Whoa. A wonderful Bell 205 model with scratch build mechanics, scratch-built scale fuselage, and competently flown in a scale-like manner, all by the same person. My hat is off to this gentleman, this has got to be one of the coolest achievements by a sigle person I have seen in RC heli hobby.

@DCT_Aaron_Engineering

6 жыл бұрын

Thank you so much for your kind comments. I will pass on your message to the modeller. Cheers, Aaron.

Wow seems like such an understatement! Well done!

@DCT_Aaron_Engineering

9 жыл бұрын

Richard Morin Thanks Richard, I'll pass on your compliments to Michael. Cheers, Aaron.

Nice show!

@DCT_Aaron_Engineering

5 жыл бұрын

Thank you Sergio ;-)

That's your own design sir? Amazing. I love huey.

@DCT_Aaron_Engineering

Жыл бұрын

Thank you 🙏

Amazing work... deep respect for the builder !

@DCT_Aaron_Engineering

9 жыл бұрын

Hey man, thank you very much. I will pass on your regards to the Michael. Cheers, Aaron.

Man I always stop by and admire this chopper from time to time beautiful

@DCT_Aaron_Engineering

8 жыл бұрын

Hey mate thanks for dropping in on my channel. Have you seen the other big RC choppers videos I have? Check out the playlist on my channel. Cheers Aaron

@newenglandfb3995

8 жыл бұрын

+DCTTeacher1 I've seen um all lol

@DCT_Aaron_Engineering

8 жыл бұрын

+New England Fb lol that's awesome. Thank you

Great footage

@DCT_Aaron_Engineering

5 жыл бұрын

Thank you :-)

Beautiful helicopter! Great color scheme. LAFD has an awesome air division and paint their birds pretty bad ass. Great recreation.

@DCT_Aaron_Engineering

9 жыл бұрын

saul alvarado Hi Saul, thank you for taking the time to watch my video and for commenting. Agreed, the LAFD really have some awesome paint schemes. I will also pass on your comments to Michael. Great talking to you. Regards, Aaron (Melb, Aust).

Just awesome, that is by far one of the best scale heli's i've ever seen, fantastic job all the way around mate

@DCT_Aaron_Engineering

8 жыл бұрын

+Luvtoflyhelis G'day mate, thanks for your kind comments. Michael is very proud of his scale helicopters. He's currently building two large Bell 47G's. I can't wait to fly one. I will soon upload another video of Michael's super scale Lama. Cheers Aaron.

Beautiful rc helicopter! 👍

@DCT_Aaron_Engineering

5 жыл бұрын

HeliChrissi RC Thank you 😊

Very sweet my freind!!!!✌

@DCT_Aaron_Engineering

3 жыл бұрын

Much appreciated John cheers 🍻

Very cool! Thank you!

@DCT_Aaron_Engineering

8 жыл бұрын

Hi Jim, you're very welcome mate. Glad you enjoyed the video. Make sure you pop back to my channel from time to time as I've got a couple of new videos coming up real soon. Two scratch built XL Bell47G scale helicopters and a XXL Bell Jetranger. Cheers, Aaron.

Incredibly beautiful,I can't even make a proper pancake meanwhile this guy's making his own scale helicopter.

@DCT_Aaron_Engineering

7 жыл бұрын

Hello Col. Your comment made me laugh. Only because I think of myself just the day making some scones for some friends that I had over for morning tea. They looked like roadkill but apparently my guests liked them. Mmmm, or maybe they were just being polite. Thanks for watching. I have some other big RC helicopter videos in my playlist. Did you see the big Bell 47's (MASH) choppers that Michael also built? Cheers, Aaron.

Well that just rocked .

@DCT_Aaron_Engineering

8 жыл бұрын

+jsilence418 Thank for watching and for taking the time to comment. Kind regards, Aaron.

@JohnDoe-oh4dk

6 жыл бұрын

DCTTeacher1 is there a website or something I can get this at. Or buy all the parts

One supremely talented builder! not so much as a hint of a vibration - even at shut down.

