Hands down best boat repair show there is.

I love your channel! We just bought a 43 Spindrift and need to redo the teak deck. You are awesome! I will be watching all of your videos.

Great information, as always. If you ever have a client that wants to remove the teak decks and go to non-skid, I would love to see how it is done. Thanks again for all the great videos.

This is the best tutorial on replacing caulk on a teak deck, that I have cseen so far. The advice regarding use of the razor knife, reefing hook and the multitool I found to be spot on. My only comments are to follow the TDS recomendation to first clean the deck using their teak cleaner and the use of blue painters tape prior to caulking. The TDS cleaning worked well and the painters tape was quick both to put on, and remove afterwards. It really was a snap, saving a lot of teak from being sanded away.

The number one guide to teak deck caulking - thank you!

Hi Andy. Still rewatching in August 2021 at your new shop. Love the videos and educational information. Great video thanks 😊

Thanks for producing a clear and to the point vid, great job, but you knew that already.

I love watching your shows! Your explanations and techniques are eloquently explained and the touch of humor is great!

@boatworkstoday

8 жыл бұрын

Thank you! Really appreciate the kind words :-)

My brother just bought a ocean 40 and he wants me to fix it, after looking at your tutorial video, I was amazed on how you explain everything, I love your videos and, well what else can I say, thank you

Brilliant. Crimping the end of the caulk tube to get into the groove.

these videos are great and so helpful! really well explained as well, great job doing these!

Excellent videos Andy. I'm learning such a lot. Thanks so much.

Another great video, thanks Andy!!

Thank you for all of your videos!

Brilliant, very well made and super informative. thanks !

I know this video was done almost 6 years ago, but only now seeing it. DYNAMITE! Great instructional video.

Best video on this subject on KZread

Thank you for a most interesting demonstration on how to replace teak decking bunges. I have many to do before the sailing season starts but have been reluctant to attempt doing without proper guidance. Hopefully, it is as esy as it looks!

What a great video! I love the all the information and the way it was presented. Subscribed!

I re-caulked a Camper & Nicholson 60' in South of France some years ago. I wish I'd seen this excellent demo' before I started though; it would have saved me a shed-load of masking tape...

Fantastic guidance. Thank you. First time watched and we had to subscribe.

Excellent demonstration! Thanks

The best video I have seen hands down !!! 👍🏻

YOU ARE THE MAN!!!!! thank you so much for such a great video. We love your videos keep up the great work!!!! -Crew of S/V Agape

Very helpful thanks. Until I saw this I was considering removing the teak- due to screw leaks and old (expensive) calking.

Great information thanks from the Netherlands!

This is the best KZread boat repair guy in the world!

Sei la mia enciclopedia. Grande!

You are my Yoda on glassfiber work! keep it up :)

Really great video

what a great job mate..love it

I love your videos, thanks a lot!

Wow great job. been watching your vid and learning alot. Thanks

@boatworkstoday

8 жыл бұрын

Much appreciated! Thank you ;-)

Great video.

Great work! Thank you very much!

Awesome advice you gave us.

Very tedious work here and dude knocked it out like a champion in 3 hours!!!! Thanks for the upload you’re going to save me loads of time, just don’t tell my wife🤣

Nice work as always.

@boatworkstoday

8 жыл бұрын

Thank you! Appreciate the kind words :-)

BTW great resource and channel thanks for all the videos!!

Awesome! Thank You!

great video thank you

Very helpful thanks for sharing

Thanks!!

Great video!

@boatworkstoday

8 жыл бұрын

Thank Guys!! Much appreciated ;-)

Great work, thumbs up.

@boatworkstoday

8 жыл бұрын

Thank you! Much appreciated ;-)

Great info....i like

fantastic video. Covered process as well as options to handle different issues that may arise (i.e. fein tool). The second sanding to remove the caulk was 80grit but what about the first? Love this channel and have subscribed.

Thanks!

I second that!! This is the best channel. Absolutely the best . Thanks for all your great work.

Great video (again). Is that caulk good for anything else, maybe around gelcoat? Must be good stuff to keep water out of teak. Thanks for the education and your love of teaching.

Excelente explicación gracias

thanks great tip

Thanks for a great video! If one of the planks has partly came loose from its adhesive, is it an idea to pour epoxi through a little hole to rebond it? Or how is it to be done? Thanks alot!

