Here is a link to a T6 Torx bit driver that can be used. This is an Amazon Affililate link so I will make a commission if you purchase using this link - amzn.to/3M10GC0

WOW! A big thank you to Landshark Picker! I had cleaned all of the contacts that I could see but didn't know about the springs in the back of the board. Mine are pretty worn with 3/4 of a circle worn in from the springs. I cleaned them and turned the springs hoping for a different contact surface. Total pages printed on my printer is now, thanks to Landshark, 11,825. Thanks again. Scott

Thank You! I didn't even watch your whole video and still serviced & repaired my printer head before the 5:25 mark!

Thank you for giving the size of the torx bit. I watched several other videos and your the only one that thought to share that critical info. Your right, not everyone has them any smaller then t9. Luckily, I was able to find a key set that had a t6 in it at Harbor Freight. After cleaning the printhead, my printer works again. Thanks again.

@MACESTechnologiesLLC

3 жыл бұрын

Glad to hear. I wasn’t as lucky. I was lucky enough to sell the print head for $50 and the LCD for $30 on eBay though

NEVER, EVER scrub gold contacts with an eraser. It may fix the problem for a while, but then the gold plating is porous (or removed) and will corrode more rapidly. Only use alcohol and a soft lint free cloth or Deoxit Gold G5 contact cleaner. Based upon 35 years experience in the computer industry.

@tiffanyyachyshen4888

9 ай бұрын

Can we just buy a new printhead? And where?

@MACESTechnologiesLLC

9 ай бұрын

@tiffanyyachyshen4888 print heads are available on eBay. They are not real cheap tho. Typically min is about $50

@tiffanyyachyshen1906

9 ай бұрын

@@MACESTechnologiesLLC ok thank you

@stephenfurr8769

4 ай бұрын

@@MACESTechnologiesLLCwell, ink is over $100. So, I consider $50 for a repair cheap. :)

@stephenfurr8769

4 ай бұрын

I use mineral spirits to clean contact boards. Works for me.

so.... matthew mcconaughey... has taken on a side hobby... showing us how to fix our aggravating Office Jets... HP should hire this guy. He's a ringer...

@MACESTechnologiesLLC

2 жыл бұрын

Thanks for watching

@tacticalmedic

Жыл бұрын

Lmao that's what I thought also

@YooTooobJeff

Жыл бұрын

No, but Don Henley definitely

You're a lifesaver! I don't know anything about printers, so I didn't know you could just remove the thing with all the ink cartridges in it. I took this out and then put it back in and that fixed the problem for me. I had been printing business cards and half of a sheet got stuck. I got the printhead message after removing the business cards. Thanks!!!

@MACESTechnologiesLLC

7 ай бұрын

That’s great to hear. This works a great part of the time but not always. Other things can be the issue

This worked for me! I just needed to get the correct screw drivers. Once I got them, it only took five minutes to get my printer up and running again. Thank you!!

@MACESTechnologiesLLC

2 жыл бұрын

that is great to hear. glad i could help!

This worked great for me! I used an art gum (white) eraser, so there wasn't much debris, and it cleaned those contacts right up! What a relief when that message about the printhead being "unrecognized, not present, or not working" didn't come back after I restarted the computer! You saved me about $75.00 (probably more, since everybody is marking everything up now in the name of "inflation.") Thanks, Bro!

@MACESTechnologiesLLC

2 жыл бұрын

Glad that worked for you!

@bluev3nom

2 жыл бұрын

Katherine, as a kind gesture to people like him, I always try to give 15-20 percent of what I would of paid to those who spent the time and kindness helping people like us out. If you have a place for us to send some tip, please feel free to ADD. I am about to try this. I worked for HP for 10+ years. I know a lot of tricks and a lot of slimy things companies do.

@MACESTechnologiesLLC

2 жыл бұрын

Thank you for watching. Hopefully this works for some people. It’s not a guaranteed fix, but has worked

Lucky I had a small set of torx bits....but hey, other then having to chase down a micro sized spring! this works and I'm just amazed and thankful!!! Took me about an hour though.....mainly chasing that spring!

WOW! I didn't have to open the board just pulled the printhead out, turned it around and noticed the ink all over the connections... cleaned off, inserted back in and VIOLA! It worked! Thanks!!!!