@DCT_Aaron_Engineering

8 жыл бұрын

Hi Ralph, yes he does an excellent job. Michael has just built twi Bell 47G's. They are totally awesome. I will upload a new video soon. Cheers

Awesome great work.,👍

@DCT_Aaron_Engineering

6 жыл бұрын

Thank you Abu. We appreciate your feedback ;-)

looks like and sounds like the real thing from the inside , very nice well done

@DCT_Aaron_Engineering

7 жыл бұрын

Hi Brian, thank you very much. Glad you liked the video. Cheers, Aaron.

@brianbrown4965

7 жыл бұрын

cheers , to be there to see it fly would make my day a work of art . thanks a.

@DCT_Aaron_Engineering

7 жыл бұрын

Thanks Brian. Yes it was great to see this big bird fly. Mick has since sold this large helicopter. However, did you see the other helicopter (Bell Jetranger) video that I uploaded? It's even bigger than this one.

awesome, very nice model 👍👍

@DCT_Aaron_Engineering

7 жыл бұрын

Thank you Tom ;-)

Awesome!!✌🇺🇸

@DCT_Aaron_Engineering

3 жыл бұрын

Thank you John and greetings from Australia 🙏.

Cool video and neat helicopter it's cool

@DCT_Aaron_Engineering

8 жыл бұрын

+Steve Horsham Hi Steve, thanks for watching and providing positive feedback. Cheers, Aaron.

nice video and heli and good creation

@DCT_Aaron_Engineering

8 жыл бұрын

+Frenk Sanga Hi Frenk, thanks for watching and for providing feedback. Much appreciated, Aaron.

AWESOME HELI!!!!

@DCT_Aaron_Engineering

6 жыл бұрын

Thanks Jack ;-)

One word Awsome !

@DCT_Aaron_Engineering

7 жыл бұрын

Thank you Behdad. Have a great day ;-)

So nice! I would love to have a scale heli like this one day!

@DCT_Aaron_Engineering

9 жыл бұрын

***** Thanks man, I appreciate your feedback. Cheers ;-)

Bloody great job ,the workmanship is excelent well done Mick,keep up the good work. That club you are in has a great buch of members to by the way, just thought i would mention it.

@DCT_Aaron_Engineering

9 жыл бұрын

blackpowderize Thanks mate. I'll pass on your nice comments to Mick. He's a top bloke and a bloody talented builder. Cheers, Aaron.

Amazing work Sir. 🙂

@DCT_Aaron_Engineering

4 жыл бұрын

Thanks a lot 😊

That thing is beautiful

@DCT_Aaron_Engineering

9 жыл бұрын

Daniel Isabelle Hi mate, thanks for support. Michael did an awesome job on this machine. Cheers, Aaron.

Fantastic Model Big thumb Up :) very nice details.!

@DCT_Aaron_Engineering

9 жыл бұрын

***** Hey man, thanks for the thumbs up and feedback. It's very much appreciated. I will pass on your comments to Michael when I see him next. Cheers, Aaron.

thmbsup,, great work!! love it....Nice hobby ;O)

@DCT_Aaron_Engineering

8 жыл бұрын

Hi Edwin, thanks for the support and thumbs up. It's much appreciated, kind regards, Aaron 👍

Que maravilla, tan detallado ,realmente espectacular...parece tan real .felicitaciones por tu modelo..el fabricante es todo un artista...

@DCT_Aaron_Engineering

2 жыл бұрын

Hola, gracias por mirar. Sí, hizo un trabajo increíble en este helicóptero a gran escala. Tengo muchos otros en mi lista de reproducción. Publicaré el enlace a continuación. Salud, Aaron. kzread.info/head/PLSlaZsvoFvDoQ-PQxpmjx_xwE__1siNu-

@ricardoleyton4913

2 жыл бұрын

Y tiene un costo alto me imagino...yo solo tengo maquetas ..que hermosa maquina..la verdad nunca e visto uno de cerca..te felicito nuevamente.y .tienes mas videos ??

@DCT_Aaron_Engineering

2 жыл бұрын

@@ricardoleyton4913 Hello and thank you. More large RC helicopter videos in the link I provided in the previous comment. Cheers, Aaron.

