Thank you very much for this video..you are the First person [that I've seen ]who actually SHOWS how to use the looper and explains it clearly ...I know it's not very complicated but you have helped a lot of people , including me .Cheers!

@ThePedalGuy

3 жыл бұрын

Thanks! I'm really glad it helped!

@pascalhauser

Жыл бұрын

Agreed! Was testing it at a music store but couldn't figure out where the looper was. A quick search brought me to your video and then I could test it. ;-)

I still haven't figured out my Helix looper, still working on looperboard, looper, I didn't know pod go had a looper. I've got alot to learn, that's why I'm here!

@ThePedalGuy

2 жыл бұрын

Good luck and keep going!

I got my PodGo when it first came out and I still love it. Thanks for the vid!

@ThePedalGuy

2 жыл бұрын

Glad you enjoy it!

You deserve more subscribers. Thank you for your demo!

@ThePedalGuy

2 жыл бұрын

I appreciate that!

Thank you!! Very straightfoward and helpfuil!

@ThePedalGuy

Жыл бұрын

Thanks

Fantastic video! Every time I thought, "But what about this?" you showed how to do it. thanks a bunch!

@ThePedalGuy

10 ай бұрын

Glad to help

This video was great within the first 30 seconds. Great work

@ThePedalGuy

Жыл бұрын

Thanks

Great explanation! I was shopping for a looper with a separate stop switch. That double tap nonsense is super annoying. Turns out my Go already has it!

@ThePedalGuy

2 жыл бұрын

Glad it helped!

Fantastic demo!!!!

@ThePedalGuy

2 жыл бұрын

Many thanks!

Straight to the point!! Great!! Thank you.

@ThePedalGuy

2 жыл бұрын

Thanks

Good demo thanks!

@ThePedalGuy

3 жыл бұрын

Glad you liked it.

Thank you this was great!

@ThePedalGuy

2 жыл бұрын

Thanks

Nice clear demo 👍🏻

@ThePedalGuy

Жыл бұрын

Thanks

Thanks man for this video. 5:37

Thanks for the clear demonstration. I think this is might be a bit inconvenient in a live situation as the looper is part of the signal chain digitally. Can you change patches while recording different layers on the looper? I am sure it can be done in stomp mode within a patch by switching on/off individual effects (as in stomp mode). I think Zoom G5n also has a similar setup for looper (kind of a dealbreaker for me) whilst Zoom G6 has a physical switch to activate the looper. I am actively considering this or Zoom G6 or Valeton GP200.

Mich appreciated! Thanks!

@ThePedalGuy

2 жыл бұрын

You bet!

Thank you!

That was awesome. I would even like more info about the looper. I just got the pod go and don’t really know how to use it. Can you do a video about what to hook it up to? Budget friendly options? I am looking at 2 catalysts for stereo as an option. It sounds killer in headphones. Hooked up to an amp, not so much.

Thx 😊…. I just got this … lots of bells 🔔 & whistles

@ThePedalGuy

2 жыл бұрын

Cool

THX !!!!Now I know we used looper POD go greetings

@ThePedalGuy

Жыл бұрын

Glad it helped

great video!!

@ThePedalGuy

Жыл бұрын

Thank you!!

Thanks a lot

@ThePedalGuy

Жыл бұрын

You bet

Just got the thing. Didn’t know it even had a looper! Lol! Just started trying to learn it. Haven’t updated or even plugged it into my computer yet. But my last pedal was the Headrush Pedalboard, was just to big! But just from the little while of messing with it from the pedal itself, the headrush was much easier! Oh coarse I’m technically retarded, and look forward to loosing more hair figuring this thing out! You’re videos are a great help! Best on KZread! Thank you!

