Thanks for taking the time to do this video guys

Super, Hyper MERCI Tu es gentil de présenter cet outil de cette façon simple et rapide en détail. Merci du Québec.

I brought one after watching this and referred back to understand it more, thanks.

@Alastair_Freebird

4 жыл бұрын

brendan ford you’re welcome 👍

Great tip about the angle bead magnet and the wood block

Great video. So many reviews don't go through the set up and actually using the levelers.

@Alastair_Freebird

2 жыл бұрын

Glad it was helpful!

Thank's for this one, very useful info !!

I brought one couple weeks ago, is 12 lines, comes with remote control, fantastic tool, for good value . All lines visible in sunny day.

@Alastair_Freebird

3 жыл бұрын

Do you mind posting a link to that particular model? The remote control could be very useful!

@kenkeneth4964

3 жыл бұрын

@@Alastair_Freebird I brought on ebay Huepar laser level 903DG remote control, green self levelling 12 lines.

This is a great tool

How is it holding up? Did you manage to check the accuracy? It is indeed very tempting to go for one of these cheaper ones, unless you are a bona fide pro builder that uses one on site every day

Target is widely used by suspended ceiling fixers , as it's magnetic it attaches the the grid 👍

@Alastair_Freebird

4 жыл бұрын

WT Design & Build that makes sense!

Nice work

Good idea with corner trims, great job. What pain did you use to finish that shelves?

@Alastair_Freebird

4 жыл бұрын

marppp28 we use Sayerlack AT99 waterbased paint from Movac. More details here: kzread.info/dash/bejne/g56Yq9GQYNWqY9I.html

I bought a heavy duty 6 foot Dewalt tripod for it. Seems to work great.

Its been my experience that the target is for suspended ceilings. You use it to level the metal grid. Attach your laser to the wall and use target to level it. My laser clamps to the track so no screws in the wall.

@Alastair_Freebird

4 жыл бұрын

Brian Needham makes sense!

@jesseroberts7020

3 жыл бұрын

That's exactly what it's for. The green target hangs off of the grid and your able to adjust its height perfectly level.

Are the vents at the bottom to allow ventilation into the media centre? Is there a build video on this built-in unit? A new subscriber to your channel.

@Alastair_Freebird

4 жыл бұрын

Stephen S yes ventilation inlet because it’s a fire (hot air heater) above. I did take some extra footage but I don’t think I ever made a full build video out of it!

Nice tip with the wooden block.

You can also use the target instead of your block

often the drywall corner bead will hold the magnets, I also use an ikea hanging bar or a camera tripod

@Alastair_Freebird

3 жыл бұрын

Thanks 👍

Target really helps when the you are in a bright space and\or at further distances.

@Alastair_Freebird

2 жыл бұрын

Thanks

Great video! I notice you cut the carpet. How do you fix the carpet to the floor after your cut? Do you install another tack strip and stretch it?

@Alastair_Freebird

4 жыл бұрын

Michael Ford yes we do reinstall the tac strip under the cut edge (cutting back the underlay accordingly). We kick the carpet into the spikes, it has always seemed to keep everything flat enough without a proper carpet Fitter’s stretching method!

@michaelford4894

4 жыл бұрын

Freebird Interiors thank you Alastair. I saw a video right after this where you show that you place the strip. Sorry about that.

Your last video was good, but this one is on another level!

@Alastair_Freebird

4 жыл бұрын

Black Tea One Sugar 😂

Hi mate You need Dewalt DWO882 mounting pole. Perfect for your set up needs. The mount thread is a standard size it’s about $120

@Alastair_Freebird

4 жыл бұрын

Billysplinter Billysplinter thanks 👍

@ecuadordave8076

3 жыл бұрын

I just unpacked mine. I saw a biz card inside offering a free tripod if I write a review!!! Cool....

@hectorsanchez2524

3 жыл бұрын

@@ecuadordave8076 on what? :o

Use a quick clamp to clamp a panel saw to a door and then the magnet with grip onto the panel saw. Not in contact with the floor and no fixings to tidy up afterwards.

