HP 15 BS BR Series broken Display frame led hinges replacement applies to any laptop DIY

Ғылым және технология

Have you purchased a very slim laptop in the past 3-4 years ? Are the hinges very tight ? Can u see the base protuding at the ends ? have the screws fallen off near the hinges area ? Has the display frame got broken ? Has the laptop fallen and base has got broken ?
Then this video is specially for you ! Do not miss to watch the video till the end. We have taken case study of HP 15 BS Series of laptops to explain what exactly happens with your laptop hinges and why your frame comes off ! We have intricatly shown how to clean hinges and make them loose. After watching this video you will be able to avoid a situation where you will have to pay 4-7K to get the parts replaced ! The science behind hinges is explained.

Пікірлер: 107

  • @hanamantjadhav2058
    @hanamantjadhav20582 жыл бұрын

    A very professional video. Creator has not commented on the make or quality of the product - which he could have done easily. Instead he has suggested the ways to overcome the problem.👍

  • @-Dash-
    @-Dash-2 жыл бұрын

    Thanks for showing this, it gave me good idea of what I would find when I took my laptop apart. I found broken female screw inserts on both the top and bottom covers, fixed them all with strong super glue all around, loosened the hinges a little bit and rebuilt it. Now its like new again.

  • @shauna-kaygreen6861
    @shauna-kaygreen68612 жыл бұрын

    Very detailed video. I just wanted to understand the complexity of repairing the hinges. I will take my computer to a professional though. Thanks a lot.

  • @anshulmehta1603
    @anshulmehta16032 жыл бұрын

    your video is best on youtube among others. Clear directions

  • @rajeevdeka1413
    @rajeevdeka14133 жыл бұрын

    ur doing a great work sir great detailed explanation

  • @Musafir575
    @Musafir5753 жыл бұрын

    Thank you so much you are doing a great work that too with Honesty. You are my inspiration.

  • @lifeconversationswithaunti3317
    @lifeconversationswithaunti33172 жыл бұрын

    Very thorough. Thank you.

  • @user-pd3xy7gk3k
    @user-pd3xy7gk3k2 жыл бұрын

    Very nice and detailed tutorial! I am going to fix this same model in a similar fashion. Most of the nuts have been stripped away from the back cover, but instead of buying a new back cover, I will try to re install them with some qbond. Unfortunately the hinges are broken so I had to get new ones. And the hinge covers too.

  • @TechstoreCoIn

    @TechstoreCoIn

    2 жыл бұрын

    Thanks for the subscribe & your kind words.

  • @GaryFab
    @GaryFab3 жыл бұрын

    The best video step by step procedure. Yes the best!

  • @TechstoreCoIn

    @TechstoreCoIn

    3 жыл бұрын

    Thanks for your appreciation. Do subscribe

  • @Pablo_Sito
    @Pablo_Sito2 жыл бұрын

    Fantastic job! 💯% perfect 👌 Very professional and clean video, in English too! 😳😁🤭 Thanks my friend 👍 👍

  • @piyushkumar2700
    @piyushkumar27002 жыл бұрын

    The only video that doesn't confuse ypu midway.

  • @pranshukashyap7325
    @pranshukashyap7325 Жыл бұрын

    Thanks for the video, was very helpful

  • @TechstoreCoIn

    @TechstoreCoIn

    Жыл бұрын

    Please do subscribe.

  • @amit_singh0509
    @amit_singh05094 ай бұрын

    Thanku so much bhiya Maine khud se he thik kar lia.. love you ❤❤🙏🙏🙏

  • @TechstoreCoIn

    @TechstoreCoIn

    4 ай бұрын

    Love you too brother. Do Subscribe.