@rogersavoie4570

3 ай бұрын

Wh is Viola? lol.

This was EXTREMELY helpful! I was about ready to toss out the whole printer. I am so glad that I watched this video. Now the printer works again!

@MACESTechnologiesLLC

2 жыл бұрын

Glad this was helpful! :)

Worked for me! Except... I used a little pipe cleaner thingy to clean as many contacts/areas as I could reach without having to unscrew the orinthead, since I didn't have the tools. I just got the areas/contacts on the inside perimeter, but those must have been it because it finally works. Thank you so much!

@MACESTechnologiesLLC

Жыл бұрын

that is a great alternate solution

Thank you so much. Worked on my first try (had to wait a day because I had to order the Torx bit from Amazon). Asked for paper and then calibrated the printhead.

@MACESTechnologiesLLC

5 ай бұрын

Glad it helped!

I did exactly as you instructed. It fixed the printer temporarily; The next morning I got the same error code that locked down all printer function. Had already ordered a new replacement printhead before I saw your video.... will arrive in a week. Luckily I have a backup printer. Thanks for the video

@babagandu

2 жыл бұрын

Any update ?

@NativeSD53

2 жыл бұрын

@@babagandu I could not get around the failed PrintHead. I tried cleaning all the contacts as showed in this video. Worked once but then went right back to error code and loss of all function. Ordered a new one (not reconditioned) and was up and running in a few days. The new Head did make me install all four "new" ink cartidges. Luckily I had replacements on the shelf; And I assume I can slip those back in once the "new" ones run out of ink.

@MACESTechnologiesLLC

2 жыл бұрын

Thank you. This isn’t a guaranteed solution but works for some. Thanks for watching

@longhaired1954

Жыл бұрын

Did your replacement printhead get your printer up and printing ? If so please share the brand of the replacement and where we could find 1. Thanks

Ok wait I think my printer is a different model but this could be what I need to do to get it working 👍 thanks for explaining it so thoroughly. 😘❤

Thanks for the information. Great video!

for cleaning the contacts on my canon camera lenses,i have been told more than once to use cotton headed swabs, and isopropyl alcohol, only as other things make wreak havooc on the coule of microns of coating on the contacts

Thank a lot. It did work. I just cleaned outside connectors only.

Great tip. So far so good. Thank you!

@MACESTechnologiesLLC

Жыл бұрын

great to hear it was helpful

Cleaning the contacts on the back of the board on my HP 8720 did the trick! Good thing I found a fresh golf pencil erasure in the bag! Thank!!!!

@MACESTechnologiesLLC

Жыл бұрын

Good to hear it helped.

So I have the 8620 with the same problem. No matter what I did I'd get the same error "not detected or faulty print head" This happened when I bought and installed brand new OEM color and black cartridges from HP! After doing a little research I unplugged the printer for ten minutes as recommended. This was suppose to clear the memory data of the ink cartridges. It didn't work. My printer is on my network so I found the printers I.P. address under Setup/Network Setup/Wireless settings/View Wireless Details. I then put the I.P. address into the browser on my computer. On that page click Settings/Preferences/Anonymous Usage Information Storage SET IT TO OFF ! ! ! I believe that solved the problem. The printer was evidently using online information from HP that would cause the Print Head/Cartridge error..... While you are on that page also turn off Preference/HP Cartridge Protection..... Additionally I believe to clear the Print Head or Cartridge data the line cord should be unplugged for hours. Not ten minutes. Hope this helps. Pass the info along.

@MACESTechnologiesLLC

Жыл бұрын

:(. This is not a guaranteed fix. This happened to fix mine and others.

bro, thank you so much for your explanation this resolved my issue right away. I believe my issue was the actual ink head it was full of ink I wiped a few times like you did in the video and it worked.

@MACESTechnologiesLLC

2 жыл бұрын

Glad this helped

Great tutorial. I initially was trying to clean the ink system. Now I am getting the not detected error. I ordered a replacement off ebay and a cleaning kit for this model. Is there a way to determine for sure if the printhead is dead or just needs more cleaning? I am also wondering if I could have damaged the connector between the main board and little board with the large springs?

Thank you! Worked for me.

This worked for me! One of the springs jumped out onto the floor when I took the board off. After a few minutes of crawling around to find it, everything went back in and now it prints great again.

