*Good **MyBest.Tools** power and rpm control.*

Don't apply the wax in circles. Circles don't allow your hand to apply even pressure on the applicator pad, and that leads to uneven disbursement of the wax. Look at how the top of your swirls are whiter from more wax deposits and the bottom half of the swirls are darker from less. Apply in a north/south or east/west motion to avoid this. It also saves you more work during the buffing process.

i just love how the wire touches the car, great video man!

@RileyBanksWho

Ай бұрын

What a weird comment

Nice video, but you need to talk and explain and cut that crap annoying background music.

@captwar

9 жыл бұрын

A gm Come to think of it you are right. The video was nice but not all that helpful.

@opelpedia

9 жыл бұрын

Warner Athey we will do a remake and give all the explication needed : )

@nthlevel

8 жыл бұрын

+A gm (snowman) i thought the same, hurts my heart to see this guy use so much wax on the first coat. thin coats not plaster it on or you will use all your wax or have uneven surface

@adjmbb5109

6 жыл бұрын

It was good at the start

Nooooooo! This should be called "how to shine your hood and scratch the fuck out of your wings at the same time!"

Oh My God !!! the power cable on the paint........

@ral8031

3 жыл бұрын

😱😱😱

When you using a woolpad on the paint its getting little scratches in de paint when used a rotary polisher like you have. But you need to step it up to a second polish with a DA to remove any scratches, swirls, hotburns, and give it a IPA wipe down before getting the wax going on.

Really enjoyed the intro and EDM throughout the very informative video. Love it boss

Power cord over the shoulder to prevent scratching or upgrade to cordless. Could be wrong but aren’t there applicators for the buffer? Attach application pad, apply wax, when done remove applicator attach buffer pad and buff. Yes/No?

Awesome vid. Just looking to see what kinda job a auto buffer does and I can tell a pretty awesome quick job

@opelpedia

4 жыл бұрын

Thanks 👍

Your video is very nice. It's great seeing you have great success polishing your auto

@opelpedia

8 жыл бұрын

+MAD_aircooled_66 Thank you!

@notyodaddy1499

7 жыл бұрын

+belyeu4190 it is very nice

Why am I watching this I'm 12

You use the pad to remove any dust particles that might be on the car, you wash the car and drive it home were you are going to buff it so on that trip your car will have small traces of dust on it. And the second time you use the cloth is to remove lint from the buffing.

Why not apply the wax with the polisher instead of by hand?

Is that a Wen polisher? If not what brand! Like your video.

That paint looks new BEFORE the wax lol

You can clearly see the difference in the shine. Nice job.

@opelpedia

3 жыл бұрын

Thank you!

where do u find whool bonnets? for a 900 waxmaster? thanks, great job!

put your cable over your shoulder then it wont be slapping about your bonnet and re scratching it

@lululhad7948

5 жыл бұрын

@@LITTLEBRAT775081 you forgot to ask the question

I used to use that type of buffer years ago. I'd use a terrycloth bonnet to apply swirl removers or cleaner waxes, and remove by hand. I kind of miss the simplicity of those machines.

what kind of polish did you use first to get the shine? Wax is a protection not a polish. A

Salut, am și eu mașina ceva asemănător ca a ta, merge dat și polish? În video observ ca ai dat cu ceara..

This video should be called watch me polish my car.

One thing is still unclear: after how many uses do you put all that fancy equipment (starting with the pad) in the garbage?

Whose car is that flashes?

good job.

NEVER let the cord drag on the car. That;s a NO NO!!!

@kennethmaccourt7393

8 жыл бұрын

that's right! the cord could have dirt or grit on it and its like a file on your paint. I always put the cord over my shoulder.

cool musik wont do you justice

Muchos se obsesionan con aplicar mucha presión al equipo y no creo que se requiere con el propio peso de la máquina tiene

Two words, "Cherry crush."

i would apply wax with a machine, but be quicker to buff it off with a microfiber coth

Is it better if you leave the wax on for a long while?

Michael Zak is correct....put polish on the cloth buffer to apply to the paint, then buff off (I do this by hand with a micro-fiber cloth) I then buff the polish with a difference cloth ''If needed'' and then apply wax and buff off by hand....do this panel by panel. What I usually do then is hit it up very gently By HAND over the whole car with a fresh microfiber to ensure I didnt miss anything ;) Just a tip! If your really motivated you can put two coats of wax on your car. I use turtle wax btw

Tells us to micro fibre the car for any dust Then drags the lead all over the paint 🤣🤣🤣

Where did you get this wool pad from ?

What wax did you use pls????

I could not watch the whole clip I saw when the device wire whip the car...

incredible!

Now that's how you wax a car! Great video...

Should be noted to never wax in the sun and only on cool surfaces. Always wax in the shade on cooler days.

@danlc95

6 жыл бұрын

Z1LTCH - Unless you're a mobile detailer, and/or using products that can be used in the sun.

Im.nuts I have two of these buffers but I never new how to use them lol now I do ,

thx for ur answer, car looks nice. i also keep watching the video😁✌️✌️

Never run buffer with a dry pad no wax or polish. You will burn the paint, though the RPM's on your buffer looks slow.

