Thank you so much. Couldn't have done it without you.

Thanks for the great video. It was a tremendous help. Changed out the motor in about an hour.

@appliancepartspros

7 жыл бұрын

Glad the video helped you out!

@johnjarzabkowski8612

5 жыл бұрын

Liar liar plants for hire.

Thanks for showing the chisel technique. I thought I was going to buy a new dryer after the 1/2 square drive spun in the blower… Does the idler pulley get any grease or anti-seize lubricant?

Thank you very much for this very clear instructional. I was able to determine it was my dryer motor. I was able to follow your instructions to the letter. My wife has her dryer back and it is purring beautifully!

@appliancepartspros

8 жыл бұрын

+ANDREW THORNE Awesome, glad the video helped you get the dryer up and running!

Thank you for the great information sir!

This video was excellent. Only had one difference with my dryer. There are two wiring harnesses that are clipped on the controller board panel that needed unclipped before you could rotate it out of the way. Also, one note that cost me more time was when you plug in the broken belt sensor (with the wire closest to the power connector), make sure you plug in the top connector (closest to the other plugged in connector) and not the bottom. Motor will just click when you try to start if you use the bottom one.

@appliancepartspros

6 жыл бұрын

Thanks for your feedback and your tips! A single part can be compatible with many different appliances. We film the part on a single appliance model to serve as an example of the repair, but there may be slight variations in the process for different models, so we appreciate the information about how the repair went on your particular unit.

@johnjarzabkowski8612

5 жыл бұрын

This video was very NOT excellent.

Great video!

Me: Tells wife I can fix dryer Also me: Breaks blower wheel has to get chisel and hammer to get it out.. Wife: ( watching with worried face) honey are you sure you know what you are doing..... Me: don't worry I got this...

@LuisdelaRosa

Жыл бұрын

😂 5:49

Just needed somebody to say i was right and breaking things is the only way sometimes lol thanks bud

Hey, I believe I have a motor failure of my Duet gas dryer. Model label is gone but looks exactly like the one featured in this video, control panel and all. When I turn it on I get a buzzing noise for about 3 seconds then a click and the buzzing stops. The dryer does not spin. The control panel operates as if the dryer is turning when this happens. If I reach inside i can turn the drum by hand clockwise but not counter clockwise. I am being told the motor is bad. Can you confirm this based on the information I have given?

@memoandmaria9430

5 жыл бұрын

I'm having the same issue, were you able to determine if it was the motor? I'd hate to replace the motor only to find out it was something else.

Motor in a Kenmore HE3 is making a load squealing noise. Sounds metal to metal. Guessing it is a bearing. Do you suggest changing the motor out. Thanks!

@appliancepartspros

7 жыл бұрын

I would check the drum support rollers and the idler pulley. If it is a motor bearing you would have to change the motor as they do not sell pieces of the motor.

@johnjarzabkowski8612

5 жыл бұрын

I suggest NOT watching this video and looking elsewhere for advice.

My motor #279787 does not have an open connection on the overload of the motor switch for the broken belt switch (dryer 100.62062103). There is only one terminal already connected to a black wire that goes to either the motor winding or the bottom of the motor switch. Motor will not turn on if I only connect the large white plastic wiring connector, ignoring the belt switch (making assumption it is by-passed on the new motor). How should the belt switch be wired?

@appliancepartspros

8 жыл бұрын

The video shows how to reconnect the wires from the broken belt switch. If you are having problems, I would suggest posting the problem along with the appliance model number on our repair forum and the techs can help you troubleshoot the problem. forum.appliancepartspros.com/

Thank you for giving me hope removing my motor.

How do I take screw/bolt off motor the one that screwed blower wheel?? Mine doesn't want to come off

@appliancepartspros

7 жыл бұрын

Without knowing what you have, I would suggest posting the problem along with the appliance model number on our repair forum and the techs can help you troubleshoot the problem. forum.appliancepartspros.com/

@flipg7492

7 жыл бұрын

AppliancePartsPros thanks but we got it!

@IglesiaDeDiosIsraelita

3 жыл бұрын

@@flipg7492 how did you get it out?

Very helpful thanks

@appliancepartspros

9 ай бұрын

You are welcome!

great video made it super easy,

@appliancepartspros

10 жыл бұрын

Awesome job on getting the dryer motor changed out!

@johnjarzabkowski8612

5 жыл бұрын

I call BS on your comment, Dave Ammons

There is no need to remove the motor mount bracket. just remove the motor from the bracket while it is still in the dryer.

@appliancepartspros

9 жыл бұрын

Steven Clarke Thanks for the tip!

@dasnitin

3 жыл бұрын

Was wondering that same thing.

This help thanks

Would be more helpful to know how to remove the fan withOUT breaking it. :(

@appliancepartspros

7 жыл бұрын

If it breaks free of the shaft with the extension then you just have to unscrew it. If it cracks or is stuck on then you would have to break it off!

@johnjarzabkowski8612

5 жыл бұрын

Finally, someone who understands me.

@franciscojaque1480

3 жыл бұрын

It’s impossible to tell if it will come off without breaking

OK, so apologies for below comment. After actually doing it I don't think it is possible to replace the motor without destroying the fan. So, if you are going to buy a motor for one of these do yourself a favor and get the fan at the same time.

@appliancepartspros

7 жыл бұрын

They do not all break but you do run the risk of damaging it!

@johnjarzabkowski8612

5 жыл бұрын

@@appliancepartspros No, Larry Fine from the Three Stooges; they ALL break. Now go roll in a pile of wet soiled undies (they're wet because this video gives you zero chance of fixing your dryer) for making this video.

That's a 120 volt plug in. Your working on a 240 volt Dryer. So People will unplug the Washer to work on a Dryer!, Good thinking!!!!

@appliancepartspros

5 жыл бұрын

The advice still holds true. Unplug the appliance you are currently working on.

@johnjarzabkowski8612

5 жыл бұрын

Phillip Bielefeld is a smart ass. I hope you have to do a hundred of these repairs before you wind up at the old folks home.

@BobbyBoats8008

4 жыл бұрын

Lol! Phillip... This is a gas dryer that does in fact have a 110/120 volt plug. See the gas coils when he lifts the drum out there smart guy?

I've spent 20 years of watching various people remove the covers from both the Duet Washer and Dryer just to learn 2 hours worth of repairs. You might realize that people who are going to get this far into a Dryer would know how to take off the bloody doors and covers already. Gimme a break!