No video
How to wind and rewind an RC brushless motor | part 1
Support my work / pawelspychalski
Brushless outrunner motors are the working horse of RC hobby. They power everything now: drones, airplanes, cars, boats. And from time to time they just burn. You can buy a new one, they are not that expensive, but you can also rewind them.
To rewind brushless outunner motor winded in dLRK (95% of cases?) you only need 3 things: motor, wire and time. And a knowledge how to do it.
In this video I show how brushless outrunner motor looks like inside, 12n14P (12 coils, 14 magnets), present dLRK winding schema and two possible ways to terminate phases: Delta and WYE (Star).
How to wind and rewind an RC brushless motor | part 2 • How to wind and rewind...
Пікірлер: 55
How to wind and rewind an RC brushless motor | part 2 kzread.info/dash/bejne/l6Z9mbmQn7TRlLA.html
@hardikyadav5277
Жыл бұрын
hey, I have READY TO SKY 2212 1000Kv 3s Motor how I rewind it to run on 12s battery?
Thank you so much. I have a motor.. a unique motor of a costumer. And practically it is different but theory was same as your motor. You helped me alot.
Clear enough to understand... i think with this clear teaching i can make one too.....
Thanks so much for sharing your knowledge. Very well explained on the 3 video tutorials.
Very well described to get to Star snd Delta.
exactly what i was looking to understand ...thankyou
Awesome very easy to understand. Thank you
8:27 how would this diagram look like for 9n12p motors?
Musze przyznac ze wyjasniles to perfekcyjnie oraz perfekcyjny angielski 🍻🍻
@FPVUniversity
5 жыл бұрын
dzięki
What does RC mean?
Yes my friend nice video thank u for the information
thank it work.
thanks
Very understandable video these type can you upload all types of motor submersible Mixy washing machine 3 stage speed motor such as table fan etc..
Mam uszkodzony taki silnik bezszczotkowy. Dwa zwoje są przepalone. Nowy b.drogi. Czy da się nawiąnąć taki nowy zwój znając srednicę drutu i ilość pętli?
How the magnets are arranged? N/S? OR ALL FACING N?
@FPVUniversity
Жыл бұрын
S/N/S/N
clear video.. thx
Dear sir. This is very useful vlog. Very good. ;) so....how to mod the rewind of 2300 kv motor so they can perform better for the race...yes of course for adding some thrust and running 4s. I want to push them for their optimum performance? Is it possible?
what are about 36 poles wiring ?
Thanks for this intrusive video , my question is the number of magnetic is 14 are it is constant for this motor or we cane increase and decrease it what is the effects best wishes
@FPVUniversity
6 жыл бұрын
yousif esmail no you can not just increase or decrease. There is limited number of valid combinations on number of coils and magnets.
hii, how to determine to make our rewinded motor can get 4S or event 5S Lipo support..?
@FPVUniversity
4 жыл бұрын
By testing probably. I mean you can compute power under load and heat dispassion but the best way is just to test it
Thank u for this video but I got a question it's not that easy to wind it are the wire are coated?
@xnoreq
4 жыл бұрын
The insulation is just a very thin and flexible layer so it doesn't really make it harder to wind. For example, a 0.3mm magnet wire I found has 0.02 - 0.03mm insulation thickness in its specifications.
Man i was looking for this simple explanation long Time. Thanks Alot. How about the magnet. N,S,N,S,N.... but how to arrange them ? Coil to cover every magnet or ?
@FPVUniversity
5 жыл бұрын
12 coils, 14 magnets. And yes, magnets got N S N S in a circle
There is modified dLRK winding method, that gives phase wires in pairs for delta connections. See here: rcexplorer.se/wp-content/uploads/2012/09/mororrewind.gif
Pawel, nice video. However, I think you mixed the facts. The number of coils (poles) affects the speed... not the number of turns in a coil. The motor speed is proportional to the number of coils/poles and the voltage frequency. Multiple conductors solution (instead of one thick conductor) is usually chosen because the electricity actually runs on/through the conductor surface (not the core). Therefore, multiple conductors can sustain more current and thereby produce stronger electromagnetic field. Other than that, you are mostly right.
not always 12 teeth and 14 magnets on an outrunner. there are many other combinations
@FPVUniversity
6 жыл бұрын
let's just say this covers all 220x and 230x cases.
After winding my bldc. It gets hot an burn
@FPVUniversity
3 жыл бұрын
That means you either have a short between coils or you connected coils in a wrong order
Magnets are in NSNSNS... arrangement?
@FPVUniversity
4 жыл бұрын
yes
@MasterTv_777
4 жыл бұрын
@@FPVUniversity how many magnets needed for 9 pole stator winding?
7:52 You got the second part of phase B wrong. It should have been CCW, CW. Not CW, CCW.
@rebelsfpv8846
4 жыл бұрын
Why?
I want some more information about motor wiring how can I contact you
@permanderyadav8826
6 жыл бұрын
How can we bind a 48v 1000w bldc motor for scooter that can run near about 60km/h (mainly my question is about coil binding just like coil binding wire size and how many rounds should be of wire in a coil)
Incredible video! Can we be friends? lol
You ask yourself why use a large rope without using many small strings
im guessing this is a DC motor?
@FPVUniversity
6 жыл бұрын
yes
@FPVUniversity
6 жыл бұрын
or rather not. This is a 3 phase AC motor, only the ESC is powered by DC
@edvinassarulis7526
5 жыл бұрын
Actually it's BL (Brush Less) DC motor
The details are hidden in the fact that the freaking Chinese never follow the technical specifications. And even if a triangle (delta) (T) is declared on the passport, inside there will be a star (wye) (Y). After all, sometimes you want to save money, and buy a motor for more HF and simply slow it down by reworking it from a delta to a star.
U good but...
You ask yourself why use a large rope without using many small strings