The best wax

NEVER let touch power cord the car paint! NEVER!!!

6:25 For fuck's sake watch out the cord!!!

Just had to ask why you had the cord rubbing the side of car and kept yanking on it shouldn't it have been over the shoulder out of the way. Why didn't you pop the hood to protect the edges when you were tilting the polisher when it was to be flat to avoid burning @ 2200 rpm,

@opelpedia

8 жыл бұрын

+Kevin Perry On wool pads you never go above 1000 - 1200 depending on how accustomed to use this type of pad.

@danlc95

6 жыл бұрын

That's only really necessary with high speed rotary buffers. The tool he's using is a random orbit polisher. The random orbital is designed to mimic hand movement. Although, when you get into something like a variable speed Porter-Cable 7424xp, yeah, I've burned through edges with that thing on speed 6. He'd have to sit on that edge for a week, with an aggressive pad, and compound to achieve strike through.

thanks supper vidio

Is this a DA or a Rotary ?

Esta es una clara muestra de como NO encerar tu auto......jajaja

Maybe start with a car that doesn’t already have a pristine finish..😐

What doyou think about Road Made products?especially their solid wax? Thanks

@opelpedia

9 жыл бұрын

sevastian botoghina It's a Carnauba based product, this means that you won't have any problems with it. The price is ok so i would use it

Hi can you answer my question bro? After the shine from the wax or polish dry's will there inevitably be swirl marks? I've always Wanted to buff my car but I'm afraid it causes swirl marks

@opelpedia

9 жыл бұрын

Wax is not the same thing as polish! You get swirl marks from polishing your car and not holding the rotating head perpendicular to the paint and also using to high rpm on the polishing machine.

I bought one of those in auto zone never again now I own a dewalt cordless polisher

Can any one tell me this polisher name

what happens to the dried wax on the machine!!. i heard that wool pads are for compounding not even polishing. waxing off with wool pad screams swirls to me

@opelpedia

10 жыл бұрын

dried wax is removed with microfiber cloth and for the second part of your question swirls are obtain at higher rpm then the rpm that can be reached with a buffing machine like the one in the video. swirls are the result of bad technique plus rps and always make the difference between waxing and polishing

Thank you

Nice VID!

Is he in a landfill?

When water beads on your car you just have to pour water on it to dry it

you won't have any benefit, it will be just harder to buff off and get that perfect shine.

should ALWAYS keep that orbital polisher flat to the paints surface. I noticed several times you lited the unit up to polish on the front tip on the pad. This is very bad for paint , It creates a hotspot and can actualy damage the paint

This is how NOT to wax your car.

@johnbeer5242

5 жыл бұрын

tmrthiago why ?

@wesleykleveter5487

5 жыл бұрын

Because he's going over it so much he's pretty much burning off the cars factory clear coat

@wesleykleveter5487

5 жыл бұрын

A micro fiber towel suits it just fine

@TheOpinionSports

5 жыл бұрын

Wesley Kleveter he won't burn the clear coat unless he stays in one area too long.

@wesleykleveter5487

5 жыл бұрын

Okcboi ....hes buffing way to much ... with the wrong type of pad...hes burning his clear coat

Do I need to use a microfiber cloth to remove dust particles before waxing and polishing? I don't want to spend the cash, so would it be OK to use an old dish rag instead? Thanks for the tip on always using gloves, though, it makes all the difference I'm sure. BTW, don't pay attention to the haters bashing you for dragging the cord of your buffer on the paint; paint is harder than the plastic of the cord. It won't scratch. It's called science, duh!

@aznazguy

8 жыл бұрын

+Lars Dahl It's the dirt on the cord that's the problem.

@zeljkoharandi7067

8 жыл бұрын

+Lars Dahl u must be trolling :) If u can buy polish and wax, sure 5 €/$ for a microfibre wont hurt that much. But i guess you dont even know what polishing is meant to do, cant see how u can polish with no microfibre to wipe polish?

Village polish machine

Watched twice cause the music.

get a decent buffer for god sake...any decent random orbital

@Sounga74

6 жыл бұрын

rex dumont what you mean ?

@ButtHolePlugger5

6 жыл бұрын

Look up griots or rupes orbitals

This tittle should be "how dont waxing your car"

Good waxin good tips do not listen the Hater!

lol someone help this kid

what did you plug the polisher into? your in the middle ona the woods

@d_jeez9807

8 жыл бұрын

there's a building behind him. look at the reflection of the hood

A mi me quedan hologramas ,como evito eso ?

@opelpedia

6 жыл бұрын

no use grandes rotaciones en el pulidor

Hi bro, can I use the same machine for both polishing and waxing?

@chrisward7738

7 жыл бұрын

Ahmed Abdulla yes you can. But I would recommend different pads

@a7medi58

7 жыл бұрын

chris ward which pads do you recommend? Foam pads or microfiber?

@chrisward7738

7 жыл бұрын

Ahmed Abdulla personal experience a dual action polisher is a better overall option as it can do both easier and safer but I use the same as he does. A foam heading is my personal favorite and it doesn't get as hot. But if you wax with the wool like he is just move the thing around with applying minimum to no pressure because it can burn the paint.

