это видео будет полезным и интересным для просмотра :)
Я рад любым отзывам о моей работе!
Большое спасибо за подписку, лайки и комментарии
Timestamps:
00:07 Inspection of old and rusty hunting knife
00:23 Disassembly and cleaning
01:20 Removing of deep corrosion on the blade using grinder
01:50 Hand sanding with sandpaper
02:56 Blade polishing using a felt wheel
03:39 Removing defects on aluminium knife handle with a file
04:09 Making a new olive wood knife handle
06:53 Fixing the knife blade
07:12 Gluing and assembly
09:16 Final result
Пікірлер: 132
Better. Than. New. Nice. Job. !!!
Brilliant. My late father left many valuable knife, 3 vintage knifes of solingen, in somewhat similar condition. Wish I could restore them like this. That's beautiful work, mesmerising.
@Atelier12D
Жыл бұрын
Thank you so much for your comment! 👍 If you need any help with restoration, you can always ask me
better than new
@Atelier12D
2 жыл бұрын
Thanks for the very nice comment! 👍 it really motivates me to keep making new videos!!!
Wow nice work
@Atelier12D
Жыл бұрын
Thanks for nice comment!!!👍👍👍
Класс! 👍
@Atelier12D
Жыл бұрын
Thanks for comment! 😍
That my friend is wonderful work. Your order of opperation had me a tad befuddled at times but every makers works their own way. The end results sure as hell shut me up tho...very VERY nice!!!!!
@Atelier12D
3 жыл бұрын
Dear Bobby! I am very VERY glad that you liked my work and video! 👍👍👍 This is a huge motivation for me!!! I would be glad if you subscribe to my channel. It will be interesting! 😉 Thanks!!!
That's pretty sick !!
@Atelier12D
2 жыл бұрын
Thank you so much!!!
nice work, this wooden handle looks beautiful
@Atelier12D
3 жыл бұрын
Henry, thanks for your comment! 👍 I am very glad that you liked my work! Now I'm making the new video of the next restoration, subscribe it will be interesting. 😉
Awesome First class restoration👍🏻👍🏻👍🏻👍🏻👍🏻👏👏👏👏⭐️⭐️⭐️⭐️⭐️
@Atelier12D
2 жыл бұрын
Thanks a lot for the wonderful comment! 👍👍👍 I am very glad that you liked my video!!!
Awesome job love it the handle is beautiful you know your stuff young man love your channel 👍👍👍😊😊😊♥️
@Atelier12D
2 жыл бұрын
Kelvin, you can't even imagine how much I enjoy reading your comments!
Nice!!!!
@Atelier12D
2 жыл бұрын
Thanks! 👍
Hello! Beautiful work! You did well to use the olive wood, it has a soft luster and sheen and it's grain is very beautiful...a very nice contrast to the rest of the knife...it looks like it came out of the factory...Good job!
@Atelier12D
2 жыл бұрын
Edgar thanks a lot! 👍👍👍 Your comment really motivates me to keep making new videos!
@edgaraquino2324
2 жыл бұрын
@@Atelier12D You are most welcome!
Nice job. I work a lit deferent I live in 3 word country Mexico. Wen I was Young a old American knife smith showed me the trate. He told me his grand father was from germane.
@Atelier12D
Жыл бұрын
Thank you very much for the nice comment from the beautiful Mexico!!! ❤️ I am very glad that my videos are interesting for you! I do love make restorations of Germany knives because of there high quality.
Excellent restoration and great looking handle scales. Thanks for the video
@Atelier12D
2 жыл бұрын
Thanks so much for watching and for the great comment! 👍I am very glad that you liked my video! 😍
Hella dope results, @Atelier12D!
@Atelier12D
4 ай бұрын
Thank you very much for your comment!❤️
Nice!!!
@Atelier12D
Жыл бұрын
Thanks for nice comment! 👍👍👍
@just-dl
Жыл бұрын
@@Atelier12D I guess that was literally a nice comment! :-) But, really...that blade scrubbed up beautifully...and the handle.
@Atelier12D
Жыл бұрын
And thanks again! I am very glad that you liked my work! 😍
I had one like that when I was a teenager back in the 70's. I can't remember what happened to it.
