Fully 3d printed 5ft long J10 cults3d.com/:1777499
Жүктеу.....
Пікірлер: 55
@oldman1944Ай бұрын
That was better than most of my controlled landings...
@Aerospace_Engineering_NoobАй бұрын
Reminder of Part 3 of the design smiggen lol just can't wait!
@hotlapkyle
Ай бұрын
Haha it’s funny, I keep forgetting because I have to tie up my iPad for an hour straight keeping the screen from turning off while the huge files upload. I’ll try it. This morning 👍🏻
@Aerospace_Engineering_Noob
Ай бұрын
@@hotlapkyle sweet! Thanks! Just got the Nx8 on order.
@stevec7596Ай бұрын
That's why I haven't used Deans in 20 years. As they age, they oxidize and resistance goes way up. They're also prone to just getting dirty. Don't use Deans. The plane looks good! It's very stable.
@MrMagoo321Ай бұрын
I started RC in the late 80s and I have never seen a plane lose power and RC control and land like better than you could have if you were actually trying to land it yourself! That was awesome plus that thing flies freaking great
@hotlapkyle
Ай бұрын
Haha thanks! I can say I pretty much nailed the CG!! 😂 and it’s got really nice flight characteristics if I don’t day so myself
@MrMagoo321
Ай бұрын
@@hotlapkyle yes indeed brother good job
@rjung_chАй бұрын
It landed so well for that it wasn't controlled. It works and flyes super nicely and for the hand launch maybe put those dimples in the bottom as you've done with other planes in the past? Cheers 👍💪✌
@airhammer6203Ай бұрын
Amazingly it didn't tumble after the power outage. It's really just bonkers how it managed to stay "upright" with a slight glide for a soft enough touchdown. A90 is just big, one bad toss and it's toast. I'd still go after some type of gear, even if it's not retracts. Great video, awesome that it flies well. AirHammer out!!
@franks.jr.7236Ай бұрын
That is one gentle giant
Ай бұрын
You were really lucky when you landed 🛬without any control......thumbs up👍👍
@jameslovell1887Ай бұрын
Make sure that the Canards are at least 1 or 2 degrees down. Neutral will fly but slight down angle on the canards will stabilize it like you won't believe and the CG will still be the same.
@ColinChickАй бұрын
That landing? The pilot survived without injury. Wow!
@hotlapkyle
Ай бұрын
Haha right
@shawnrinkel8377Ай бұрын
Dude I love your vids. Good planes and good vibes👍👍😊
@divyajnanaАй бұрын
super stable! great job!!!
@VT-FPVАй бұрын
"its not gon crash. i mean it crashed" kyle hahaha man what an insane build
@hotlapkyle
Ай бұрын
Haha!
@Lopez_rcАй бұрын
That would be cool with retracts!
@tommcallister5835Ай бұрын
Lucky break on the power loss situation. It looks like a fun plane. I need to print a couple parts for my J10 50 and give it another shot.
@coyoteman8073Ай бұрын
Definitely couldn't get much better landing with no control. Well done mate
@hotlapkyle
Ай бұрын
Perfect trim and CG! 😂
@angelofmusic477Ай бұрын
I have since switch from Dean to HXT 60 or 90. Dean goes high resistance over use. Lost my drone due to poor dean connectors.
@scottconnors7901Ай бұрын
Good build, and flight, glad it did the auto pilot, did fly well.
@jaredstaniland9117Ай бұрын
Just answered a question for me thank you.. . I bought a 90mm mirage second hand and the previous owner has used 10a house wiring between the EDF and the ESC. I was wondering if it would matter if those wires got a little hot 😅
@mach9908Ай бұрын
Great flyer! Did you just scale it up from the 64mm version?
@hotlapkyle
Ай бұрын
Yup!
@chikenfpv7798Ай бұрын
Thrust vectored version when?
@fpvliveАй бұрын
XT90 for the 90mm edf with 10-12 gauges wire for the win..