  • @LearnWithNeeraj777
    @LearnWithNeeraj7772 жыл бұрын

    Very professional ❤️

  • @Sanjay-ik5um
    @Sanjay-ik5um2 ай бұрын

    So helpful❤

  • @ginesrodriguez8570
    @ginesrodriguez85702 жыл бұрын

    Really enjoyed your video!! It was exactly what I needed (this one and the one on how to open the hp notebook) unfortunately I did not find your video before I opened up my notebook! I did not know there were screws under the rubber bumper pieces and consequently I broke some things. I believe you mention that those pieces that broke off that were attached to the hinges could be replaced. Where would I find them? Again, I loved your video and subscribed for future ! thanks so much

  • @vkdem
    @vkdem3 жыл бұрын

    Thank you friend. Good video.

  • @TechstoreCoIn

    @TechstoreCoIn

    3 жыл бұрын

    Thanks. Do Susbcribe.

  • @user-rn2rn3ut1c
    @user-rn2rn3ut1c3 жыл бұрын

    Thank a lot Ifix my laptop panel and hinges at home under your video instruction. Thanks u sir .

  • @TechstoreCoIn

    @TechstoreCoIn

    3 жыл бұрын

    Glad it helped Do Sucbribe.

  • @javedsaiyyad1207
    @javedsaiyyad12072 жыл бұрын

    Thanks sir .. very thankful vedio...🙏

  • @nagabooshnambs5233
    @nagabooshnambs52332 жыл бұрын

    Excellent

  • @5t66t5
    @5t66t53 жыл бұрын

    Excellent video. Excellent mustache.

  • @prashantdeore9233
    @prashantdeore92332 жыл бұрын

    Thank you Sir.

  • @TechstoreCoIn

    @TechstoreCoIn

    2 жыл бұрын

    Pls subscribe.

  • @russelgarcia9490
    @russelgarcia94902 жыл бұрын

    THIS CHANNEL NEEDS A LOT OF SUBSCRIBERS! THANKS A LOT NOW I CAN REPAIR MY LAPTOP ON MY OWN AND BUY THE PARTS.

  • @TechstoreCoIn

    @TechstoreCoIn

    2 жыл бұрын

    Hello us spread the word in your groups and please subscribe

  • @jairotechsupport
    @jairotechsupport2 жыл бұрын

    Thank you Anand Baid. I have learned that I have at least two stripped female screws, the plastic to the bottom frame where the female goes has broken off, so that the hinge may not stay secure to the bottom side, the non-display side. So perhaps I should look for a video, if there's one out there which shows how to fix or come up with something to keep the hinge secured to the bottom plastic bed where the motherboard and the fan goes.

  • @jairotechsupport

    @jairotechsupport

    Жыл бұрын

    I'm back to report how it's going so far. I have figured out a way to put back the metal rings that got ripped off the plastic case. I am simply using a soldering iron and melting plastic to form a mound and then I sink the screw hole with a screw in place so that it is held down after the plastic cools down and then I sand it down around the edges. But as you can imagine, it's taking lots of incredible patience and trial and error. I almost got it. The hinges are in place. I lost a few screws along the way. I ordered a set on Amazon. I also lost the power connector. So I got to order that on eBay.

  • @TechstoreCoIn

    @TechstoreCoIn

    Жыл бұрын

    you could have used Araldite solution for this

  • @syed9640
    @syed964011 ай бұрын

    Thank you for video .....spcly For Zoom in Pic showing clearly

  • @radium1120
    @radium1120 Жыл бұрын

    Bro I am replacing my HP omen screen from hp service centre . Will the new screen be exactly same as the original one? Will there be any difference in picture quality of the screen?