@Atelier12D
2 жыл бұрын
Hey, thanks for sharing your memories. I love items from 70’s, they have unique spirit and great quality.
Good restoration
@Atelier12D
2 жыл бұрын
Tanks! Happy new year! 🎆
Nice job!
@Atelier12D
3 жыл бұрын
Thanks! 👍😉
That’s a superb job and love the grain in the handle, very stylish!!
@Atelier12D
3 жыл бұрын
Thank you for very nice feedback! It motivates me to make more restoration videos. 🙏👍
Nice restoration! But I'd use natural horn for handles. Also, make some sheath for it :D
@Atelier12D
3 жыл бұрын
Thanks for the nice comment! 👍👍👍 I already made a sheath for a knife, but this process was not filmed. I will add it next time.
Nice restoration. I was wondering if you were using a flat top punch to tap in the the brass pins? Or did you have something else?
@Atelier12D
3 жыл бұрын
Dear Curtis, thank you for a feedback! You are right, in a video I use special punch with a recess for the rivet head to tap in the brass pins. If you stop the video exactly at 7:57, you can see it. The video is speed up and it is very difficult to see this moment. My mistake, I forgot to slow down it.
I can't say as I've seen it done in this order before. Nonetheless, it came out beautiful. Well done!
@Atelier12D
2 жыл бұрын
Thank you so much for your comment, it motivates me to keep doing!
Superb job that handle is beautiful you sure know your stuff mate 👍👍👍😊😊😊♥️
@Atelier12D
2 жыл бұрын
Buddy, I really appreciate your comments! ❤
Outstanding work! Keep it up.
@Atelier12D
Жыл бұрын
Thank you very much for nice comment!!! 👍👍👍 I will keep doing!
make a nice knife
@Atelier12D
3 жыл бұрын
Thanks!
The handles are really awesome! Good job!
@Atelier12D
3 жыл бұрын
Martin, vielen Dank für einen schönen Kommentar!!!
Awesome work! The knife handle is very beautiful)
@Atelier12D
3 жыл бұрын
Thanks!
I wasn't to sure the light colored cross-grain wood handles were going to work, but it looks very nice. Thumbs Up!
@Atelier12D
3 жыл бұрын
Gary, thank youfor your comment. I also wasn't sure, but decided to try. Happy that it works. Cheers!
Stunning!
@Atelier12D
3 жыл бұрын
Thanks a lot for the comment! 👍😊
Wow very nice my friend
@Atelier12D
3 жыл бұрын
Thanks!!! 👍
Eine wirklich klasse Arbeit 💪
@Atelier12D
3 жыл бұрын
Vielen Dank für die gute Bewertung meiner Arbeit! Das freut mich sehr und das motiviert mich stark neue Videos zu machen! Liebe Grüße!
@ZyKnife
3 жыл бұрын
@@Atelier12D Herzlich gerne. Danke für dein tolles Video.
Very good job
@Atelier12D
3 жыл бұрын
Thanks!
Nice work
@Atelier12D
3 жыл бұрын
Thank you!
Would be nice to see your knives etc being sharpened and final edge, but great video restoration.
@Atelier12D
3 жыл бұрын
Hi Alan! Thanks for the comment! 👍👍👍 I will definitely add final knife sharpening and tests to my next videos.
@Smirnoff44
3 жыл бұрын
@@Atelier12D that's good news 👌👍
Nice and complete
@Atelier12D
3 жыл бұрын
Thank you!
Oh yeah 👌 😍
@Atelier12D
3 жыл бұрын
Many thanks!!! 😊
Amazing job brother
@Atelier12D
3 жыл бұрын
Thanks for the comment bro! 👍 This motivates me to make new interesting videos!
Great work!👍
@Atelier12D
3 жыл бұрын
Thank you for a feedback! It motivates me a lot!
Sehr schöne Arbeit. Respekt! Eine Sache würde ich gerne mal verstehen: warum kommt die Klinge in Entrosterflüssigkeit, wenn hinterher ohnehin runtergeschliffen und poliert wird? Welchen Sinn macht das?