Amazing! 😳

@DCT_Aaron_Engineering

7 жыл бұрын

Thank you very much ;-)

@RUSSIARCCHANNEL

7 жыл бұрын

Not problem, because it's amazing helicopter. Real great, no...GREAT work. I love it. I love scale(my hobby is crawler), but it one of greatest heli of I see

@DCT_Aaron_Engineering

7 жыл бұрын

Thanks man I really appreciate it. I like your RC car collection. Great to see that you don't mind getting them muddy. I thought it was real for a moment :-)

@enisahuseinovic6872

7 жыл бұрын

hello your

Sweet rc heli indeed

@DCT_Aaron_Engineering

5 жыл бұрын

The Truth Thank you 😊

@thetruthhurts4054

5 жыл бұрын

@@DCT_Aaron_Engineering welcome. Hey question if you don't mind. I have alot of experience with nitro cars ie 1/8th scale 1/10th scale off and on road but know absolute zero about helis. I purchased a blade sr uh1 Huey from a guy who never flew it. When I throttle up and around mid stick it starts to get light on the skids but tends to drift to the left. Swash plate is level on the horizontal and very very little tilt forward. Some say it's normal I've read it is electric with ccpm. What is your opinion. Am I not being to aggressive with the throttle? It is set for normal flight mode and low rate. I've read you are suppose to almost snap it up to get out of the bad rotor wash but I'm kinda scared it goes psycho on me? Your opinion plz?

@DCT_Aaron_Engineering

5 жыл бұрын

Hey buddy, it sounds correct. If it's set up old school it should have -2 degrees pitch bottom stick, +5 degrees pitch mid stick and +10-12 pitch top stick. This is different then a modern 3D pitch curve. I suggest getting a flight simulator and practising on that first. Otherwise, I suggest going to your local RC model club and ask for help. If you've never hovered before, you will need a trainer undercarriage. I suggest getting help before you fly it again. Otherwise it will just end up in the bin. Cheers, Aaron.

@thetruthhurts4054

5 жыл бұрын

@@DCT_Aaron_Engineering appreciate it. I will get with my local hobby shop bc my transmitter is the old hp6dsm. Throttle curves are preset on it. Thank you for advice I will follow it. Great heli you got there indeed.

@DCT_Aaron_Engineering

5 жыл бұрын

You're very welcome buddy. Best to get assistance mate, you don't want to crash her. Thanks man, this chopper belongs to my good mate Michael. I've heaps of other big scale helis on my channel if you check out my playlist. Cheers, Aaron.

beautiful machine!

@DCT_Aaron_Engineering

8 жыл бұрын

Hello Phillip. Thank you, glad you enjoyed the video. Hopefully I'll have a new one uploaded soon over the next couple of weeks. Cheers Aaron

@denzelmantoys-industriallt316

8 жыл бұрын

hello dcttecher 1

@DCT_Aaron_Engineering

8 жыл бұрын

Vintage toys-melbourne australia-victoria Hi mate, is this Denzel?

@denzelmantoys-industriallt316

8 жыл бұрын

yes

@DCT_Aaron_Engineering

8 жыл бұрын

Vintage toys-melbourne australia-victoria Ok cool. I didn't recognise you as you must have changed your KZread name. Cheers, Aaron

This awesome OMG

@DCT_Aaron_Engineering

7 жыл бұрын

Thank you Fabian ;-)

Some stripes on the blades would be also nice. Anyway....beatiful Heli ! Nice flying and no crashes :) Greetings from germany

@DCT_Aaron_Engineering

9 жыл бұрын

MStreppelhoff Hello and thanks for watching. Always great to hear from people from the other side of world. I will tell Michael to paint some stripes on his blades. All the best. Regards, Aaron.

Hi Aaron, thnx 4 the quick reply bak & was really after the nose angles, measurements, shape(s), etc & was wondering if Michael was able 2 help me out with these, but will understand if he can't & admire his great talent & a amazing machine he has built, thanks again Rocky.

@DCT_Aaron_Engineering

9 жыл бұрын

Donna Oshea Hi Rocky, I will send you a PM to your channel now.

2:25 So this is why your Heli flies so perfect :D GERMANY hehe. really nice Scale Heli !