@86lanzo

Жыл бұрын

You described my exact experience.....the headrush was nice but it was a tank..which made me not wanna take it anywhere

hi TPG thx for this, you instruct well :) - question: once you program the Looper, it is a matter of just clicking that one button and it starts? Can you demo how to pwr on your pedal, then quickly do a Loop? considering buying the L6Pgo but do not want Looper to be complicated...

clearly explained and to the point! thanks

@ThePedalGuy

2 жыл бұрын

Thanks

I love pedals. I love this video (thanks). And I also love your eyebrows; respect. One question ... can we get around the way the looper starts playing your recorded clip for a sec when you hold to clear it? Thanks!

@ThePedalGuy

3 жыл бұрын

Thanks for watching and the kind eyebrows 😉 That made me chuckle a bit. As far as I know, I don't see a way to do a "quiet clear" but I have to believe there's a way to do it.

@Heartsofworship88

2 жыл бұрын

Volume pedal to off?

Great demo as always. I have a POD GO wireless (2 days now) can you advise how to connect a digitrio+ to the POD GO directly into AMP. Thanks.

@ThePedalGuy

3 жыл бұрын

Thanks. It would be similar to this video. kzread.info/dash/bejne/qZ2Bu9urlMjRh5c.html Even though I use a HR in the video, the connections are essentially the same. Just use the Send/return of the POD Go with the TRIO and you’re all set.

Great video! Very helpful! Is it possible with the 6SW to change between snapshots without changing what was already recorded?

@ThePedalGuy

2 жыл бұрын

Thanks. Not that I’m aware of.

Thanks so much for this video. I'm an older player and never used loops. I love the POD Go but was clueless on how to use the loop effect so I haven't messed with them. I didn't even know what 1SW and 6SW meant LOL! I can't wait to mess around with them. Do you prefer the loop up front before the amp or in the effect loop or does it really matter? Thanks again!

@ThePedalGuy

3 жыл бұрын

Thanks and I'm glad you got something out of the vid! I would put the looper at the end of the signal chain, as it will capture any FX or Amps in your preset. It's really up to you, but traditionally I place a looper towards the end of the signal chain. Have fun!

@Stratman5150

3 жыл бұрын

@@ThePedalGuy Thanks! Another way I’m currently using my Pod Go live is just for effects such as chorus, flanger and delay through my 5150 head effects loop. It replaced my stand along effects boxes and tuner. Such an easy device to use I figured what the heck. Sounds just as good as what I was using before.

@fabianvasquezjr8852

2 жыл бұрын

@@ThePedalGuy hey pedal guy, hoping Headrush will come out with updates on looperboard, still having trouble figuring it out. Will be looking forward to your vids whenever that's released.

@ThePedalGuy

2 жыл бұрын

@@fabianvasquezjr8852 me too. They took such a large step forward with the last firmware update for the looperboard. They need to keep building on that.

Hey MR Pedal Guy - When using the loopers you turn off various levels of the looper for example when the song changes? Thanks Patrick

great, but how do you then get back from the 6 sw looper to the stomp switches you started with?!!

This was very helpful. Thank you. Question: I did not see how you were able to place the looper on the top right switch. Can you explain that please?

@ThePedalGuy

Жыл бұрын

Sorry I haven’t touched the POD Go in well over a year at this point so I don’t remember.

Thank you so much for this demo. I actually just ordered the Line 6 DL4 mk2 Delay Looper today. I’m wondering if I should cancel that order and buy a pod go instead. I’ve got some thinking to do.

@ThePedalGuy

Жыл бұрын

Thanks

@juddrizzo

Жыл бұрын

@@ThePedalGuy I research the crap out of everything last night. I’m happy with my decision to get the New DL4 and stick with my tube amp and a few pedals. I’ve been playing a lot in the last couple days and it just sounds and feels amazing. Thank you. 😃

@ThePedalGuy

Жыл бұрын

@@juddrizzo Sounds good

How do you erase the loop in 6 switch mode?