@chippysteve4524

4 жыл бұрын

Good idea.Perhaps even better would be to clamp a steel rule to the door so you don't damage the door and can make your adjustments quickly and precisely IF you need to set the line at a particular height.

@Alastair_Freebird

4 жыл бұрын

Good ideas, best to avoid contact with floor so it doesn’t wobble

Do you have any of the DeWalt green lasers you could compare this against?

@Alastair_Freebird

4 жыл бұрын

Sam T I don’t, sorry!

Looks good but how often do you need to change batteries though ?

@Alastair_Freebird

4 жыл бұрын

Ben I’ve only had to change them once so far but that’s because I accidentally left it on in its case all night!! Apart from that they seem to last well enough but I don’t use it every day.

@BP-td5gv

4 жыл бұрын

Freebird Interiors ahh ok thanks for the reply!

@Alastair_Freebird

4 жыл бұрын

Ben o you’re welcome

Use the plasterboard screws on the corner points to mount the level 👌

@kylecroft5807

4 жыл бұрын

Posted midway through the video and I see you figured it out 👍

@Naughty_Squad

4 жыл бұрын

Exactly my thinking

How far can you see the laser outdoors in daylight? I recently bought a Bosch laser and returned it because you can literally not find the line beyond 3m distance in daylight.

@Alastair_Freebird

3 жыл бұрын

In daylight I think these would be no better. However this is why you can get a range extender, it’s a device that you hold up and it detects the line when on pulse setting and gives you a reference point.

@louishollandjr

3 жыл бұрын

What about laser glasses?

Hey guys! Nice video. I have a quick question. I think I saw also a dewalt laser that you have, if I'm not wrong, how good is the huepar compared to the dewalt? Thanks!

@Alastair_Freebird

4 жыл бұрын

I don't have the deWalt sorry! Possible you saw a yellow and black laser measure, not a level (a cheap stanley one)

Weld a base on the bottom of your metal to make it portable to put in any corner are stand up anywhere

7 months on would you still recommend this and do you use it on every job?

@Alastair_Freebird

4 жыл бұрын

Yes I would still recommend it just as much. Used it today. But it doesn't replace the spirit levels - sometimes I find them more suitable for the job in hand, but that's not because of any failings in this type of laser.

@samrix5793

4 жыл бұрын

@@Alastair_Freebird thanks for the great reply :)

@louishollandjr

3 жыл бұрын

@@Alastair_Freebird what's spirit level Ebay or another Store?

Hello I bought the model up from the one in the video and I also purchased this ( Laser Level Mounting Pole 3.6m with Tripod Base Floor to Ceiling Support & Bracket + Adapter 1/4 and 5/8 + Bag on Amazon) not cheap but not overly expensive either and they work flawlessly together take a look. Hope this helps. If you need a direct link let me know.

@Alastair_Freebird

4 жыл бұрын

john smith can you put direct link for simplicity, it should work as a hyperlink here

@johnsmith-hx9rs

4 жыл бұрын

Freebird Interiors Sure hope this helps. www.amazon.co.uk/Mounting-Ceiling-Support-Bracket-Adapter/dp/B07DRHZL55. As you’ll find out height is completely adjustable as the pole comes in several screw together parts, also you aren’t restricted to using the tripod element which can take up floor space, as the assembled pole has protective rubber feet on both ends so can be fitted floor to ceiling as long as the maximum height isn’t exceeded. It has a mounting table for your level that moves freely up and down the pole to the desired height which is then secured in place with a cam like lever, I’ve found this to be the weakest element of the design but could probably be improved with a little fettling.

@Alastair_Freebird

4 жыл бұрын

john smith thanks for this, seen it now. That look well built, I had t seen one like that. I’ll see how I get on with other methods of attaching the level on site but will keep it in mind and probably buy it eventually!