@FarmerFpvАй бұрын
You need to make a DIY PVC pipe bungee launcher for your EDFs. I built one for 30 dollars that breaks down and fits into a small duffel bag or even a grocery bag. Plenty of Videos on KZread or RC groups on how to make one step by step all from homedepot or Lowes parts. You can focus on the controls with both hands. Worth every penny as have never had a bad launch ever since. (Knock on wood, lol) But I do see you finally invested in an autopilot that works on prayer for brownout emergency landings. So crazy, lol.
@hotlapkyle
Ай бұрын
I’d like to try it!
@lewiemotorsports3616Ай бұрын
I think 80 and up would be good candidates for some landing gear just because of how awkward they are to hand launch but my god!! You must have been a quarterback cuz you THREW that mf good! She looks amazing in the air
@hotlapkyle
Ай бұрын
I was the QB in High school lol but anyone can throw this bird. She flew alway great
@lewiemotorsports3616
Ай бұрын
@@hotlapkyle I believe it. Biggest plane I’ve hand launched was my twin 50 su27 and that almost ended in disaster lol I’m still a noob though
@joaquingimenez6600Ай бұрын
Did you just up scale the files you have in cults3d? I would love to print it for a 90mm edf I have.
@hotlapkyle
Ай бұрын
Yes sir. Just scaled it
@toolbaggersАй бұрын
It practically landed itself.
@KillerplanesАй бұрын
Very nice- and very lucky! Where are you getting the printer files from?
@hotlapkyle
Ай бұрын
I designed all of them. 👍🏻
@kireolАй бұрын
Holy auto-pilot landing. That thing is a beast. Wow!
@adamtrzaskowski3901Ай бұрын
XT90 to Deans xD What could go wrong :D
@hotlapkyle
Ай бұрын
Haha 😂
@m14srvАй бұрын
Next project going to be a launching catapult
@robflyrcАй бұрын
I wonder, when you are sleeping? 😁 J10C loves high alfa. I have foam version.
@deckape714Ай бұрын
show the build Mister
@vrosi1963Ай бұрын
DAM lucky
@aidenkahn4338Ай бұрын
Wowwow shes pretty 😍🤩 new fav?
@3DPrintHangar_RCАй бұрын
DAAYYYUUUMMM BOIIII HE THICCCCC😂
@hinkepank1239Ай бұрын
Sorry for my question (German) : What is a dean ?
@tobZZZilla
Ай бұрын
Deans is an older type of plug and the only reason tonot forget about them is remembering to avoid them. The male ones are a dark red plastic piece with two metal prongst sticking out, one horizontal, one vertical, also known as "T connector".
@hotlapkyle
Ай бұрын
Yeah old style connectors that don’t take more than 80 amps very well. I was sending 130
Пікірлер: 55
That was better than most of my controlled landings...
Reminder of Part 3 of the design smiggen lol just can't wait!
@hotlapkyle
Ай бұрын
Haha it’s funny, I keep forgetting because I have to tie up my iPad for an hour straight keeping the screen from turning off while the huge files upload. I’ll try it. This morning 👍🏻
@Aerospace_Engineering_Noob
Ай бұрын
@@hotlapkyle sweet! Thanks! Just got the Nx8 on order.
That's why I haven't used Deans in 20 years. As they age, they oxidize and resistance goes way up. They're also prone to just getting dirty. Don't use Deans. The plane looks good! It's very stable.
I started RC in the late 80s and I have never seen a plane lose power and RC control and land like better than you could have if you were actually trying to land it yourself! That was awesome plus that thing flies freaking great
@hotlapkyle
Ай бұрын
Haha thanks! I can say I pretty much nailed the CG!! 😂 and it’s got really nice flight characteristics if I don’t day so myself
@MrMagoo321
Ай бұрын
@@hotlapkyle yes indeed brother good job
It landed so well for that it wasn't controlled. It works and flyes super nicely and for the hand launch maybe put those dimples in the bottom as you've done with other planes in the past? Cheers 👍💪✌
Amazingly it didn't tumble after the power outage. It's really just bonkers how it managed to stay "upright" with a slight glide for a soft enough touchdown. A90 is just big, one bad toss and it's toast. I'd still go after some type of gear, even if it's not retracts. Great video, awesome that it flies well. AirHammer out!!