@MACESTechnologiesLLC

5 ай бұрын

Good to hear. I think I may have had the same issue with the spring

@CoderJK

5 ай бұрын

It was definitely in there under pressure! One moment there were 6 little springs and then I blink and there were 5... 🤪@@MACESTechnologiesLLC

Had same message and found one of the colour cartridges ink had dried up and was empty. After replacement fixed problem but would also suggest you clean the printer head by pulling out the unit after removing the cartridges and just use paper towel and hot water. Printer works like new.

Thanks again for showing the video.

@MACESTechnologiesLLC

2 жыл бұрын

Hope this was helpful

Thx for the advice, I was able to revive my HP OfficeJet 8730 😀

@MACESTechnologiesLLC

8 ай бұрын

Good to hear!

many thanks sir!! she's laying down ink properly again!!

@MACESTechnologiesLLC

7 ай бұрын

That’s great to hear. This doesn’t fix 100% of the time but have seen a positive response like this before! Glad this was helpful.

This worked for me! Thanks SO much for your great video!!!

@MACESTechnologiesLLC

Ай бұрын

Glad this worked for you

These are great instructions, and I had such hope when it asked me to insert a piece of paper and was aligning the printer. But after rebooting it, and trying to print, the same error message came up. Couldn't even get to utility to clean the printheads. But thanks for this. Really helpful, just wish it worked for my printer.

@taxaviebro6411

2 жыл бұрын

Same

If you browse to the printers own website on your home network using it's ip address in a Web browser. It can give you a hint what the issue it. Mine was the magenta ink cartridge.

thanks for the video. If this still doesnt fix the problem, then what is the alternative ?

Yes sir, it worked for me! Thank You.

@MACESTechnologiesLLC

2 жыл бұрын

Glad it helped

It worked thank you. You saved me money wow

@MACESTechnologiesLLC

2 жыл бұрын

Good to hear!

best video. thanks !

That was really useful, thank you. At my HP officejet 4622 has been that problem long time, and finally I fix it . I had to take aport but everything working 👍

@MACESTechnologiesLLC

3 ай бұрын

Good to hear !

Thank you!! This worked!!!! So happy❤🎉

@MACESTechnologiesLLC

8 ай бұрын

So glad!

Thank you sir. I did everything you said in the video but it did not fix my issue. Thank you anyway

Thank you very much! At least in my case it worked great. My HP OfficeJet Pro 8620 is printing again.

@MACESTechnologiesLLC

2 жыл бұрын

Great to hear!

Hi quick question. It's possible to convert this printer in DTF printer.?? Thank you

Thank you brother trying this know with my printer

@MACESTechnologiesLLC

2 жыл бұрын

Did it work?

For my HP Photosmart 7525. I didn't even need to clean. I just tried taking the print heads out, but it wouldn't come out. So I just closed everything and it worked.

Thanks for this. I just reseated the printhead - something I learned from this video - and ended up not having to even clean it.

@MACESTechnologiesLLC

10 ай бұрын

Good to hear. Glad I could be of assistance

@sarahmae8539

9 ай бұрын

How did you reset it?

@MACESTechnologiesLLC

9 ай бұрын

@sarahmae8539 what are you trying to do?

@sarahmae8539

9 ай бұрын

@@MACESTechnologiesLLC I’m trying to figure out how to fix my printer. It’s throwing a 0xc19a0040 error code

@MACESTechnologiesLLC

9 ай бұрын

@sarahmae8539 is that on the computer?

Gonna Try THIS Procedure on an 8610 tomorrow... Thx LandShark !

@MACESTechnologiesLLC

Жыл бұрын

Hope all goes well. Not a guaranteed fix but know to work in some situations

He is alive, long time no see Craig.

@MACESTechnologiesLLC

2 жыл бұрын

Thanks for watching Eric

Took two tries, but it worked! Thanks!

@MACESTechnologiesLLC

Жыл бұрын

Great! Glad I could help

@woodyou257

Жыл бұрын

Unfortunately after one print job it came back up with the error. Back to the drawing board!

@MACESTechnologiesLLC

Жыл бұрын

@@woodyou257 sorry. This is not a guaranteed fix but will help some.

Thank you. it worked

@MACESTechnologiesLLC

2 жыл бұрын

Glad my video helped you resolve your issue!