@DCT_Aaron_Engineering

7 жыл бұрын

Hi David. Thank you for watching my video. Yes, Michael builds very nice helicopters and this one was moulded off an original Vario (I think?). Mick does all his own fibreglassing from making the plug, building the mould and completing the FRP layup. It's always a pleasure talking with other fellow modellers. Cheers, Aaron.

you can fly it so well

@DCT_Aaron_Engineering

8 жыл бұрын

+Ethan Passman Hello Ethan, I wasn't the one piloting the RC helicopter, it was my friend Michael. He built this machine from scratch. I will pass on your kind comments to him. Thanks for watching :-)

@ethanpassman4104

8 жыл бұрын

u r welcome

Good

@DCT_Aaron_Engineering

4 жыл бұрын

Thank you 🙏

This is fantastic! The detail is phenomenal. Very nice job, sir. This has to be one of the top Bell scale build 205's I have seen, either in person on on the web. How many hours of construction?

@DCT_Aaron_Engineering

9 жыл бұрын

rodcre8s Hey man, thanks for the positive feedback. I agree, Michael, the builder & owner did an awesome job of his scale Bell Huey. I'm not sure of the hours, but I as guess I would say a couple of hundred. Cheers, Aaron..

That is an absolutely beautiful heli! Beautiful craftsmanship, and build quality. What size motor did you put in it? Sounds awesome, and does seem to have quite a bit of power.

@DCT_Aaron_Engineering

7 жыл бұрын

Thank you very much. Yes Michael does brilliant work. The model uses a petrol powered 28cc Zenoah engine. Because most scale models tend to be slightly overweight they do not have the power of a Pod & Boom helicopter. Therefore, you have to be on them and fly them accordingly. Have a great day ;-) Cheers, Aaron

Good idea to make this things...

@DCT_Aaron_Engineering

8 жыл бұрын

+Weetalij Catzoora Thank you ;-)

Hi DCTTeacher1, thats one awesome UH-1 helicopter your friend has & am a huge fan of the Huey & was wondering how i can get hold of Michael to see if he could help me out with some more dimensions for this size huey as i'm in the process of building one but just for ornamental purposes. Bell Company don't give out much info, thanks Rocky

@DCT_Aaron_Engineering

9 жыл бұрын

Donna Oshea G'day Rocky.Thanks for watching my video. I'm also a huge fan of the Huey. It was a marvelous machine. I have spoken to Michael regarding your question and he has explained how he does it. Simply purchase a 1/35 scale plastic kit from a toy shop and then you measure the plastic model and multiply your measurements by 35 to obtain the 1:1 size. Hope this helps? Cheers, Aaron.

awesome as hell...but... you gotta get a different camera or different setting on your current one because those rotors look horrible... but the build, and model are fantastic! Great job!

@DCT_Aaron_Engineering

6 жыл бұрын

Thank you. I shot this video a really long time ago now using my iPhone. I've since got way better camera gear. Thanks for the feedback. Cheers, Aaron.

Nice Bell UH -1Huey Helicopter. Where is your scale flight controls in the cockpit? Your main rotor head rotates in the wrong direction. Bell helicopters rotate in a "counter clockwise" direction. Where is the "stinger" on the end of the tail boom??? Ya need a turbine jet engine. Nice model, nice flight, & job well done!

@DCT_Aaron_Engineering

4 жыл бұрын

Hey Rodney. Thanks for watching. Yeah, lots of scale detail missing, but still a nice looking model 👍

@truckerray7533

4 жыл бұрын

@@DCT_Aaron_Engineering Yes absolutly indeed. Very impressed with this build. lots of time, money, effort, & swear words went into this beauty. Thankya for sharing.

Well, Bell would be delighted if he happens to see this scale model fly.. But I noticed the clockwise rotation of the Main rotor and the tail rotor is on the LH side? I think its the opposite rotation and the tail rotor is on the Right Hand Side I guess..maybe its like australia has Right Hand Drive...but well I hope someday to build like this one too..In the end Hats Off to you gentlemen.

@DCT_Aaron_Engineering

5 жыл бұрын

Hello and thank you for your kind comment. Yes Michael builds certainly builds some really impressive models. Take a look at the large Bell 47G's he built here kzread.info/dash/bejne/eZyW27yfg8awYdY.html Good pick up. Depending on the model, some Huey's have the tail rotor on that side. Unfortunately we are stuck with that main rotor rotation due to blades and gearing etc. Ok, thanks for watching and have a awesome day. Cheers, Aaron.