I must say awesome video's! You explain everything in detail and show everything in detail. Very educative.

Have you thought about pouring a penetrating epoxy into the seams/missing bungs before installing new caulk? To prevent water from making its way into the screw holes.

Pleasure to watch

@boatworkstoday

7 жыл бұрын

Thanks Jim!

Thankyou for this video, just what I (my boat needed). What do you then treat the teak with after it's been sanded? Oil??? Cheers

nice work

@boatworkstoday

8 жыл бұрын

Thank you!!

Thanks

Great!

Can you please go over how to replace the bungs on the screws where the bung has come out? great series and thanks for making your channel a full time endeavor!

@tristan4427

5 жыл бұрын

Usually the reason bungs will pop out is because the deck has been sanded and refinished so many times that the bungs have literally been sanded off. It's wise to check caulking gaps to ensure that theres actually sufficient space left for your caulking, because if not, the deck will fail anyway and it's all become a lost cause. As far as just replacing bungs, you need two tools: a bung cutter and a counter-sink bit. First determine what size the original hole is, and then make plan to drill the hole out one size larger. The main reason for oversizing is to remove old deteriorated wood and to give the bung a new surface to bond against. Remove the screw from the hole. Drill out with your countersink. Cut a new bung with your drill press and pop it out from the wood blank with a flathead screwdriver. for extra precaution, when reinstalling the screw, inject epoxy into the hole first. Drive the screw next and then inject epoxy around the rim of the hole. Next, pound the bung in. Once the epoxy sets, pair the bung off with a chisel. If you have any more curiosity, I have been doing alot of teak deck installation and you can find me on instagram @deyoung.designs

Thanks for the information.What are your thoughts on oiling a teak deck

Awesome vid Andy! now to try and tackle my 36ft swedish yacht. What tool would you use to make the grooves deeper? Some people have suggested a router but I'm not so sure..

Really clear - thank you! Would you do anything differently with an Iroko deck?

Just curious: is there a reason why you sand after removing old caulk, and again to remove new excess caulk? Does that have any benefit over just sanding it once after applying new caulk?

Great video! Do you seal the teak deck before or after adding the fill? What product?

Thanks for the video! Quick question...so is it enough to sand and replace the seams, without treating the teak with all sorts of two-step chemicals? I'd like to keep my teak as natural as possible, and not have to apply things on a yearly basis, so you tutorial seems perfect. Just wanted to make sure before I get down to it, that it's okay to leave it as is after sanding?

Great video! I was wondering, can this caulking be used with polyurethane for a hardwood floor? Sorry if this is a stupid question, but i love the look of that and would like to incorporate it into my Livingroom floor. Thanks!

Loved your video. About to tackle a sumlia job. Where can we get all the tools and materials. Thx a bunch.

How were you able. To get the fine-line tape to stick to the bottoms of the grooves? Every time we have tried it, it would curl off the bottom, even rising up through the caulk (Boat-Life polysulphide). Thanks,

BoatworksToday I’m using the sis-440 to caulk my deck. What kind of bedding compounds/ marine sealant adhesive can I use in conjunction with that will bond to this product? Thanks, matt

Agreed

Great Video, how did you repair the screw heads?

Hi Andy- In this video I see that you do an initial sanding when all the caulk is removed, and then sand again once the new caulk is spread out. Is there a reason for the initial sanding? I'm just asking bc I'm cautious to preserve as much of the remaining teak material that I have, and don't want to sand twice unless needed. Thx!

what type of decking compound would you use on a white pine deck? I have a '74 Concordia Schooner and am redoing the deck seams...I have heard the old hot tar method or a two part polysulfide ...or sikiflex and or boatlife...i dont want to have to do this again so whatever is the most durable and sealing

What are the products to use on this wood after sanding? Thank you for the video. I appreciate your response

How do you deal with teakdecks that were glued on to the fiberdeck below? I have an older Bavaria sailboat where the entire teakdeck seem to have been glued on to the original fiberdeck in large sections. My teakdeck consist of a thin teaklayer on top with plywood underneath - all in all - about 5 mm thick (not much, I know). Now the deck has started bending and does no longer bind to the fiberdeck. Do you have any experience by dealing with that kind of teakdeck -and how to repair it (getting the teakdeck to bind again?)