  • @ghassanibrahim9008
    @ghassanibrahim90082 жыл бұрын

    Any related video about HP Envy 15 Notebook PC? same issue

  • @rsansare
    @rsansare2 жыл бұрын

    where can i buy display screen for hp 15 bs series laptop, is there any online portal for such display hardware

  • @wadetewehiapiti900
    @wadetewehiapiti9002 жыл бұрын

    That looks easy but then l think it takes a few watches to see how you do it before sitting down to do it. one side of my laptop is broken so l bought from Amazon the correct hinges so l forgot to include screws. Do I have to buy anything else that l may have left out to buy Thanksthoroughly enjoyed watching you do it step by step, and yes very detailed tutorial? So when l am game to have a go at fixing my hp laptop l will do another comment when finished. l see you replaced the back cover and replaced it ratherr then buying another cover can l use a bonding instead

  • @MDisHere_YT
    @MDisHere_YT Жыл бұрын

    Sir i have this same laptop and the same left side hinge and panel got broken now, i was looking for spare parts of it but cannot find anywhere can you please tell us where we can get those parts

  • @subodhsz
    @subodhsz Жыл бұрын

    good

  • @varshaithakshi1606
    @varshaithakshi16062 жыл бұрын

    Very nice & informative video. But I am scared / not good at doing this. Any idea how much will it cost to get it done at a store? Also, should we get it done at HP showroom or any other service centre is fine.

  • @balavijai9159
    @balavijai91592 жыл бұрын

    My laptop hp Compaq prisoro v 3000 broken hinge and front and back cover panel how to change not available i check this model any modifications for another laptop same model suitable bro any ideas bro

  • @shogu1478
    @shogu1478 Жыл бұрын

    Where can i buy this back cover. Can you give a link

  • @bhushansahu1677
    @bhushansahu16777 ай бұрын

    I can use 360. Hinges for the same laptop ✨✨

  • @krishay3519
    @krishay35193 жыл бұрын

    Bro I have the exact same problem with my laptop. The screws got ripped off and the hinge is bent. i think its a common problem among hp laptops. do u have any idea where to get the hinges online? All service centres in my area are either closed or dont have the parts

  • @TechstoreCoIn

    @TechstoreCoIn

    3 жыл бұрын

    Write a mail to sales@techstore.co.in

  • @maluskitchen5933
    @maluskitchen59333 жыл бұрын

    Sir, How much cost for this work?

  • @David-fj5lz
    @David-fj5lz Жыл бұрын

    My laptop is d051sa and 3:34 both hinges are broken off the side of the screen,bottom base is also smashed

  • @rsr7102
    @rsr7102 Жыл бұрын

    What happen my laptop one side of lid was evenly closed.,

  • @yashbhurle8822
    @yashbhurle88223 жыл бұрын

    I have the same problem even the screw of the bottom got damaged. Will you please tell me from where i can order the required parts like panel and outer body.

  • @TechstoreCoIn

    @TechstoreCoIn

    3 жыл бұрын

    You can mail to sales@techstore.co.in Thanks Do Subscribe.

  • @manveetmann7380

    @manveetmann7380

    3 жыл бұрын

    @@TechstoreCoIn sir didn’t find it there. What will be the cost

  • @PT4LifeYO
    @PT4LifeYO3 жыл бұрын

    Excellent video, such a poor design laptop! I think i will drill/nuts/bolts/washers in one hole each side if possible even if looks bad. Thanks

  • @TechstoreCoIn

    @TechstoreCoIn

    3 жыл бұрын

    Hehe..!

  • @devadarshini05
    @devadarshini052 жыл бұрын

    Hello sir, same problem here as well. Can u suggest an authorised repair shop in Delhi

  • @TechstoreCoIn

    @TechstoreCoIn

    2 жыл бұрын

    Please do subscribe. We will reply.

  • @sindhuja9690
    @sindhuja96903 жыл бұрын

    Same problem. How much it may cost sir?

  • @TechstoreCoIn

    @TechstoreCoIn

    3 жыл бұрын

    4000

  • @raghu802
    @raghu8023 жыл бұрын

    Is it necessary to change the screen in this case?

