The instructions that come with the LP kit are helpful but this was a great visualization and got me a good idea as to what needed to be done. I did mine in 15 minutes completed. Thank you!

Your video helped A LOT. Thank you. Watching it helped me understand what I'm looking at. I was actually able to get to the nozzle without taking the drum out of my dryer. The furnace part was right upfront and to the right, but very tight to get to.

I’ve done two of these. The drum does not need to be removed. There are four screws of one size and two of another. Plenty of room to do everything. In some disassembly manuals it says to use a putty knife to release a clip. Some models need the top to be slid forward.

This video was extremely helpful! Thank you!!!

Than you. Very well done.

Good instructional video. Misses final pressure check using a manometer (manufacturer CYA) but otherwise is helpful to show a DIY'er whats involved rather than resorting to hiring a service pro

Why did you not install an air shutter on the burner? LP needs an air shutter

The directions that come with the kit say use size 54 on Propane and 55 for Butane, but this kit for a 22000 btu mine is 20000 btu so I will use the 55.

I bought the "Whirlpool" kit and it says to use the "orifice labelled "54" for propane.. and NOT the "54" for BUtane.. which is it?

you all really need to use a different narrator. i struggled with interpreting some of his accent, close captioning was tricked too. aside from that, hugely helpful