I also wanted to get into the rc hobby because of amazing aircrews like this one tho I'm curious how do these guys build amazing vehicles like this.Where do you start from?

@DCT_Aaron_Engineering

9 жыл бұрын

Skit10daddoleSucker Hey man. Flying RC Helicopters is a great hobby. You meet new people and the support / comradely from other modelers is fantastic. Basically everyone starts out flying pod & boom and once you become proficient many move into scale modeling or hard core 3D. Michael is the owner and builder of this helicopter. He is a master builder and he scratch builds all his models. He uses fiberglass in the majority of his builds. Thanks for watching my video. Cheers, Aaron.

I would like to see your friend try his hand at building a full collective and cyclic co-axial helicopter like a Kamov KA 50 or Sikorsky S-97 Raider.

@DCT_Aaron_Engineering

7 жыл бұрын

Hey mate, we have another member of our group who has built his own co-axial helicopter. Full blown collective and cyclic pitch. I should do a video on it. He built around a Raptor pod and boom. Cheers Aaron

Can i put a camera in it and have a go flying it my way. Beautiful work and great video.

@DCT_Aaron_Engineering

9 жыл бұрын

AUTOSKIDS Now that would be cool to fly it FPV style out the back of your van. However, I don't think my mate Michael would agree to it hahaha Cheers, Aaron

@AUTOSKIDS

9 жыл бұрын

DCTTeacher1 HAHA Aaron. If i was your mate Michael, I wouldn't let some cowboy fpv flyer "HAVE A GO" either. But one thing i would love to see is the view from a camera mounted on a pan and tilt system inside the cab. That could be done without risk and if i was around i would offer to do it. How is( my) honda chopper going? Have you made that gear yet?

Beautiful plane ( helicopter) 2 things that would have made it better 1. Turbine jet 2. A sweet flare upon landing ....I have a miniscule amount of stick time in a UH 1 D as well a Hughes MD 500 NOTAR and Hughes 500 ( Little Birds. Thank you 160Th and a CW5 that imparted a vast amount of time expertise and a crap load of patients and knowledge. I now know just enough to take off, land, and fly VFR and IFR ( trust your instruments ) they never lie!!!!!!!

@DCT_Aaron_Engineering

9 жыл бұрын

William Lapo Hey William. Agreed turbine mechanics would look and sound awesome, unfortunately they're a whole different issue. There is cost, complexity and also certification required to operate turbine models. Hey, Your experience in real aviation sounds awesome. We play with models, but you actually do it for real. Do you have some videos on KZread? I will check out your channel. Oh, check out Earl Watters channels. He does heaps of heli flying (Jet & Long Rangers, Sky Crane, and MD). Thanks for watching. Cheers, Aaron.

Its like a big model of v931 rc helicopter

@DCT_Aaron_Engineering

6 жыл бұрын

Hi Carl, yes it certainly is a big chopper. Check out some of the other big helicopters that I have on my channel too mate. The Jet ranger is even bigger. Cheers, Aaron.

@mlmontage4869

6 жыл бұрын

Ok dude

Just wondering if you could use the large turbine fuselage that Vario do and install the Benzin mechanics to get the same results?

@DCT_Aaron_Engineering

9 жыл бұрын

smiffy788 Hi mate, most definately you could. However, you would have to modify the mechanics. Most of Michael's large scale RC choppers have a modified or self made petrol (benzine) mechanic. Cheers, Aaron ;-)

awesome sir i want to learn how to make small kids helicopter. Please help...I m studying in b tech 3year please give me instructions. .

@DCT_Aaron_Engineering

8 жыл бұрын

+Furquan Raza Hello and thanks for watching. Making a helicopter like this is very complicated and it requires a wide skill set such as CAD Design, fibreglassing, machining and mechanical aptitude. I would suggest joining your local hobby club and ask for assistance from your fellow modellers. All the very best. Aaron.

47g's !!!- By the same guy who made that Huey? The waiting is unbearable!