When (and where in the chain) would you use the mono looper vs stereo? Many solo gigs I do are just one speaker on a stand so to use the stereo outputs and effects would be redundant, right? Everything just gets summed to mono via the mono output on the podGO

Hi! Thanks for your video! I was wondering: did you have an issue with the looper playback volume? The looper playback volume is very low compared to the actual playing. I switched from a full pedalboard with a seperate looper pedal and never had this issue. The playback volume is already at max... seems the POD really cuts down the looper output . It doesn't seem to affect you in your video. Many thanks.

thank you very much for the video. i have problem which is i cannot change tones in a loop. if changed the loop it wiill loop with what i change last. EX: if i record a loop with a clean tone and i want to add a distortion lead part to the loop after i changed to the distortion that loop is looping with distortion tone . not with clean tone if u can help it give me a help

Hey Thanks for that, I am awaiting on my line 6 arriving, however feel you went very quick as I a a bit slow understanding this .......

@ThePedalGuy

2 жыл бұрын

Glad it helped

Thank you for this videos , i need to know how to switch between presets while the looper is play ??? I tried but stops

@ThePedalGuy

3 жыл бұрын

Unfortunately, it doesn't do that. The looper is tied specifically to the selected POD Preset.

@calenexum

2 жыл бұрын

You could probably use snapshots for this. Not 100% sure though.

How do you may it to the bottom left? Top left I keep accidentally hitting the bottom left button

Nice video, very informative. One question : Is there a way to have a click track sound while you record a line? I find it quite hard to time the end of the loop so it will repeat seamlessly.

@ThePedalGuy

6 ай бұрын

Not that I recall. Looping in time does take practice

@RobBaartwijk

6 ай бұрын

@@ThePedalGuy Ok clear, thanks. It's just that I use the Pod as it sits on my desk so working with my feet to punch in and out is impossible that way. Not flexible enough for that! :)

Can you set multiple footswitches as 1 button loopers to have multiple banks to turn on and off like a Boss RC-300?

@ThePedalGuy

3 жыл бұрын

I believe so as long as you’re using the multifunction looper and not the one switch looper

Hi thank you i have a question- how do i loop with different sounds- like i wanna switch the sound when playing something else

@ThePedalGuy

Жыл бұрын

Not possible

how many layers of overdubs can you do?

ya thanks a lot.....but is it possible to change or go to another patch and bank while the loop is still going?

@ThePedalGuy

3 жыл бұрын

Nope. The looper doesn’t run independently from the presets.

Hy, thanks for the video. Does the Pod Go looper can be synchronize by midi clock with for example a BeatBuddy pedal ?

@ThePedalGuy

Жыл бұрын

I don’t think so

So can i put for example the looper in the b position l? And use the other 5 for other effects, like for example I've recorded something clean after the loop, i want to put a bass line over it and then switch to distortion is that possible? Thanks in advance for answering my question.

@ThePedalGuy

Жыл бұрын

Not sure. It's been awhile since I last used the POD Go Looper.

Once a loop has been recorded, can the live sound be changed? IE: Play and clean guitar loop, then add overdrive to solo.

@ThePedalGuy

2 жыл бұрын

It should work if you place the looper at the end of the signal chain, record the clean loop, and then activate your overdrive. That should do it

Hi...love your super clear videos on PodGo! I'm having trouble with one aspect of my PodGo, and that's how to assign the Wah to the expression pedal. I've watched a few how-to videos that breezed over it too quickly and I couldn't get it. For instance, Some talk about a toe switch. Do they mean if you push the toe side all the way down, there's a switch? If so, I can't find one. Would you consider doing a quick video about how to assign the wah (and other expressions) to the pedal? Thanks for you work on these!

@ThePedalGuy

2 жыл бұрын

Thanks for the suggestion. I don't have any more Line 6 content planned at this time.

@metoz1954

Жыл бұрын

Hello, just press the expression pedal on the top, it won’t brake, then it is switched to WAH

Using the podgo looper can you save a particular loop in a particular presets or is the current loop you created wiped clean when you change presets -I’m thinking save song back track loop with The song loop I want there.and name it.?

How about if I wanted to use an external 2 switch footswitch? 🤔 Could I could connect it to the exp jack (footswitch 7/8)?