Buy a cheap plaster board support it can be fitted in doorway or floor to ceiling and being metal the magnets hold the level at any height

@Alastair_Freebird

4 жыл бұрын

As commented to Norman above - I’ve gone off any method that sits on the floor because walking around wobbles the level, hanging off the wall seems best if possible.

@MelbourneAlan

4 жыл бұрын

you will learn a few tricks as you use them more. i have tripods on wooden floors , they are too springy . i use on of those exandable poles that you jack up like a silicone gun but put it in a corner out of the way to minamise any flex in the floor hanging a hand saw from any picture hanging points works good too but it a bit limiting. last time i did that i brought a flexible steel roll up straight edge and hung that on a nail so i had 6 feet to play with height wise. clamping a hand saw to a window works well too sometimes , a clamp is great to clamp onto a window board overhang the magnet will hold on the bar of the f clamp

Could I use this to level some concrete spur posts I’m finding in my garden?

@Alastair_Freebird

4 жыл бұрын

Definitely. The laser travels pretty far, and for that sort of work the thickness of the line (thicker than some more expensive ones) might be a bonus

@AlabamaTree

4 жыл бұрын

Freebird Interiors thank for the reply. I’m not sure where the word finding came from in my original question... it was supposed to be ‘putting’

@Alastair_Freebird

4 жыл бұрын

The curse of the spellchecker, I got the general gist anyway!

how did I manage to take a line across 2 points, and the laser shows level in the center but the 2 ends across 25 feet shows that it is about 1/2" lower? Meaning my lazer is dead on with the string in center, but at the ends the string is higher, as if the string has a bow in it...but it is not touching anything. HELP?!

@Alastair_Freebird

3 жыл бұрын

Isn’t it normal that a long string would dip?

Hi How are you finding the laser level now is the level of good quality does it seem like its worth the money

@Alastair_Freebird

4 жыл бұрын

Hi Shane I would still recommend it just as much as before, I still find it very good. Some people have said the laser line is too fat; I don't honestly know how that compares to more expensive brands but for me it's never been a problem as you can just reference off the top or bottom of the line, and it definitely gives me more accuracy than traditional spirit levels. I don't know what you really benefit by paying more for other brands, this seems to do all I need and the build quality is solid, and the batteries are lasting ok

@keycomponentsshanesmith9042

4 жыл бұрын

@@Alastair_Freebird sounds like a new year purchase 👌

You can buy a telegraphic tripod used for photography lighting (pretty cheap) the thread will probably fit

How high do you make the alcove units

@Alastair_Freebird

4 жыл бұрын

niall01oneill typically 70cm. I think these were higher

thanks

Try using a plasterboard prop that’s what are use the magnet sticks to it great you can use the floor and the ceiling for the prop

@Alastair_Freebird

4 жыл бұрын

Norman Roberts I’ve gone off any method that sits on the floor because walking around wobbles the level, hanging off the wall seems best if possible.

how the magnet hold with the time of use?, if the magnet will no fall from the plastic and heat

@Alastair_Freebird

2 жыл бұрын

I have not had a problem with it

You fitted an IKEA kitchen? I am lost for words😂

@Alastair_Freebird

3 жыл бұрын

I don’t remember fitting an Ikea kitchen...

@bartman58

3 жыл бұрын

@@Alastair_Freebird just with you saying you had a wall bracket left off an IKEA kitchen 👍

@Alastair_Freebird

3 жыл бұрын

Oh yeah it’s still knocking about the van I think! Took it from a job site where someone else didn’t need it. I wouldn’t necessarily turn my nose up at fitting an Ikea kitchen though!

The target is more for longer distances or bright environments.

@Alastair_Freebird

4 жыл бұрын

Thanks

Buy a telescopic quick support rod with laser level mounting bar and you can use this anywhere.

Cheap amazon laser, festool cases under table. Something interesting there🤔

@Alastair_Freebird

3 жыл бұрын

What do you mean?

Hi did you get the link l sent you? It’s in the comments under my name

this huebar laser brand good??Any bodey good or bad exparience??

