Superb explanation which will help many like me that were confused by how the kit was configured…. thank you !

Brilliant explanation! Saved me a lot of headache trying to figure out what I needed. Much appreciated

Dummy proof explanation, thank you mate. Must be toasty in winter

Really perfectly explained and easy to understand. Thanks very much😀👍👍

SOLD! Thanks to this great explanation.

Great video and explained well in my opinion they are absolutely fantastic and the socks well no more cold feet for me the jacket is perfect and the gloves are bang on

Excellent. Very well explained and illustrated👍

Great video. It helped me alot understanding more of this system. Cheers!

Thanks for the video on how to use heated gear! Very well informative!

Awesome review mate , great explanation on this thanks for sharing

Thanks for the video. I just got the jacket but I find it’s not very warm… it was a 12 degree day in the UK here and I had it set to number 5 and could barely feel much warmth from it, but other people say it’s too hot to even run it on 5??

@Motourev

7 ай бұрын

I can only have mine on number 2, might be worth contacting Gerbing incase it’s faulty.

A well put together How to video bud 👏

Really good video. Thanks for this. I have the single controller and all the gear, but the trousers burnt a massive blister on my right cheek and a bit on the left where the pocket is. It feels like there is a coil where it burns on the right cheek. It was on the 3 setting, 4 was unbearable. I have to pad it up by adding long John’s and two more pairs of underwear just to keep it from burning on the same spot. Everything else is great, gloves , jacket and socks. Is this something you experienced or have advise for ? I’m now sending the trousers back for exchange to see if it’s this pair I got.

@Motourev

Жыл бұрын

Sounds like the heat element is in too closer contact with skin, it may have moved from the isolated layer or could be resistance causing it to get hotter. Best thing is to return for Gerbing to check

I have had Gerbings previously and i never can figure out why the stick to 2 x 90 degree connectors. I had faulty cables twice because they are all angled.

That's some very good gear there and well presented mate I have saved that because if I do get some heated gear it's gonna be this .I am guessing you buy the controllers separately from the rest I will be checking out the website . Thanks : D

@Motourev

2 жыл бұрын

They are amazing, there are a few other brands on the market but when I did my research Gerbing were the leading brand world wide so I decide to go with them. I tried the other brands at the motorcycle show but found Gerbing were far superior in heating. It’s a costly investment but worthwhile as now I can ride all year round and not have to worry about the extremities

Would the full Gerbing Heated suit work good on and ATV? I use my quad for plowing snow in the winters for my own yard, and about a dozen other people, thought about this set up for the socks, pants, jacket and gloves, than toss my really thick winter coat over top to trap the heat in while I'm out for 5-6 hours, I have a separate heated snowmobile helmet that keeps the visor warm and clear, but do find inget a little chilly after about 4 hours of being out in -25C in just my normal winter jacket and ski pants.

@Motourev

Жыл бұрын

Should work fine, as long as the adv has a 12v battery

Excellent video. Thank you

Very useful thanks a lot !

For the life of me, I cannot figure out how to order from their website. I'm in Maryland, USA and, in the check-out, it defaults to the UK or nothing at all. It just won't accept a non-UK address. Per their shipping policy, it appears they do ship outside the UK. Winter is coming, friends. Any recommendations?

@Motourev

Жыл бұрын

Fill out the contact form on the website, they are very helpful

Makes sense now, thanks

Excellent video!!!! A quick question from this novice electrician.....if the battery supply is connected per your explanation, could i use a "coax male to SAE" adapter to then use that connection to power my battery tender when im not riding?

@Motourev

Жыл бұрын

Yes I believe you can. I know you can but the optimate connector that you can use to charge the battery when not using the clothing.

Great video again well put together 🤘

Hi , I have the new gerbing xr extreme gloves . Very warm . However , in rain they become soaked . Do you have this issue ? Advice ?

@Motourev

Жыл бұрын

Leather always soaks in water, use this it’s amazing NIKWAX WATERPROOFING WAX CREAM FOR LEATHER EQUINE HORSE FOOTWEAR CARE amzn.eu/d/jemsxzE

Hi Mav,my gloves are coming next week,is your power supply direct to your battery,if so does it drain the battery when not in use,,,Cheers Baza Ride Safe Mr B \m/

@Motourev

8 ай бұрын

Yes always make sure the engine is running when the gloves are on, they draw about 7amp and that’s a lot on a battery where the engines not running

Brilliant video. It should be posted on Gerbing UK website as a freaking manual )) p.s. One thing I don't get is how do you connect gloves to a jacket because cuffs on these gloves go over your standard motorcycle jacket...so the port/cable on the gloves goes outside, but the cable from the Gerbing Jacket Liner will be on the inner side of your motorcycle jacket or did I miss something?