@DCT_Aaron_Engineering

8 жыл бұрын

Hey Ralph, you made us laugh. I just came back from the field with Mick where I showed him your comment. Hey, check out my Instagram account under the same user name. I have pics of the Bell's and a short video clip. Cheers Aaron

Can you provide any info on how you designed you tail mechanics?

@DCT_Aaron_Engineering

9 жыл бұрын

tonyg981 Hi Tony. Michael uses a Jakadoski tail rotor gearbox on his large Huey. Hope this helps you? Cheers, Aaron.

Thanks for reply..I want to make a project for kids helicopter. ..remote controls ... 1st how to make circuit. in which what components required. .how to made...Please give me instructions. ..

@DCT_Aaron_Engineering

8 жыл бұрын

+Furquan Raza Hello Furquan, please note that these model helicopters aren't toys and they're aren extremely dangerous. Not recommended for young children. I'm sorry but I don't have any instructions.

1/6 scale !

@DCT_Aaron_Engineering

7 жыл бұрын

Hey Sando, I think this helicopter might actually be 1:7 scale :-)

7 жыл бұрын

Beautifull Huey !

@DCT_Aaron_Engineering

7 жыл бұрын

Thank you Sandro ;-)

gostei

@DCT_Aaron_Engineering

8 жыл бұрын

Thanks mate

Incredibile hely ! Engine size?

@DCT_Aaron_Engineering

Жыл бұрын

I think was a Zenoah PUH-26cc engine

nice helicopter, i don't know how to fly, i would love to learn i have a small one but i don't used it that much, i'll love to have one like yours. where can i buy one? and how much would it cost?

@DCT_Aaron_Engineering

8 жыл бұрын

+Ricardo Espinoza Hi Ricardo, thanks for watching and posting a comment. This helicopter was scratch built by Michael using a fibreglass fuselage and mechanics that he made himself. To purchase something like this would anywhere from $3K - $6K. Cheers, Aaron (Melbourne, Australia)

hello nice heli can u plz make a tutorial of how you can fix a rc heli coz i cant turn my heli to right or left plz and well done.

@DCT_Aaron_Engineering

8 жыл бұрын

Thanks for your feedback and support. I suggest you take your Heli to your local flying club and ask for assistance. Cheers

@pootis818

8 жыл бұрын

thx so much

I wonder what scale that is ?

@DCT_Aaron_Engineering

6 жыл бұрын

Hi James, I can't actually remember now. But the model is an exact copy from a Vario gas mechanic body. So I think it could have been 1:5 but don't quote me on that. Cheers, Aaron.

Can I build this using my ceiling fan motor?

@DCT_Aaron_Engineering

8 жыл бұрын

Nah mate, you'll need more horsepower than that ;-)

@styxnexus

8 жыл бұрын

+DCTTeacher1 : Thank you sir for replying.How much HP do we need.Also,how much is the maximum height your awesome machine can attain ?

@DCT_Aaron_Engineering

8 жыл бұрын

+VIKAS SINGH Hello Vikas. The petrol engines in these helicopters are made by Zenoah (Komatsu industries) and they are approximately 23cc - 30cc in size which is about 5-6 horsepower. In Australia you must fly your radio control helicopter and keep it within line of sight. However, I think the maximum range is about 4km. Have a nice day Vikas and thanks for watching my videos. Kind regards, Aaron.

thanks friend no problem I need your help to made one. or I want you to make one for me and my children thanks

@DCT_Aaron_Engineering

7 жыл бұрын

Hi Khalid, I'm sorry but it my friend who makes them. He's not making them at the moment.

how much does somethig like this cost ?

@DCT_Aaron_Engineering

7 жыл бұрын

Hi Mike, it depends if you purchase a kit from Vario or a similar company. You usually have to supply your own mechanic (motor & frames) and purchase the fueslarge kit for $1K. Michael made this scale helicopter himself (fibreglass and mechanics) for approximately $3K - $5K

Does the power is petrol zenoah 26cc?

@DCT_Aaron_Engineering

2 жыл бұрын

Yes it uses a Zenoah PUH26 motore. Cheers, Aaron

@chuck6753

2 жыл бұрын

@@DCT_Aaron_Engineering what's the length of the main blade ?and the weight of the Heli?Thanks

Is this for sale yet?