@Atelier12D
Жыл бұрын
Vielen Dank für den Kommentar! 👍 Ich mache eine Rostentfernerbehandlung, um Rost aus tiefen Poren zu entfernen. Bei der Bearbeitung auf einer Schleifmaschine werden diese Poren durch die obere Metallschicht verschlossen. Die Klinge sieht sauber aus, aber mit der Zeit kann wieder Rost auftreten.
@TommyTulpe66
Жыл бұрын
@@Atelier12D Danke für diese Erklärung.
@Atelier12D
Жыл бұрын
Bitte! 👍
Desculpe, não acho que uma lâmina nobre como a Solingen deva ser trabalhada com lixadeira mecânica. Minha opinião... Saudações 🇧🇷
@Atelier12D
2 жыл бұрын
Obrigado pelo seu comentário. 👍 Vou manter isso em mente no futuro!
Nice restoration, you did a pretty good job on it.
@Atelier12D
3 жыл бұрын
Thanks!
Top Video.Good Job.✌️💪🇩🇪👍
@Atelier12D
3 жыл бұрын
Dear Kay! Thank you for your support! It is a huge motivation for me to make new videos.
@kayhenkel8190
3 жыл бұрын
@@Atelier12D Very Good Man.💪👌👍🇩🇪☝🏻🔪⚔️
@Atelier12D
3 жыл бұрын
Thanks!!!
Well done
@Atelier12D
3 жыл бұрын
Thank you!
Muy buen trabajo pero me hubiera gustado más con las cachas de cuerno
@Atelier12D
2 жыл бұрын
Muchas gracias por su comentario, en los próximos videos lo tendré en cuenta.👍
nice job!
@Atelier12D
3 жыл бұрын
Thanks!
Well done bro
@Atelier12D
3 жыл бұрын
Thank you Richard!
Gute Arbeit!
@Atelier12D
3 жыл бұрын
Dankeschön!
Лучше чем был..
@Atelier12D
3 жыл бұрын
Spasibo)
Хвостовик клинка никак не закреплён в рукояти против боковой нагрузки (изгиба),болтается,его держат только накладки.Это как понять?
@Atelier12D
3 жыл бұрын
Михаил, здравствуйте! Спасибо за комментарий. Согласен с Вами на счет боковой нагрузки. Этот вопрос надо задать изготовителю, т.к. я только реставрировал, не внося изменений в конструкцию. С другой стороны, с нарезкой колбаски нож прекрастно справляется, если поломается, то будет новое видео о модификации на канале. :)
La idea era colocarle el asta de venado
@Atelier12D
Жыл бұрын
¡Gracias por el comentario! 👍👍👍
Recovery knife like manufacturer
@Atelier12D
3 жыл бұрын
Many thanks for the good assessment of my work!!! 👍
Gut gemacht! Aber heute hast Du mich echt aufgeregt!
@Atelier12D
3 жыл бұрын
Vielen Dank für den Kommentar!!! 😜
La idea era dejarlo original con astas de venado
@Atelier12D
Жыл бұрын
Thank you for your comment! 👍 I love working with wood knife handles. In the next restorations, I will take into account your wishes.
Изделие красиво будет смотреться за стеклом , при освещении приборов - ровесников .
@Atelier12D
3 жыл бұрын
Спасибо!
Uraaaaaaa
@Atelier12D
2 жыл бұрын
Uraaaaa! 🤣 Thanks for your comment!!!
I’m glad how you did the handle. Whoever dud the original stag handle should be ashamed of themselves
@Atelier12D
3 жыл бұрын
Thank you very much for your comment! 👍 Unfortunately the original handle was from plastic and I didn't have a stag horn, that's why I decided to remove it and make the new one from olive wood.
Зачем мучился, вымачивал, если потом на гриндере все счистил.
Не реставрация, а переделка..
Ugh, the horn was better
@Atelier12D
Жыл бұрын
Thank you very much for your comment! 🙏 I really wanted to make an olive wood handle...
Subcribe
@Atelier12D
3 жыл бұрын
Thanks!
Schlecht
@Atelier12D
Жыл бұрын
Danke für den Kommentar