If you "push" the caulk instead of "pulling" it fills the gap better and you use less product, which leads to less sanding...keep up the good work..

I have heard of people using glazing putty Dap 33 and tinting it. Would you recommend that practice.

Love your show and recommend you to everyone in the marina. Sorry this question is so late but just encountering this issue. We have a 1968 Cheoy Lee with high bulwarks. It appears that someone repaired the deck a few decades ago but could not get close enough to the bulwarks to increase the pinching seams so they left them. We replaced caulk (which was completely missing) last summer but it is already coming out. Will the Fien OMT blade allow us to increase the seam size so we can add caulk? Or do you have any other recommendations. Perhaps a router with a really HUGE jig/base? 🤔 Help? 😢

I'm doing the helm deck is there any stain that should be done for protection or just salt water

Lots of great tips here. What I thought was a great tool was that chisel. Where did you find that Japanese style chisel ?

Do you put any finish on the teak afterwards? Is there one you recommend if you do?

Nice vid. The though of refinishing a teak deck on something like a Hans Christian 38T....eek.

@boatworkstoday

8 жыл бұрын

Lots of work :-O !! But a nice boat to be working on ;-)

Wish you were in Los Angeles... I’d hire you to patch up my 73 chris craft teak deck... it’s been at least 30 years since it’s had any attention...

how long do you wait before sending? which sika would work for this? tnx

Do you put any kind of oil or anything on the wood after sanding it?

How long will you have to wait for the caulk to cure before sanding?

Where do you get replacement sand paper for seam sander ?

Quick question. Why sand the top of the deck before and after caulking? Couldn’t you just sand once after the caulk dries?

Great video. Very informative. One question... How thick should the teak be to even he consider refinishing it? There is about 8-10 cm of teak remaining on the decks of my boat. Many bungs have been lost to time and tides.

@sprezzatura8755

4 жыл бұрын

I think you mean millimeters which in that case there is plenty of meat left on your teak. If you have lots of teak bungs missing, then sometimes the best way to go is to remove all of them along with the screws (one at a time) and re-drill each screw hole one size larger, and slightly deeper. The new screws should be slightly shorter, so the net depth is the same and the screw is well below deck surface so the bung can easily cover it. This is a bit more time-consuming and tedious but I think the net result is superior.

What do you do to seal the teak after sanding?

how do you determine if the teak needs replacing or can be repaired?

The cockpit in my yacht is all teak. And really far gone.... hitting it with my random orbit sander i can "level" out the warping in the timber but all the caulking can be pulled out easily by hand. My plan was to pour uv treated epoxy over it after a fine sand ( to create a hard seal ) thoughts? 😂🤔

30 years old...that actually looked to be in amazing shape. Obviously the owners did take some care of that. I just pulled the teak off the swim platform of my boat...UGH, what a MESS. It will take me hours to clean that up...and that's no caulk...it's strictly cleaning, sanding, oiling... :( GREAT work as always!!!

@boatworkstoday

8 жыл бұрын

They took very good care of her; indoor storage every Winter, regular maintenance and upkeep; decks were the last item on their list of To-Do's :-) On your platform, have you tried a teak cleaner before? Teak Decking makes a couple really good cleaner / brighteners that are eco-friendly.

@WreckDiver99

8 жыл бұрын

I'm using a Cleaner/Brightener...but the people that had the boat before us varnished the tops...so that's in bad shape. Not a hard job to be sure, just time consuming. :(

Sorry 4 my english ,I am from Italy,when I pass Sikaflex on the deck,comes out Little Holes,Always,how come?

hi, i have heard that sikaflex isnt the best anymore, the quality has changed.. it leaves you with black colour on the skin 1 month after putting it on.. can you tell about your experiences..? thanks -- stefan

Great vid- How manny tubes did you use to do that deck? I'm planning on using white caulk- I have a 23ft stonehorse sailboat with a full teak cockpit. Thanks!

@boatworkstoday

7 жыл бұрын

the deck was roughly 10x12 and I think I went through nearly 2 cases (12 tubes per case) but these were very deep seams.. Almost 3/8" deep

No staining the teak? Wouldn't staining be a good thing to do?

There isn't a line around the corner for ypur work?