@ThePedalGuy

Жыл бұрын

No idea. I would double check with line 6

I can get the looper going but I can’t figure out how to change sounds with the loop still playing. Anyone know? I know it says to assign the same loop to the other sounds you want to use but when I switch sounds the recording loop switches sounds too! Ugh! HELP

@ThePedalGuy

Жыл бұрын

You can’t changes presets while the looper is playing back. It doesn’t run independently of the patches.

hi thx for the video, I have issues adjusting the usb sound level (you tube backing tracks) with the guitare level, do you have a clue on how to get the same sound level of the two please ?

@ThePedalGuy

Жыл бұрын

Sorry no idea

@gyroplane

Жыл бұрын

@@ThePedalGuy No problem TPG, I fear it is a RFM CASE (read the F... manual )

My foot switch doesn’t change color like that. Anybody know why?

hi Pedal guy ...r the sounds and effect only from pod go ?

@ThePedalGuy

3 жыл бұрын

Everything you hear in this vid came from the POD Go.

When I record something on my looper there’s a pause at the end. It doesn’t constantly loop. It starts then stops then starts again. Any tips??

@ThePedalGuy

3 жыл бұрын

Sounds like a possible timing issue. Just takes practice. Also make sure you have the latest firmware.

Hi! Thanks for the video :) just bought my POD GO. Is it possible to setup the looper no matter what effect (from bank storage) I use? Eg. I use 12A effect with looper and I would like to change to 20B. Do I have to setup looper for each one ?

@ThePedalGuy

3 жыл бұрын

It doesn’t appear that it works like that. You would need to set up a looper per preset.

3 жыл бұрын

@@ThePedalGuy I thought so :( thanks!

@ThePedalGuy

3 жыл бұрын

@ sure thing

@g-man7687

2 жыл бұрын

I believe you can hook up an external looper through the effects loop and do what you were talking about

@larryrola152

Жыл бұрын

Just got the go and wandered here for looping lesson. I was able to have the sound I want looped on snapshot 1 of a preset. Then I changed the sound of snapshot 1 on snapshot 3 which is what I wanted to play over the loop. You have to keep the same effects blocks for all 4 snapshots, but you can save different settings and which effects are on and off. I was able to loop the clean intro to Run to you and play the delayed lead with distortion over it.

I followed every step of the video, and it loads the looper in the chain, but looper will not come on, and doesn’t light up the button? I know how to turn on and off the effects in the chain, but the looper no matter where I put it in the chain, or if it’s in factory or user won’t come on. Anyone here have any idea why? Thank you!

Can you change snapshots while using the looper?

@ThePedalGuy

Жыл бұрын

That should work

Can you use different patches while using the looper ?

@ThePedalGuy

Жыл бұрын

Nope.

When you started the Looper Demonstration, and you played like a Rhythm Chords. Can I get your Block Sound Settings for that? at 2:45 Thanks!

@ThePedalGuy

Ай бұрын

Not sure what you mean here. I just used a stock preset on the unit so I didn’t do anything else really. Just used it to show how the looper works. Hope that helps.

how to connect the beat buddy to line 6 pod go? enjoyed the beat buddy bought from you. can you make a video ? thanks

@ThePedalGuy

2 жыл бұрын

Thanks for the question. It's actually very easy. The outputs of the POD Go will go to the inputs of the BeatBuddy and then from the BeatBuddy to your amp or mixer. The BeatBuddy passes audio through it, so it doesn't alter the POD Go sound. Hope that helps.

@alexwu8592

2 жыл бұрын

@@ThePedalGuy I had the beat buddy setup with Pod go working like you said and it’s working great. But is there a way for the looper to pickup beat buddy’s sound?

@ThePedalGuy

2 жыл бұрын

@@alexwu8592 use a send/return in the pod go with the BeatBuddy. Make sure it comes before the looper in the pod go signal chain and that should work

Can i over lay more than 2 sounds on the loop?

@ThePedalGuy

2 жыл бұрын

Not sure as the looper doesn’t run independently of the patch

6 switch looper question: how do I clear the loops I have recorded out so I can start something new?