  • @TechstoreCoIn

    @TechstoreCoIn

    3 жыл бұрын

    Not necessary

  • @abhishekkumarsirdar5093
    @abhishekkumarsirdar50933 жыл бұрын

    Please provide link for hp bs670tx model hinges broken

  • @TechstoreCoIn

    @TechstoreCoIn

    3 жыл бұрын

    please write a mail to sales@techstore.co.in

  • @suhelkhan3721
    @suhelkhan3721 Жыл бұрын

    Bhaiya mera bhi same laptop hai hp ka jo aapke pass hai or mera left wala hinge toot gaya hai or repair karne wala bol raha hai pura frame banega 2000 main kuch suggestion de skte hain kya

  • @TechstoreCoIn

    @TechstoreCoIn

    Жыл бұрын

    He is right. Please subscribe for more info.

  • @debabratatah4887
    @debabratatah48873 жыл бұрын

    Sir, I am using Dell inspiron 15 5580 laptop. one hinge and the black bezel has came out but the back cover is totally fine. But the guy in repair shop is saying to replace the total backcover and all hinges including the bezel, i think u can understand kya replace karne ke liye bole rhe he. Sir is it necessary to replace total back cover as it is so costly?

  • @TechstoreCoIn

    @TechstoreCoIn

    3 жыл бұрын

    Yes it is necessary to replace the whole back cover. kindly ask him to loosen the hinges.

  • @debabratatah4887

    @debabratatah4887

    3 жыл бұрын

    @@TechstoreCoIn can u tell what is the price of dell inspiron 15 5580 model back cover?

  • @classiccarszone3769

    @classiccarszone3769

    3 жыл бұрын

    No. It is possible to fix the nuts with a mix of baking soda and super glue. That works.

  • @LearnWithNeeraj777

    @LearnWithNeeraj777

    2 жыл бұрын

    Indian repair means simply replace... So sadly these inefficient service center will ask you to buy a new panel for even one screw issue

  • @gonzalezalbertodiego600
    @gonzalezalbertodiego6002 жыл бұрын

    Where can I get parts for this laptop?

  • @TechstoreCoIn

    @TechstoreCoIn

    2 жыл бұрын

    Please do subscribe. We will reply.

  • @sanketgupta5271
    @sanketgupta52712 жыл бұрын

    sir can we say that aluminium laptops are better in case we don't want our panel to break down?

  • @LearnWithNeeraj777

    @LearnWithNeeraj777

    2 жыл бұрын

    Yes indeed, these cheap plastic frames break with time and even for one screw slot broken we need to change entire panel which costs 3-4 k

  • @sanketgupta5271

    @sanketgupta5271

    2 жыл бұрын

    @@LearnWithNeeraj777 last year, I got mine repaired(NOT PANEL REPLACEMENT) with some screws. Now I have purchased a cheap panel online(Rs.900), I was thinking whether to replacement this broken panel with this NEW cheap panel that I purchased or not, what do you think

  • @LearnWithNeeraj777

    @LearnWithNeeraj777

    2 жыл бұрын

    @@sanketgupta5271 yes why not if it compatible with your model go ahead... You can do it yourself of get it done by some shop giving 2-3 hundred rupees. In my case i ordered the original one from acer it's costing me 4k for complete panel and 300 service charge

  • @philiptheobald2145

    @philiptheobald2145

    Жыл бұрын

    I have an aluminium 15inch x360, the flimsy brass inserts are embedded in plastic at each corner of the screen,they broke out and cracked the digitiser ,will never buy HP again .

  • @vkdem
    @vkdem3 жыл бұрын

    One more question: One of the screws on back portion is just spining. Neither coming out, nor tighten. It's under the rubber on the right side which close to hinge. May I take the bottom part while that screw in place?

  • @TechstoreCoIn

    @TechstoreCoIn

    3 жыл бұрын

    It means that your screw holder is damaged. yes you can remove it while taking the bottom part out.

  • @saroj4359
    @saroj43592 жыл бұрын

    Sir I have the same problem costing me 2500 is it fair

  • @TechstoreCoIn

    @TechstoreCoIn

    2 жыл бұрын

    Please do subscribe. We will reply.