@DCT_Aaron_Engineering

5 жыл бұрын

Hello. Sorry this machine was sold approximately 2 years ago.

@pofrani

5 жыл бұрын

DCTTeacher1 aww crap! Can you message me and tell me how much it sold for pls?

@DCT_Aaron_Engineering

5 жыл бұрын

pofrani hi mate. This completed model sold for $5.5K aud. He can supply a fibreglass fuselage (unfinished pulled from the mold) for $700.

where can i buy one of this?

@DCT_Aaron_Engineering

7 жыл бұрын

Sorry mate this was scratch built by the owner and it has now been sold. You can buy a similar machine from a company in Germany called Vario. Thanks for watching :-)

where did you buy it? and how much?

@DCT_Aaron_Engineering

8 жыл бұрын

Hello, Michael didn't buy this helicopter he built the entire thing himself. It probably cost a couple of thousand dollars to build, but it's worth much more. Thanks for your interest. Cheers Aaron

@klee9289

8 жыл бұрын

how to build something like that? It is very hard

if I want buy one how much it cost

@DCT_Aaron_Engineering

7 жыл бұрын

Hi Khalid, this helicopter has now been sold. I'm not sure how much it is worth. I think it was between $3K - $5K. Thank you for watching ;-)

how much it cost friend

@DCT_Aaron_Engineering

7 жыл бұрын

I will ask my friend how much

how much you spend on it

@DCT_Aaron_Engineering

6 жыл бұрын

Hi Rey, I'm not exactly sure mate. My friend Michael built this helicopter himself. If I had to guess maybe $5000. He has sold this model now. Regards, Aaron.

👍🇺🇸🏈🏈🏈🏈🏈🏈🏈🏈 that's an helicopter I could find a nice used for that how much storage space does it have and I'm back out

@DCT_Aaron_Engineering

7 жыл бұрын

Thank you :-)

@jameslane9918

7 жыл бұрын

really enjoyed the view nice Chopper James Lane across the street from the downtown Airport Kansas City Missouri

@DCT_Aaron_Engineering

7 жыл бұрын

Hi James nice to meet you. I live in Melbourne Australia. Yes Michael makes some very nice models and the attention to detail is exceptional. Cheers, Aaron.

What price

@DCT_Aaron_Engineering

3 жыл бұрын

Approx $3K-5K aud as it was scratch built

glow engine

@DCT_Aaron_Engineering

6 жыл бұрын

Zenoah 26cc petrol engine made by parent company Komatsu

@alicialehoux4796

6 жыл бұрын

should use turbine

@DCT_Aaron_Engineering

6 жыл бұрын

Not my model. Plus Turbine cost approx $6K - $10K here in Australia ;-)

please tell me how can i buy like it or build like this ?

@DCT_Aaron_Engineering

8 жыл бұрын

Hi Abdallah, thanks for watching. This helicopter was scratch built by Michael. He used fibreglass and a mould to make the fuselage and sourced many different parts for the mechanic. He no longer has this model as it was sold to a collector last year. Have a nice day and thanks for commenting. Regards, Aaron

@gregotto2621

7 жыл бұрын

+DCTTeacher1 how much would it cost to pay him

@gregotto2621

7 жыл бұрын

+That Guy Greg to you know sell and ship one of those

@DCT_Aaron_Engineering

7 жыл бұрын

Hi Greg, this helicopter has now been sold.

@DCT_Aaron_Engineering

7 жыл бұрын

Hey Greg, I clicked send to quick. Depending on what stage you would want it completed. For example, just the fibreglass body or a complete painted and flying chopper up to $10K AUD.

Would be way cool with a turbine. A Huey shouldn't sound like a weed whacker.

@DCT_Aaron_Engineering

7 жыл бұрын

Hello Bellboy, Thanks for watching and commenting. To be honest, yes I agree with you. But when you have limited resources and money unfortunately the "weed whacker" is our only option lol ;-) Cheers, Aaron.

Hi, do you have one for sale? I want one.

@DCT_Aaron_Engineering

6 жыл бұрын

Sorry this model has already been sold. Thanks for watching ;-)

@astonng7067

6 жыл бұрын

DCTTeacher1 do you mind if i ask how much it would cost to buy one like yours? I have been looking for one for years!