@ThePedalGuy

2 жыл бұрын

Sorry for the late reply. When you create an instance of the Looper there should be a clear button when you access the Looper from the POD.

@g-man7687

2 жыл бұрын

????

@luckyones3060

Жыл бұрын

Hold stop/play and record buttons down together to delete loops for 6sw

does it store loops?

@ThePedalGuy

3 жыл бұрын

Hi. No it doesn’t store the loops.

Hi do you ever get problems with not loading up aounds or anything when playing live with standard sized power supplies on guitar multi effects pedals ?

@ThePedalGuy

2 жыл бұрын

Sorry not sure what you mean

@darrenmitchell1744

2 жыл бұрын

@@ThePedalGuy I have a nux mg 300 and sometimes when I go to perform live amd switch the power on, the preset sounds/patches dont perform correctly, some say it could be a power supply problem ?

can you store loops

@ThePedalGuy

2 жыл бұрын

Not that I'm aware of.

Holy crap! I did not even know the thing had a looper. I didnt hear anything about quantization. Not a feature of the pedal?

@ThePedalGuy

2 жыл бұрын

Not sure about quantization

Salve come si fa per fare ritornare i Cab nella versione nuova

Can you tweak your presets while playing something you recorded into the looper?

@ThePedalGuy

Жыл бұрын

You can tweak within the preset but you can’t switch to another preset.

@adriandavidpayne

Жыл бұрын

@@ThePedalGuy Thanks. That's good information to know. Might just be a deal breaker for me.

@adriandavidpayne

Жыл бұрын

@@ThePedalGuy Well I bought it anyway. Didn't know that changing presets deletes the loop. I do now :)

Can you make the looper another switch

@ThePedalGuy

2 жыл бұрын

I believe you can assign it to another switch, but I would check the manual first. It's been awhile.

How do you use the looper with already made presets and all spots are full on that preset?

@ThePedalGuy

2 жыл бұрын

You need to ditch one of the fx in your signal chain to create an instance of the looper of the signal chain is full.

@jeffskyberg5615

2 жыл бұрын

@@ThePedalGuy Thanks, how do you delete all dubs from the 6 switch setting? If you exit out does that clear everything you recorded?

Whilst of course it's good that the Pod Go has a looper, there are some issues. Firstly, it's recording time is very limited and the functionality makes it quite difficult to time things accurately - whilst arguably that's a practice thing, some loopers do give you a countdown timer that makes things a little easier. Secondly, it's not a global feature but is patch specific which is a bit of a shame. This means it's taking up one of your 4 FX user slots, and unless you change to a patch that has the looper set exactly the same, your loop will stop when you switch patches. It really isn't therefore as functional as it could be and its almost as if Line 6 added the looper in as an 'afterthought' just so they could say Pod Go has a looper. However, re the using up of a user FX slot, there are available on KZread and various Pod Go groups variations to the .pgp patch file (script is written in JSON) that can give you extra slots if you're prepared to sacrifice other slots eg FX loop, EQ etc but only in that patch. I have a 6 slot version that I can use with up to 5 fx plus a looper and that adds a lot more flexibility. (*This is NOT a firmware hack which is very unwise & dangerous, but just changes the JSON script in a single patch file and which doesn't affect any other patches or Pod Go functionality or create any risk to Pod Go - Line 6 are fully aware of these btw!).

@ThePedalGuy

2 жыл бұрын

Thanks for sharing.

Any recommendations for a looper pedal to connect it with? 😂

@ThePedalGuy

9 ай бұрын

The NUX Loop Core Stereo comes to mind ;-)

Is it possible to increase the recording time of the loop?

@ThePedalGuy

2 жыл бұрын

No it’s set

@richardbirch5744

2 жыл бұрын

@@ThePedalGuy But you will get double the loop length with Mono (40 secs Mono, 20 secs stereo). These can be doubled with 'half speed' but I'm not sure why you'd want to loop at half speed?