I gave up trying to get it to work, I bought an Epson ET-2850 printer. The printer served it purpose but I will never buy another HP printer unless it is a Tank Printer and a real good price.

Thank you so much Matthew McConaughey

@MACESTechnologiesLLC

Жыл бұрын

Lol. Glad this could help and I guess provided a little entertainment value

Thank you! I had high hopes and it did not work for me.

Thanks!

@MACESTechnologiesLLC

2 жыл бұрын

You bet! Thank you for the $

I have two HP 8610 printers. I had one show up with the missing or not detected printhead. I've used it a LOT and could understand if a part was worn out. However, the second is a bit newer and not used as much. It was my son's from his time in college. When he moved out he didn't need it so left it for us to use. I plugged it in to have a working printer and a couple of months later it has the same issue. I'm wondering if this is a fault from an upgrade? I cleaned the printhead and did some reset I found. It worked for a few prints and then failed again. I even bought a new printhead and tried it but it would not detect on either printer. Somethings not right here. :-( I keep forgetting to call HP to grill them about a possible issue with an update.

Yes, T6 is the right size!

@MACESTechnologiesLLC

3 жыл бұрын

Thanks for watching. Hopefully this video helped

So when I opened it up I realized one of those tiny springs was snapped, any idea what spring I should buy to replace it?

@MACESTechnologiesLLC

2 жыл бұрын

I am not sure. I have not had to replace one yet.

worked thanks 100!!!!

@MACESTechnologiesLLC

Жыл бұрын

Great to hear

Very helpful video, but unfortunately when I was able to inspect the contacts on my print head I found the springs had worn through some of the contacts to the PCB itself.

@MACESTechnologiesLLC

Жыл бұрын

Sorry to hear that. U may be able to get just the pcb on eBay. I know the printer heads sell for around $50

We have an HP Officejet Pro 7740. The yellow catridge prints black. We've tried this with an HP and HP compatible cartridges to no avail. We have now used the head cleaner and ran it twice. Problem remains. Do we need to be a new prinhead?

@MACESTechnologiesLLC

2 жыл бұрын

Possibly. This is not a guaranteed fix for every printer. The board can go bad as well. You may need to replace the print head. They are about $50 used on ebay

Nice video... didn't work for me but I'm assuming HP has sunk my attempts to circumvent their consumables profit. One suggestion, flipping the springs may help if they've corroded on the other side (the one you can't see). By flipping them you eliminate that possibility. Just a thought. Would love a link to some kick booty contact cleaner.. just saying. :) Again, great job on the video. Cheers.

@MACESTechnologiesLLC

2 жыл бұрын

Thank you. This isn’t a guaranteed solution but works for some. Thanks for watching

So, question. I have a 8720. I've bought a new printhead, new ink cartidges and no, not HP ones...I've went through all the cleaning techniques. I found pressing once above the question mark, once below and then twice above brings up a factory menu. I've reset it...which then messes up because of the print head error. I really hate to junk a printer that has had minimal use as it's a home printer...but in the end is this actually fixable?

@MACESTechnologiesLLC

2 жыл бұрын

it is a case by base basis.

@jonathangreene4309

2 жыл бұрын

@@MACESTechnologiesLLC apparently. I know it's a HP scam to get ppl to buy new products. I have messed with the printhead trying different suggestions and it will give a different message like it's going to work...and then go back to the error. All HP support says is buy a new printer. I just set it to MFG mode to make the print error disappear so I'll use it for everything but printing...and bought an Epson printer. Those last way longer than HP anyways.

Haha it worked thank you!!

@MACESTechnologiesLLC

2 жыл бұрын

That’s good to hear! Glad I could help you!

Too bad the last owner didn't keep the OUTSIDE of the printer clean, too. It's also wise to keep a dust cover on the unit, when not is use.

@MACESTechnologiesLLC

2 жыл бұрын

definitely.

Great video - tanks - where for u get the torx set and what exactly do u call it?

@MACESTechnologiesLLC

Жыл бұрын

I just pinned comment with AmaZon link

I build circuit boards, you can use alcohol to clean the contacts.

Do you have a link for the $50 Printhead? I can't find that price anywhere

@MACESTechnologiesLLC

Жыл бұрын

Which model printer do you have?