@Alastair_Freebird

Жыл бұрын

I trust the brand. They have better aftercare now. And recent models have better more durable buttons.

Did it get ceiling as well

@Alastair_Freebird

Жыл бұрын

It does show up clearly on the ceiling yes

what software do u use

@Alastair_Freebird

2 жыл бұрын

Sketchup

Magnet strong how are company able to make good levels for good prices.

@ecuadordave8076

3 жыл бұрын

I just unpacked mine. Just playing around and found the magnet doesnt hold it as I expected. its too top heavy to stay put. But if I slide the magnet to the outer edge it holds better. Possibly my house has more MUD!! However, they did offer a free tripod for filling out a review..

Hello how are you getting on with the laser now youve had it a while as some mixed reviews on amazon some say it eats up batteries

@Alastair_Freebird

4 жыл бұрын

Martin O using it today, no problems with it! Batteries last ok for me

@offcuts4146

4 жыл бұрын

Thanks for the quick reply i ordered one this morning got the 2 360 will let you know how i get on. Im on instagram offcuts woodworking and you will see some projects soo. Doing large reno on my house soon

@Alastair_Freebird

4 жыл бұрын

Found and followed you!

@offcuts4146

4 жыл бұрын

Cheers just accepted

How do about battery long lasting?

@Alastair_Freebird

2 жыл бұрын

It seems fine to me, but I don’t use it day in day out

I heard that one big retailer of these is binning them due to too many returns >The quality of the switches etc is poor

@Alastair_Freebird

2 жыл бұрын

Interesting. The latest model I bought has a better, rubbery switch

Mine was half inch off at SIX FEET

Cost 95€ on aliexpress

Use corner angle bead

Use a tripod?

@Alastair_Freebird

3 жыл бұрын

'Seyi Richard the problem with tripods is they limit the height you can quickly set it to. Based on advice I have recently bought a good quality floor to ceiling clamping strut which should allow me to mount it at any height

These are £129 on Amazon I think ???

@Alastair_Freebird

4 жыл бұрын

Nick we ordered originally on amazon but it never arrived

Should always level to either the bottom or top of the line, never the centre.

@Alastair_Freebird

2 жыл бұрын

Ok makes sense

I think i will spend the extra money for one that is rechargeable costs less over time

@Alastair_Freebird

4 жыл бұрын

Irvin Wittmeier I wonder though, how much time till you make the saving? Let’s say you give it regular usage and need to change batteries every month (I don’t know yet how long they last, perhaps that’s optimistic but how long do you really need to use it for?). You can get 4 AA batteries for £2. That’s £24 in a year. Equivalent branded lasers seem to be at least £100 extra so that’s 4 years til break even. Anyway, you could just buy rechargeable AA batteries (a bit more of a faff though).

@flyinlo1474

4 жыл бұрын

Or just buy a set of rechargeable batteries and switch all your AA devices to rechargeable.

I just got mine today. It sucks. Lots of ghosting and fantom lines. No it’s not dirty, and I bought it directly from the manufacturer.

@Alastair_Freebird

2 жыл бұрын

Ah shame I'mm sorry to hear that, its worth contacting them to ask for a replacement

@creative_vlad

2 жыл бұрын

@@Alastair_Freebird I did. They said it’s dirty. Funny thing happened, I turned it back on few days later and it’s been working fine ever since. Even in a dusty construction environment. Not really sure what was that.

@Alastair_Freebird

2 жыл бұрын

@@creative_vlad That's interesting. Perhaps a small speck in just the wrong place (like right on the laser source) can do it

Buy the fine adjustment accessory.

@Alastair_Freebird

2 жыл бұрын

Is that the sort of short tripod platform?