@Motourev

Жыл бұрын

They are long enough to come outside of the cuff of your jacket and into the glove

Good video mav and if you are going on a long trip would be brilliant but if I had to have that lot on to go out on the bike I think I would put the kettle on and say sod it ha ha ps very well explained mav

@Motourev

2 жыл бұрын

Agree mate this is for the big days out. Normal winter riding I would wear the gloves and socks every time, if I do a whole day out in the cold which I plan Wednesday then I would go fully suited and booted.

@jimhammond6395

2 жыл бұрын

@@Motourev look forward to the vid and be careful out there

@Motourev

2 жыл бұрын

@@jimhammond6395 will do buddy ❤️🤘🏻

@lipsee100

2 жыл бұрын

@@Motourev Ho hum,, I actually have the warm/safe jacket &pants, and have ellecy gloves,,, BUT having the full system is just too much faff,, so what I do is plug the jacket in (I ,v never used the pants) done.... Now I do not plug my gloves into my jacket (thats too much faffing) I plug the wires into my starter battery (line out) that I keep in my tank bag,, I have a small cheap controller to adjust as necessary.. I just find it so much better,, Yesterday I came down to London on my small bike ,, the electrics are not man enough to run the jacket and all .So I just used the gloves plugged in the starter battery and it worked a treat.. The starter battery is the Noco GB70 (no small affair and weighs abit,but will start a small Jumbo 747) I must say I have been enjoying your channel,, and intend some day to visit Minimotos..(or whatever)

@Motourev

2 жыл бұрын

@@lipsee100 that sounds a good set up and it’s obviously working for you 👍🏻

I have the xrl and the premium jacket. I bought a dual controller but gerbing have said I can’t use the dual controller with the gloves !! I haven’t come across the single controller that bypasses the power to use the gloves.

@Motourev

Жыл бұрын

Yes the gloves don’t use the controller. This is the single controller, the blue end is for the gloves gerbing.co.uk/collections/gerbing-temperature-controllers/products/gerbing-portable-digital-jacket-temperature-controller

I can’t find a single controller like that with the blue connector. Can I ask where you got it from.

@Motourev

Жыл бұрын

gerbing.co.uk/collections/gerbing-temperature-controllers/products/gerbing-portable-digital-jacket-temperature-controller

@sobrien7944

Жыл бұрын

Thank you

Have you compared to Keis ?

@Motourev

Жыл бұрын

I tried their gloves and jacket at the motorcycle show and preferred Gerbing as they provided more heat.

I have the gloves and jacket with the single controller. Gloves get warm but don’t feel much if anything in the jacket, even set on 5. The heat in the jacket seems to come on until I power the gloves on, then I don’t feel the heat in the jacket. Any ideas?

@Motourev

Жыл бұрын

That sounds like your bike or battery is struggling to put out 9amp as if it’s overloading it. I would try on another bike and if it’s the same it might be the single controller but if it works then it’s your bike.

@Motourev

Жыл бұрын

Also what size fuse do you have in the wiring

@Midlife5

Жыл бұрын

@@Motourev Thanks for your reply. I’m running it all off the pigtail supplied by Harley Davidson for the battery tender. They said it would be ok but I’m thinking that maybe the fuse in it isn’t sufficient. Maybe I’ll need to put the dedicated harness with the 10amp fuse on? What do you think?

@Motourev

Жыл бұрын

@@Midlife5 yes 100% I would put the dedicated harness on, I bet the bike restricts that amount of amps through any of its wiring loom as it is a high draw of power.

@Midlife5

Жыл бұрын

@@Motourev thank you so much for helping.. I’ll do that over the weekend and hopefully it resolves the issue!!

Is it working with a power bank?

@Motourev

Жыл бұрын

You need a power bank that can provide 7ah

I know they have a good reputation but I can’t help but think the wiring looks like a Version 1 prototype before a final version was created.

@Motourev

Жыл бұрын

😂👍🏻

Where the hell are you supposed to put that bulky controller?

@Motourev

7 ай бұрын

I have mine on my tankbag

I have Gerbing gloves they are average at best for the money, batteries and wiring arent so good, awkward and rust easy, I don't recommend them

@Motourev

Жыл бұрын

😂👍🏻