  • @abhishekkumarsirdar5093
    @abhishekkumarsirdar50933 жыл бұрын

    Link for laptop frame???

  • @TechstoreCoIn

    @TechstoreCoIn

    3 жыл бұрын

    PLease mail to sales@techstore.co.in

  • @GoDGaming-ig5uw
    @GoDGaming-ig5uw3 жыл бұрын

    Sir o change karna kya liya kitna rupes lagega ?

  • @GoDGaming-ig5uw

    @GoDGaming-ig5uw

    3 жыл бұрын

    mera vi same prblm hai sir please thora jaldi batana sir

  • @TechstoreCoIn

    @TechstoreCoIn

    3 жыл бұрын

    write a mail to sales@techstore.co.in

  • @ritwikghosh8174
    @ritwikghosh81743 жыл бұрын

    Same model same thing happen even same sideshop charge me 1500 for only replaced

  • @TechstoreCoIn

    @TechstoreCoIn

    3 жыл бұрын

    This model is doomed...Most laptops of this model are havin this issue...

  • @engineeringlifeline6559
    @engineeringlifeline6559 Жыл бұрын

    Bhai mere laptop or bazzel me gap araha hai help me thin bazzel

  • @TechstoreCoIn

    @TechstoreCoIn

    Жыл бұрын

    we have.

  • @engineeringlifeline6559

    @engineeringlifeline6559

    Жыл бұрын

    ​@@TechstoreCoIn hp pavillion 15

  • @yousefs.t.s2084
    @yousefs.t.s20843 жыл бұрын

    I am using hp 15-bs128ne. Does it support m.2

  • @TechstoreCoIn

    @TechstoreCoIn

    3 жыл бұрын

    m.2 SSD is supported. Please dont use NVME SSD.

  • @sahidgoldar3061
    @sahidgoldar30612 жыл бұрын

    I have a hp "15bs541tu" Note book, One year ago my laptop hinges is broken & I go to hp store for hinges reapir, & I have three thausend two hundred rupees for Hinge repair cosse it, The issue is Hinges is hard & so tite . So I am asked hp 15 bs series is a Very Very bad product.

  • @rishabhbatra7483
    @rishabhbatra74832 жыл бұрын

    the plastic body of such models is crappy.. easily gets broken away from the hinge screws.

  • @vkdem
    @vkdem3 жыл бұрын

    What to do to prevent this kind of breaks?

  • @TechstoreCoIn

    @TechstoreCoIn

    3 жыл бұрын

    Immediately loosen the hinges.

  • @vkdem

    @vkdem

    3 жыл бұрын

    @@TechstoreCoIn, thank you friend. Even I just want to loosen it, do I have to dismantle so much? Or a short version possible?

  • @nayankapadia2277
    @nayankapadia22772 жыл бұрын

    voice hi nahi aa rahi hai ap kya bolte ho

  • @techstatics2442
    @techstatics24422 жыл бұрын

    Hp common problems

  • @subash580
    @subash5802 жыл бұрын

    should hav used wd 40

  • @TechstoreCoIn

    @TechstoreCoIn

    2 жыл бұрын

    How will it help. Please let us know. We will surely integrate if found useful henceforth.

  • @subash580

    @subash580

    2 жыл бұрын

    @@TechstoreCoIn instead of using coconut oil ... Wd40 is specifically made to lubricate and remove stains and dust... I'm a technician too

  • @pranamep2605
    @pranamep26053 жыл бұрын

    very disappointed with hp laptop. same problem with me.

  • @TechstoreCoIn

    @TechstoreCoIn

    3 жыл бұрын

    No doubt. Share amongst your group such that it reaches to the top officials of HP

  • @LearnWithNeeraj777

    @LearnWithNeeraj777

    2 жыл бұрын

    It's a business policy to make more money from after sales than in sales...

Келесі