У коллеги такой же есть

Hi use the target instead of the wooden block

@chippysteve4524

4 жыл бұрын

Depending on the range of required datum points, e.g. floor and ceiling or just worktop height,I'd use a tape measure or a square-adjustable or roofing type- with a scrap of masking tape on it to avoid errors from misreading.By looking at the reading you get,you can easily tell whether your 'target' is plumb or not-tilt it back and forth until you get the maximum or minimum reading,which guarantees that your 'target' is square to the plane of the laser line. If you are going to use a block it has to be clearly labelled 'this way up' to avoid expensive mistakes.

Where do you live bud? Sounds like you have big rats in the background?

@Alastair_Freebird

4 жыл бұрын

justfly2525 sheffield, yes we are infested

@michaelgrant6920

3 жыл бұрын

@@Alastair_Freebird lmao... nice 1

Quero ver linhas no chão tirando esquadro

Ele tira esquadro no chão pra assentar piso no chão

Ok, I looked at a number of levels cheap and expensive and decided to stay away from one for the time being even though I'm a big gadget fan myself. The main reason being they're not as accurate as we may think - Skill Builder did an episode on it. Another reason is price. The one robust and accurate enough for my needs costs far too much just now. Finally, battery life is generally poor and Makita don't do an 18v version which is ridiculous. One minor disadvantage is quick and efficient mounting which none of the manufacturers seems to have come up with a real good solution for. Not so long ago all chop saw makes had laser versions which we all know now is just a waste of time. So, I really appreciate your review as I did sincerely consider this manufacturer myself. Have lots of fun with your new toy guys!

@Alastair_Freebird

4 жыл бұрын

aaa aa it will be interesting to see how we get on with it in the long run.

@Alastair_Freebird

4 жыл бұрын

Can you post a link to the skillbuilder video in question?

@ackec-umsekkruch-ekucki952

4 жыл бұрын

@@Alastair_Freebird here's the link to the SB video kzread.info/dash/bejne/qXuJj6-uotqsZKQ.html. Forgot to mention good quality levels have pendulum locks to keep them protected in transport. I believe it's just a mechanical lock like a pin or something but most levels don't have it. Yeah, go ahead and post us an update in a couple weeks time. That would be much appreciated! Laser levels tend to be out on the extremes of their visible ranges. It'd be interesting to know if this has implications in real life situations.

$$$

Get yourself a tripod mate

@Alastair_Freebird

2 жыл бұрын

Too limited. I got a Bessey floor to ceiling prop instead, works better for quick free positioning with the magnet bracket

I bought it , returned it and now they aren't meeting their commitment to credit me. Don't trust this company. Thought you should know what is behind your marketing .

@Alastair_Freebird

3 жыл бұрын

Sorry to hear this John. And to clarify, I am not marketing here, I bought this level and have had no contact with Huepar. I subsequently got sent models to review by different companies.

crap laser no argue on that.

@Alastair_Freebird

4 жыл бұрын

667mfleen it’s the first one of this sort that I’ve used. Seems good to me, can you tell me what’s better about the more expensive ones, is it the thickness of the line?

@Alastair_Freebird

4 жыл бұрын

ricardo rendon you mean is it bright enough? I haven’t really tried it for that, did turn it on outside once, it’s certainly brighter than other cheap ones I’ve seen but I expect you can get better

@perrinekld7451

4 жыл бұрын

You wanna spend your hard working money for DeFault or Milfuckee than right. I have a ton of 12v bosch tools in a systainer, there's a bosch laser that works with this 12v line, it would be perfect for me but fuck them, it's super pricey. Not to mention all the money I spend on fe$tool and maf€ll for the little usage. Some tool makers are making apple similar margin.

@technolog_touch

3 жыл бұрын

The heupar level laser use a OSRAM LASER LENS IT IS MADE IN GERMANY

Why make a video until you have it sorted out?Nobody wants to watch boys playing

@Alastair_Freebird

3 жыл бұрын

Randy Marshall it’s surprising how many people do! And for fellow newbies it gives them advance warning of the things they may need to figure out, without having to commit to purchase it themselves. Doing a dedicated review video is not something I always have time for so I just record as I do things. Something is better than nothing.

@Alastair_Freebird

3 жыл бұрын

You too