Thank you for the detail video n instructions but my printer still doesn’t detect printhead

@MACESTechnologiesLLC

Жыл бұрын

This is not a guaranteed solution. I has worked for a lot of people. You may have another issue that is causing it to not be detected

I have the 6700 Premium model. Will this video work for mine?

@MACESTechnologiesLLC

11 ай бұрын

I think it is definitely worth a try. Majority of this style printer has a carriage that holds the print head.

I did the whole process and changed the inks and it didn't work out. Help!

@MACESTechnologiesLLC

2 жыл бұрын

Thank you. This isn’t a guaranteed solution but works for some. Thanks for watching

8740 just started doing this. It’s definitely not a hardware issue…

Thanks. Great video. I follow your instructions and the "Printhead Missing" message went away. It then asked for me to "load paper and realign printer". It ran through that process but it won't print. The paper just passes through and no ink drops. Not sure what to do now, but replace.

@user-pm6lf4oz1l

2 жыл бұрын

Easy. Your printhead is clogged (very common) also easy fix. Look into "Clean printhead liquid" I did it at home easily.

@joerapolla9040

2 жыл бұрын

@@user-pm6lf4oz1l Thank you! I will try.

@user-pm6lf4oz1l

2 жыл бұрын

@@joerapolla9040 no worries, I had all the tubing and syringe lying around at home. The liquid you can also make yourself using warm water, isopropyl alcohol and some windex. It's what I did. (Wear gloves, it gets messy)

I tried this and it didn't work. I bought a new print head and it still says print head is missing. Is there something else I can try to do?

@MACESTechnologiesLLC

7 ай бұрын

Sorry to hear that. Could be the contacts where the print head is seated. Also I think there are some leads behind it as well.

Does not come out the same for a 6600 series, which looks about the same as your printer. No gray bar to lift up.

What size screw driver do I need

@MACESTechnologiesLLC

Жыл бұрын

There is a link in the description

I had a problem with my printer which printed blank paper. I replaced the print head. It’s working fine

@MACESTechnologiesLLC

2 жыл бұрын

That’s good to hear

Print head will not move to the left...help please...HP 8610 Thanks

@MACESTechnologiesLLC

2 жыл бұрын

so when you open the front of the printer the print head does not move?

@luvpoems4u

2 жыл бұрын

@@MACESTechnologiesLLC I gave up on it, and tossed it...life goes on thanks!

how do you put the paper in

@MACESTechnologiesLLC

Жыл бұрын

What do you mean? There is a paper tray

I have tried all the tips and suggestions and still can not get mine to print, printer head is still not detected. I don't want to buy a new printer but it is a 140 dollars for a new head and ink, new printer is 150. Has anyone figured out the real cause and fix for this?

@MACESTechnologiesLLC

Ай бұрын

This is just one possible fix. If you read other comments this has solved the issue on multiple occasions.

@keithjohnson5190

Ай бұрын

@@MACESTechnologiesLLC Yes, you are right, it has helped others, it was worth a try. Thanks for helping others.

Hi Dear， can you give a detail model of your screw driver? Many thanks!

@MACESTechnologiesLLC

2 жыл бұрын

I am not sure if the exact model but I mentioned in the video what size it needed to be

@marinetao9147

2 жыл бұрын

@@MACESTechnologiesLLC Thank you. I heard it’s a T6. But not sure the head is flat, star or something else.

@totallycrayz

2 жыл бұрын

@@marinetao9147 it's the star looking one

whats the size and type of the screwdriver used ?

@MACESTechnologiesLLC

2 жыл бұрын

I mentioned it in the video

@tirtdutta2674

2 жыл бұрын

@@MACESTechnologiesLLC Thx..I was looking for that exact pack of screwdrivers ..do u have an amazon link ?

At the moment of typing this I'm not sure yet about the solution. But just letting people know I was able to get the screws off with some needle nose pliers.

I tried this on my 8600. It did not work. I then ordered a new print head, and it did not resolve the problem. I then took the printer apart, found a component on the main board had a burned hole in the center of the component. Did a lot of research and found the part description and number. It was one of the print head interface chips. Purchased a new part from a discrete component reseller from overseas, installed the part, I do not recommend doing this unless you have the training and equipment to replace surface mount components, reassembled the printer, and it worked with the old and new print head. Again, this is not a normal repair that just anyone can perform. I have years of experience repairing equipment with surface mount components including VLA, only because I have the equipment to do it with. The cost of the component was not that much, but the labor time made it cheaper to purchase a new printer.