So, is Valeton gp-200 kill pod go?! Interesting thing))

@ThePedalGuy

2 жыл бұрын

We'll have to see

how can i delate a track from the loop ?

@ThePedalGuy

10 ай бұрын

As I recall it’s a press and hold while the looper isn’t playing back

@Marco-eh5wu

10 ай бұрын

i ll try...many thanks

My issue with the looper is I'll be recording (10 seconds) and then it'll auto go to playback without me doing anything. Anyone know how to resolve?

@ThePedalGuy

2 жыл бұрын

That's a head scratcher for sure.

@gary1488

2 жыл бұрын

@@ThePedalGuy figured it out. 20 seconds only on stereo. 40 for mono.

I wish you would have started from the very beginning. How did you get all of those knobs lit up in the beginning? I only have one lit and your steps aren't giving me the same results. Ignore my ignorance and help if possible. Thank you.

@ThePedalGuy

2 жыл бұрын

Oh wait. I keep confusing this with the mg30. I will try to cover this again at some point but there’s a lot on the schedule at the moment.

@ricksanchezito8972

2 жыл бұрын

@@ThePedalGuy I have time lol thanks for replying. Subbed

Hi and thanks for this video! Do you know how to delete the loop with the 6 switch looper? With the 1 sw looper we delete by holding down the foot switch while it's in white and the loop gets ereased so we can start again... but I haven't figures out how to do this with the 6 switch looper! Also, just to mention, one is able to undo with the 1 sw looper by holding down the foot switch while it's in green :) Thanks again!

I was trying to Loop hotel California chord progression but its not taking the full part the loop restarts in the middle. How do I fix it ?

@ThePedalGuy

Жыл бұрын

Not sure how to advise here. Sounds like you may be running out of time on the looper which would explain why it won’t play the entire loop back

@kevincasals2008

Жыл бұрын

@@ThePedalGuy how do I extend the time of looping

@kevincasals2008

Жыл бұрын

@@ThePedalGuy i mean it doesn't let me finish the recording

@thereclinerpilots3961

Жыл бұрын

@@kevincasals2008 If you're using the stereo looper, I do know that the mono looper gives you twice as much recording time as the stereo looper. I think it's 40 seconds

Can't get it to map to upper left 🤔

@ThePedalGuy

2 жыл бұрын

I would ping the line6 POD Go FB group for additional help.

This video was very confusing to me. It does not put anything on the far left that is labled as Banks which is like your different petals you choose. I was able to create a looper preset but was kind of yucky as I would lose all my sound effects when switches to the looper. I just bought this yesterday so dont know alot about it.

@ThePedalGuy

Жыл бұрын

That’s the only issue I’ve found with the looper on the POD GO. Once you record the initial loop, you can’t choose a different preset.

My problem with the line 6 is, when i record a loop and it's playing back the sound is just awefull. Like you are listening to a MP3 you downloaded in 96kbs. When i play my guitar over the loop it sounds amazing again, it is just the loop that has crappy sound.

@ThePedalGuy

2 жыл бұрын

Thanks for sharing

mine doesnt do this at all. this is so frustrating!

@ThePedalGuy

3 жыл бұрын

Not quite sure what you mean here.

@jeffv3647

3 жыл бұрын

@@ThePedalGuy It doesn’t come up the same way. Not sure why. I’ve tried it on Factory and user settings, then hit the mode switch. Not sure what’s going on. Most of them don’t even have a looper to use in the settings. Do you have to go into each pedal setting and add a looper first? So not easy to use at all

@ThePedalGuy

3 жыл бұрын

Sorry to hear. The looper is set up with every individual preset. So you’ll need to create an new instance of the looper. Unfortunately it’s not like the head rush looper which runs independently of the presets.

RAD

@ThePedalGuy

2 жыл бұрын

Thanks

Those are such useless commands for a 6 switch looper. Should be able to queue different layers and just have more options overall

@ThePedalGuy

2 жыл бұрын

Thanks for sharing