Perfectly explained just what i was looking for, thank you

@ebikesussex

8 ай бұрын

Glad it helped!

Smashing, thanks, just bought a Haibike Trekking 5 and wondered how to reset the trip counter. Much appreciated.

@ebikesussex

6 ай бұрын

Glad it helped!

Thanks for the info, just purchased a Haibike Trekking 4 High 500. Have tried it out today and love it, found out a few of these things myself but found your video helpful 👍

@ebikesussex

Жыл бұрын

Thank you for your kind words! Hope you enjoy your purchase. :)

Thank you excellent clear and to the point

@ebikesussex

10 ай бұрын

You're welcome!

Great vid, thanks!

@ebikesussex

9 ай бұрын

Glad you liked it!

Thank you very much for the info

@ebikesussex

10 ай бұрын

No worries!

Hi, i have a Haibike and i don’t understand why i can’t use the Auto mode or the last EXPW function. Anything helps./ I did the same as you, maybe i need to remove the battery or do some diagnostics from the computer ? Thanks.

@ebikesussex

Жыл бұрын

Not all motors have the EXPW function or the walk mode or auto function. For example the junior size Yamaha models from Haibike and Lapierre. You should ask the store you purchased from to confirm the features your machine should have.

Hi there, I have recently brought 2 kids overvolt's with the pw-te motor they have this display, the walk button doesn't do anything and they can only get assist if they stand and pedal there hardest if they try to cruse along they only get to 5 mph if they ride my wife's trek rail with the bosch motor they can easily do 15mph any ideas? Is there bikes set up wrong?

@ebikesussex

Жыл бұрын

The junior e-bikes have no auto mode, no walk mode and are limited to 12.5mph instead of the normal 15.2mph. This is to be expected on a junior EBike and is not adjustable after market as I understand.

I’ve just bought a new display because my old 1 smashed can u just unplug the old 1 and plug the new 1 in or do u need to buy the cable aswell

@ebikesussex

Жыл бұрын

They come in a variety of lengths and should come with enough cable and a plug to go into the frame just behind the head tube. The bridging cable from the controls to the motor is normally separate and reused when the controls are replaced. It runs from The motor where it is plugged in up to the head tube area on the ebike. Here it is connected to the sideswitch controls.

I Have an haibike with motor pw-x3, can you explain me please how to use walk mode. I cannot understand the procedure because my english is so and so. Thank you for the video

@ebikesussex

Жыл бұрын

If it has this sideswitch control you just hold down the button with an image of someone walking with their bike. The bike will then push itself along. :)

Hi, ive got a hardseven 6 and yesterday was the first time ive used it in the dark. When i turned it on i couldn't see the screen because it wasnt lit up. I noticed on the video that that one isn't lit up either. Is there a way to turn the blue backlight on and off? Cheers

@ebikesussex

9 ай бұрын

Could be a fault with the led backlight. Best to take it to your local Haibike dealer with a copy of your original receipt if it’s under 2 years old.

How do I get display to show mph. I've tried pressing up and down at same time but it don't work? Thanks

@ebikesussex

Жыл бұрын

Okay, this is from memory so excuse me if I get it wrong: On the ODOMETER screen press and hold both the arrow up and arrow down buttons simultaneously. Try it pressing the buttons closer to the screen and you may find it easier. Once you have accessed the screen kmph will flash, you can then singularly press up or down to get it to change to mph and back to kmph. Once it is on the one you want press the power off button to save. Hope this helps!

Does this display have an internal watch type battery. The display on my bike is not working properly, dimly lit or doesn't turn on and I've seen where the Model B control has a watch battery but I can't find any reference for the Model A control.

@ebikesussex

8 ай бұрын

No it doesn’t have an internal battery, it could be the automatic backlight feature that is not working. Perhaps take the machine to be serviced at your local Yamaha Haibike specialist.

Hi my bike is in metric configuration can you tell me how to change it to imperial please? Thank you.. Paul

@ebikesussex

11 ай бұрын

On the ODO screen hold down the up and down arrow together and the screen will flash km or mph. Scroll to the one you want then press and hold down to save it. Switch off and back on again and it should now be sorted.

Can you use the usb port to charge things like iPhone or bike mount light?

@ebikesussex

4 ай бұрын

Great question! The port does not currently support charging/powering external devices. The Interface X, Display B & C do have this functionality.

Is there a means of checking stored fault codes?

@ebikesussex

Жыл бұрын

Only by a dealer using the diagnostics software as I understand it. The last three errors are saved on the motor.

Hi, is it possible to do a hard reset on these?

@ebikesussex

Жыл бұрын

No although there are instructions online for opening the built in diagnostic system to clear down error codes as I understand it. We use the Yamaha dealer software though to reset the ebike after multiple faults (as it will likely shut down or have limited power). You could remove the battery, refit it a few minutes later and see if that helps. I have seen some errors on Yamaha resolving from battery removal and refitting. Best to take to your nearest Yamaha ebike dealer if problem persists.

Is this Yamaha Side Switch Type A water resistant / waterproof ? I cant find info... do I need transparent cover or not ?

@ebikesussex

2 ай бұрын

It isn’t waterproof, it is water resistant and best to be able to ‘breath’ to let condensation evaporate, so I would avoid covering it.

How do you use the light button

@ebikesussex

Жыл бұрын

Only works when lights are wired to the motor using the dedicated light cable (hidden with the motor wiring loom cables). Press for on and press again for off.

How do I change the setting from kph to mph please.

@ebikesussex

4 ай бұрын

Okay, this is from memory so excuse me if I get it wrong: On the ODOMETER screen press and hold both the arrow up and arrow down buttons simultaneously. Try it pressing the buttons closer to the screen and you may find it easier. Once you have accessed the screen kmph will flash, you can then singularly press up or down to get it to change to mph and back to kmph. Once it is on the one you want press the power off button to save. Hope this helps!

Is there an app I can connect to the bike?

@ebikesussex

7 ай бұрын

No, this system is all built into the ebike so no third party apps capable of connecting as I understand it.

suddenly my bike the EXPW mode does not show. Does anyone know why?

@ebikesussex

Жыл бұрын

It could be a screen failure, you can test this at your local Yamaha ebike dealer using their diagnostic tool. If it isn’t the screen it may be software related and could require an update once again that is probably sortable with the diagnostic tool the dealer will have downloaded in conjunction with their special dealer key.

I have the screen flashing on trip mode how do i reset the computer

@ebikesussex

10 ай бұрын

Could be a software issue needing diagnostics at your local dealer.

Mine won’t turn off Anyone know the solution I am taking the battery off at the moment

@ebikesussex

4 ай бұрын

That sounds like you should take it to an authorised dealer to look at. You may find pressing the on/off button on the battery works.

Ah, so that's how I reset the trip counter on my bike, I do not have any manual or guide for the control so I didn't knwo.

@ebikesussex

Ай бұрын

Glad it helped!