@leontaewilliams2253

3 ай бұрын

Where do you recommend I take my printer to also try to do what you did? I believe I could be have very similar issue with my HP 8600

@MACESTechnologiesLLC

3 ай бұрын

Any computer repair shop.

ok i subscribe your channel

Got a office jet doing this ill let you know if it works if not you owe us an Allright Allright Allright!

@MACESTechnologiesLLC

Жыл бұрын

Good luck. It has fixed a lot but it’s not 100%.

@BossEagle74

Жыл бұрын

You owe us an Allright Allright Allright

I think thats what an 8600 of 8610 or 8620 is worth when its giving this message and useless is about $10 dollars.But unfortunately I didn't know all that and gave $50. I've learned a few things of what to try and what not to. I tried a reset to see if it would make the missing print head go away. I think with the partial reset I could get into the rest of the icons if i wanted to scan or something, But i still couldn't print as it would give the same message. I think I did the full reset and that halted everything as the menu could not be brought up any more. couldn't go past the message. The thing is that was even worse. If I wanted to pull the printhead. I couldn't now, because the the head wouldn't move over to the left when opening the print door. So here I was Locked on that message missing print head. nothing else in the menu would come up & the carriage wouldn't move left to work on it. So I pulled the wrong end panel off as I thought the green pcb board was on the right hand side like the 8500. they switched sides. So I pulled the end panel off the (left hand side) . I was looking for leverage to turn that shaft, that goes all the way across. And on the (printed circuit board) end I found it. There 's a white plastic gear on it. But it was to hard to reach, so I put a vice grip on the end of the shaft ( sticks out plenty far enough). One direction it wouldn't really turn, "hardley at all", (DON'T FORCE IT) but the other direction it did. So I turned it ( not knowing what I'm doing) and turned it some more . I was trying to see if the carriage would move. I didn't see anything. So I took the vice grip off. But!!!!!! When I reached my hand in there like, I did, several other times before. to tug on it a little, to see if it would come away from the far right. ONLY THIS TIME IT DID! So now it's back to the LHS where I can, "get it out of there", and try this method with either alchol and cue tip. or the eraser. And now with the head over Finally. I could also order a ebay new head, If I decide too.

If this makes my dumpster printer work, I owe you a beer

@MACESTechnologiesLLC

2 жыл бұрын

Hopefully this helped

The one tool I don’t have!! Damn!! Lol

opened mine up and only 3 springs are here..wtf

@bluev3nom

Жыл бұрын

nevermind... found them. My cats took them and were playing with them in the kitchen..

Do these printers have Bluetooth?

@MACESTechnologiesLLC

Жыл бұрын

I do not believe that this model supports Bluetooth

Your error still did not clear...?

@MACESTechnologiesLLC

2 жыл бұрын

this is not a guaranteed solution but an option to try.

7:02 HP instructions say "gently" push

Sometimes I use WD 40 to clean the contacts

@MACESTechnologiesLLC

2 жыл бұрын

That’s a great idea

Bro, I have the 6700….there is no lever

@MACESTechnologiesLLC

2 жыл бұрын

I think I have one of those as well it’s much harder to remove snd replace

Does this guy not sound somewhat like Matthew McConaughey?!?! LOL! Gotta be from Texas.

@MACESTechnologiesLLC

2 жыл бұрын

i have heard people say this before...:). i am not from texas...but am from the south.

this should be a class action lawsuit against HP. absolutely ridiculous!!

I dont hear you!!!

It didn't solve my problem 😔😩

@MACESTechnologiesLLC

2 жыл бұрын

Thank you. This isn’t a guaranteed solution but works for some. Thanks for watching

@taxaviebro6411

2 жыл бұрын

Try updating the firmware, it worked for me

Awesome video! Jesus Christ loves you brother!

Low, non-recognizable sound.

@MACESTechnologiesLLC

2 жыл бұрын

? Your getting a low non recognizable sound from your printer?

That didnt work. Nedd a new printer

@MACESTechnologiesLLC

Жыл бұрын

Sorry to hear that. This fix does not fix all print heads.