@DCT_Aaron_Engineering

6 жыл бұрын

Hey bud, it depends on what you have or available at the time. If you have a donor model you can buy a fueslarge from Vario (Germany) and insert your mechanic into it. I think this model sold for $4-6K aud. But don't qoute me on that, as it wasn't my helicopter. Cheers, Aaron

do you have contact information for Michael?

@DCT_Aaron_Engineering

8 жыл бұрын

BMBE TRINATIONALTRUST Hello, Michael is happy to hear from people. However, would you mind emailing your questions to me and I will pass it on to him immediately? You can get my email from the about section on my channel. Regards, Aaron.

@bmbetrinational

8 жыл бұрын

our question has not changed do you have contact information for Michael?

@DCT_Aaron_Engineering

8 жыл бұрын

+BMBE TRINATIONALTRUST Yes

Nice heli, but the your heckrotor is turning the wrong way.

@DCT_Aaron_Engineering

6 жыл бұрын

Thank you :-). Yes I know, most RC helicopters have the clockwise rotation. Some Vario models have the counter rotating rotors. Cheers, Aaron.

@Micheldiablocountach

6 жыл бұрын

I can not remember that there is a tail rotor that did not turn against the main rotor. Because that also stabilizes the tail rotor. Weird that your tail rotor turns the wrong way. But it's your heli. Regards.

@DCT_Aaron_Engineering

6 жыл бұрын

Not my helicopter. It's a club members. I would say the tail rotor was put on that side to make it look more scale realistic. However, it should be cutting up into the downwash. Funnily enough it still flies rather well ;-)

@Micheldiablocountach

6 жыл бұрын

OK. Then you must indeed make a choice, to place the heck rotor on the right side according to scale. Yes, despite the wrong direction of rotation. I think the heli also fly and steer well. Regards and thanks for your response.

How can I buy your helicopter ... how much is it worth? I'm from Colombia

@DCT_Aaron_Engineering

5 жыл бұрын

Hello Claudia. Very sorry this model was sold nearly 2 years ago.

@claudiamartinez2387

5 жыл бұрын

how much can a helicopter be worth ... and they do not sell anymore or ... because I really want to buy one

@claudiamartinez2387

5 жыл бұрын

Now you have to tell me it's worth 6 million dollars

@DCT_Aaron_Engineering

5 жыл бұрын

Hello, I think he sold this 2nd hand model for approximately $5000 Australian ($3.5K USD)

@DCT_Aaron_Engineering

5 жыл бұрын

LOL, no they're not that expensive :-)

blades are too thin

@DCT_Aaron_Engineering

5 жыл бұрын

Standard airfoil section for RC aircraft.

@delta7743

5 жыл бұрын

DCTTeacher1 if he made the fuselage himself he should damn right make the blades the right width

@DCT_Aaron_Engineering

5 жыл бұрын

Delta oh ok then. Didn’t know you were such an authority on such matters. We will get on to it immediately for you.

@delta7743

5 жыл бұрын

DCTTeacher1 yes maybe no but the thing that makes a huey so famous is it’s 2 massive blades half a meter wide, not a little bell 206’s blades

Hermoso helicoptero , yo estoy tratando de armar un Chinook con motor de motoguadaña , aca lo que es para aeromodelismo es carisimo e inalcanzable , por eso hay que buscarle la vuelta , podrias enviarme fotos de lo que seria la planta motris para sacar ideas para ela mio? Mi correo es ArielJun@hotmail.com Desde ya gracias y saludos desde Santa fe cap. , Argentina.

@DCT_Aaron_Engineering

4 жыл бұрын

Hello Ariel. I will see what photos I have and I will email them to you. Cheers, Aaron.

@arieljunco1182

4 жыл бұрын

@@DCT_Aaron_Engineering Hola , muchas gracias por responder , el motor que vos usaste en tu helicoptero es de una motoguadaña , no?Lo que mas me gusto es que yo venia pensando en hacer algo asi y veo y me encuentro con tu video , muy bueno!!!!

Should’ve been turbine

@DCT_Aaron_Engineering

4 жыл бұрын

Yes it would have been nice, but unfortunately not everyone can afford one.