How to : Working GU Patrol Tail Lights

Автокөліктер мен көлік құралдары

HOW TO MAKE YOUR PATROL TAIL LIGHTS FUNCTION!
Here is a walkthrough on how I wired in the tail lights in my GU patrol.
I purchased series 3 tail lights that are fitted with globes and wiring from Ebay (link below) and replaced the factory tail lights. I joined the wires from the passenger side body harness to multicore wire, snaked them through the roof internally and down the drivers quarter to the drivers side tail light. From here, I fitted the wires into a plug and that's how easy it is.
Here is a link to the Tail Lights I ordered. The price has increased drastically since I purchased them.
ebay.us/afIiju
Here is a link to identical lights for a much better price from another seller that I buy from frequently.
ebay.us/n1RVfa
When you click on the above link and make a purchase, this can result in myself earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
If you have any tips or questions use the comments below.
Music
Summer Flirt / Autohacker / courtesy of www.epidemicsound.com

Пікірлер: 18

  • @user-sg3fm7sk8l
    @user-sg3fm7sk8lАй бұрын

    it's really helpful mate, thanks for all your videos

  • @ReubsModifications

    @ReubsModifications

    Ай бұрын

    Thanks mate glad you appreciate it 👍🏻

  • @Jack_spry
    @Jack_spryАй бұрын

    Looks good all fitted up.

  • @ReubsModifications

    @ReubsModifications

    Ай бұрын

    Much better than the split ones I had in there 😂

  • @oz-wozza
    @oz-wozzaАй бұрын

    Such helpful information, as always. I'll be using this when I do my tail lights. Thanks for posting.

  • @ReubsModifications

    @ReubsModifications

    Ай бұрын

    Thanks mate always great to get positive feedback 👍🏻 let me know if you run into any issues.

  • @bentheguru4986
    @bentheguru4986Ай бұрын

    Cheers Ruebs, FYI, lights cable can run under the rear plastic strip on floor at rear, likely under your drawers. The rear quater (if not chopped) has holes and gromets to use if needed.

  • @ReubsModifications

    @ReubsModifications

    Ай бұрын

    Thanks Ben, as always excellent information and tips 👍🏻

  • @bentheguru4986

    @bentheguru4986

    Ай бұрын

    @@ReubsModifications One day, I might have to come for scoot and roll up on your workshop. Cheers man, keep up the work and the great attitude.

  • @ReubsModifications

    @ReubsModifications

    Ай бұрын

    Sounds good hopefully I turn some of my mess into some nice running cars before then 😂

  • @that_crankytf9571
    @that_crankytf9571Ай бұрын

    What ever happened to the sassed d22

  • @ReubsModifications

    @ReubsModifications

    Ай бұрын

    Shes still sitting in the same spot in my shed, need to find the time to get back onto it

Келесі