That is one gentle giant
You were really lucky when you landed 🛬without any control......thumbs up👍👍
Make sure that the Canards are at least 1 or 2 degrees down. Neutral will fly but slight down angle on the canards will stabilize it like you won't believe and the CG will still be the same.
That landing? The pilot survived without injury. Wow!
@hotlapkyle
Ай бұрын
Haha right
Dude I love your vids. Good planes and good vibes👍👍😊
super stable! great job!!!
"its not gon crash. i mean it crashed" kyle hahaha man what an insane build
@hotlapkyle
Ай бұрын
Haha!
That would be cool with retracts!
Lucky break on the power loss situation. It looks like a fun plane. I need to print a couple parts for my J10 50 and give it another shot.
Definitely couldn't get much better landing with no control. Well done mate
@hotlapkyle
Ай бұрын
Perfect trim and CG! 😂
I have since switch from Dean to HXT 60 or 90. Dean goes high resistance over use. Lost my drone due to poor dean connectors.
Good build, and flight, glad it did the auto pilot, did fly well.
Just answered a question for me thank you.. . I bought a 90mm mirage second hand and the previous owner has used 10a house wiring between the EDF and the ESC. I was wondering if it would matter if those wires got a little hot 😅
Great flyer! Did you just scale it up from the 64mm version?
@hotlapkyle
Ай бұрын
Yup!
Thrust vectored version when?
XT90 for the 90mm edf with 10-12 gauges wire for the win..
You need to make a DIY PVC pipe bungee launcher for your EDFs. I built one for 30 dollars that breaks down and fits into a small duffel bag or even a grocery bag. Plenty of Videos on KZread or RC groups on how to make one step by step all from homedepot or Lowes parts. You can focus on the controls with both hands. Worth every penny as have never had a bad launch ever since. (Knock on wood, lol) But I do see you finally invested in an autopilot that works on prayer for brownout emergency landings. So crazy, lol.
@hotlapkyle
Ай бұрын
I’d like to try it!
I think 80 and up would be good candidates for some landing gear just because of how awkward they are to hand launch but my god!! You must have been a quarterback cuz you THREW that mf good! She looks amazing in the air
@hotlapkyle
Ай бұрын
I was the QB in High school lol but anyone can throw this bird. She flew alway great
@lewiemotorsports3616
Ай бұрын
@@hotlapkyle I believe it. Biggest plane I’ve hand launched was my twin 50 su27 and that almost ended in disaster lol I’m still a noob though
Did you just up scale the files you have in cults3d? I would love to print it for a 90mm edf I have.
@hotlapkyle
Ай бұрын
Yes sir. Just scaled it
It practically landed itself.
Very nice- and very lucky! Where are you getting the printer files from?
@hotlapkyle
Ай бұрын
I designed all of them. 👍🏻
Holy auto-pilot landing. That thing is a beast. Wow!
XT90 to Deans xD What could go wrong :D
@hotlapkyle
Ай бұрын
Haha 😂
Next project going to be a launching catapult
I wonder, when you are sleeping? 😁 J10C loves high alfa. I have foam version.
show the build Mister
DAM lucky
Wowwow shes pretty 😍🤩 new fav?
DAAYYYUUUMMM BOIIII HE THICCCCC😂
Sorry for my question (German) : What is a dean ?
@tobZZZilla
Ай бұрын
Deans is an older type of plug and the only reason tonot forget about them is remembering to avoid them. The male ones are a dark red plastic piece with two metal prongst sticking out, one horizontal, one vertical, also known as "T connector".
@hotlapkyle
Ай бұрын
Yeah old style connectors that don’t take more than 80 amps very well. I was sending 130
No more fiberglass. Use Carbon fiber!
lw pla?
@hotlapkyle
Ай бұрын
Yup