I can guarantee you that paint is horribly swirled.

@craigmail6994

7 жыл бұрын

do you add pressure when you wax or just do it gently and soft

@DirtNassty

5 жыл бұрын

@@craigmail6994 nooo....always let the machine do the work! ...I know this an old ass comment but for future reference in case some one else has this same question! :)

nunca al sol!!!!

Title shoud be How not to be wax your car to perfevtion cowboy at he's best0

Right off the bat you blew it by removing the dust with a rag (microfiber or not). Get a California Duster dude.

@opelpedia

8 жыл бұрын

+Damon Hearne the paint from the car in the video is 7 years old if microfiber would produce scratches it would be visible by now.

@larrywatson30

8 жыл бұрын

that's what your wife said damon

@swingrobot2000

8 жыл бұрын

+Damon Hearne Also right of the bat he scratched his fender with the electric cord of the polisher

@opelpedia

8 жыл бұрын

+Johan Sving actually i didn't, sorry to disappoint you!

@rkgsd

7 жыл бұрын

Damon Hearne California Dusters aren't immune from scratching either if the right dirt is on them.

Can I just say what a reduction to seek out someone who really is aware of what theyre speaking about on the internet. You positively know how to convey a difficulty to mild and make it important. Extra people need to read this and perceive this facet of the story. I cant believe youre not more common since you positively have the gift.

starting back washing cars and time to go forward to building my own car wash business

waxing with wool pads? wool pads its for cutting wtf?! please dont make me cry :D swirlomatic ;)

@chrisward7738

7 жыл бұрын

Janusz z Sebixowa waxing with a wool pad isn't gonna do anything bad as long as you keep it moving and apply little pressure

what polisher have you got looks the same as mine where do you get pads for it?

@opelpedia

8 жыл бұрын

+Paige Harvey hello, its not a polisher, its a waxing machine with low rpm

@PaigeRidesBikes

8 жыл бұрын

+opelpedia I known it's a waxing vidoe :) you have a rotary polisher though :)

@opelpedia

8 жыл бұрын

+Paige Harvey its a Stern CP240A+

he did everything wrong...

@PaxHominibusBonaeVoluntatis

4 жыл бұрын

so why the surface is shining ? Where you can see any drawback ?

@josephturner3913

4 жыл бұрын

Pax Vobis way too much product rubbing cord all over surface of car

Merge sa-i faci un polish , la nivel de amator , cu acea masina ?

@opelpedia

7 жыл бұрын

nu, in nici un caz

terrible music

what is the name of track ?i love it

@opelpedia

8 жыл бұрын

+bhbcurd Hello, TeknoAXE - Technopop 7b Link: kzread.info/dash/bejne/nJVt0LadgdOnZ9Y.html

Surely it's not a good idea to wax the The window

Put buffer cord over shoulder

Never do circles, never

Super

Play at x 2

He goes to fast haha

i can bet you that paint is swirled in the sun, wool pads are made as a cutting pad for compound not for any sort of finishing. No need to use a machine to remove wax if you use good wax it should come off easily.

I am wondering if a lot of these guys showing how to buff a car are actually reading the product's instructions? Most of the buffing, rubbing compounds are recommended to be used in shaded areas, specifically, when doing dark colored cars. Suggestion, watch the youtube instructions HOWEVER, you need to read the instructions on the product that you are planning to use.

This is a joke right??? I'm waiting for someone to jump out of the background and say, now this is exactly what you don't do and this is not the buffer you would ever use. I didn't even know they sold those cheap buffers anymore but may K-Mart does the last time I seen one they were $19.95 And they are not capable of removing ANY imperfections from the paint.

@albertpacer3681

4 жыл бұрын

Its not meant to remove paint imperfections u ass clown its a wax job not a buff job,,Hes not cutting hes waxing idiot!

why put wax on then use a cutting wheel to buff it off, that pad is designed to cut the paint with polish, the wax is supposed to go on after to seal and protect the polishing stage, all this has done is mask the swirls & scratches with wax and then buffed with a machine instead of just using a cloth, strange technique, give it a couple of washes and it will look the same as before....

@johnbeer5242

5 жыл бұрын

Michael Zak so how would u do it? do tell do tell

@JoseMartinez-lm3ps

5 жыл бұрын

Cut and protect at the same time?

Too much product? Circular motion mmmm straight lines better?

Hey how ye what wax did u use please

Anyone know what kind of wax to use? New to this and now I know not to let the cord touch the car by the comments lol

@xSyberprox

3 жыл бұрын

I know your comment is old but here is a good one Meguiar's Ultimate Paste Wax

you use for too much wax, and you do not need to do small circles with paste wax.

@junitolopez3762

7 жыл бұрын

Allen Kennedy what do you recommend, instead of circles when applying paste. Thx u

@ricardosifuentes8746

6 жыл бұрын

Allen Kennedy this guy 😂😂

Waaaaay too much wax used. Also cable hanging lose and scratching up the already polished/waxed paint on the side of the car.