How To Vinyl Wrap a Sword | Tutorial

Тәжірибелік нұсқаулар және стиль

In this video, I'll show you how I added a unique look to this decorative display sword using ‪@VViViDVINYLS‬ Red Holographic Weave Chrome Vinyl Wrap. *The sword used in this project is merely a display / decorative sword. It is not "real" in the sense that it could be used in combat*
Get the vinyl used for this project at this affiliate link: amzn.to/3ITLCW1
Get the tools you need for any vinyl wrapping project; at these affiliate links:
REV Brand Heat Gun: amzn.to/2Hm955P
Vvivid Magnetic Squeegees (3-Pack): amzn.to/3E30uPl
3M Blue Squeegees: amzn.to/3mHuI0C
3M Gold Squeegees: amzn.to/3mNQeAO
Monkey Strips felt buffers: amzn.to/3v2feaQ
Banana Buffers: amzn.to/3stHH7H
Monkey Strips Squeegee Buffers: amzn.to/44hqFgz
Micro-squeegees: amzn.to/2Sofkbn
3M Finish Line series Knifeless Tape: amzn.to/32N6Ctd
3M Design Line series Knifeless Tape: amzn.to/3ckvGuW
Vvivid Utility Knife: amzn.to/35WVZ99
Olfa Stainless Steel Body Utility Knife: amzn.to/2RKAgsQ
NT Cutter A553 Yellow Plastic body knife: amzn.to/3alSUkh
NT Cutter 30 Degree Snap Off Blades for Utility Knives: amzn.to/3cfTiRf
Olfa 30 Degree Snap Off Blades for Utility Knives: amzn.to/3kM1Brd
Back Slitter / Body Guard Knife: amzn.to/3kiesmf
Vvivid Wrap Gloves: amzn.to/33KfBe2
Benzomatic Torch Head: amzn.to/3qxCfAJ
DeWalt 9’ mini magnetic tape measure: amzn.to/2P4pOyG
Stanley 12’ tape measure: amzn.to/2QB6jxY
Tool kit pouch: amzn.to/3mXj8yG
As always, thanks to all those vinyl wrap installers who teach and create with vinyl wrap, like CK Wraps, Samson Montoya, Paradox the Wrapper, Vinyl Vixen, The Wrap Institute, and many others!
**Disclaimer** The links provided above are Amazon affiliate links. If you purchase products using the links provided, I may receive a small commission, at no extra cost to you, from Amazon. These commission support the ongoing efforts of this channel.

Пікірлер: 7

  • @caligena
    @caligena2 ай бұрын

    i have no earthly idea how this ended up in my recommendations, but i'm sure glad it did

  • @ColorChangeCustoms

    @ColorChangeCustoms

    Ай бұрын

    Well thanks, and thanks for watching!

  • @jonathanr7520
    @jonathanr75202 ай бұрын

    Why would someone do this? Looks or safety or something?

  • @ColorChangeCustoms

    @ColorChangeCustoms

    2 ай бұрын

    Just for looks. It's a decorative sword only.

  • @jonathanr7520

    @jonathanr7520

    2 ай бұрын

    @@ColorChangeCustoms gotcha!

  • @joshingaround5857

    @joshingaround5857

    2 ай бұрын

    It could also deny oxidation from happening as there is no air for a chemical reaction to happen (given the vinyl provides an airtight seal)

  • @caligena

    @caligena

    2 ай бұрын

    @@joshingaround5857 that would only be true if it was vacuum sealed and sucked all the air out. where it was just manual pressed, i doubt it would stop rust long term, not that this needs it, since it's likely stainless steel

Келесі