Drew, just for fun you should do a demonstration of auto mixer with several tracks of singing vocals to show how it would sound.

@ryan.wakefield

4 ай бұрын

I 100% agree with this comment.

Very thoughtful. Thank you Drew

A video detailing this feature on the Wing would be helpful for some as well!

Great, thanks for the work

Thanks drew once again

Solid video Drew.

Great to see X32 video again. I have started thinking that you sold it and switched to Flow 8 😁

Great tutorial Drew... Another thing to do is you could use the "gate range" funtion as you can set the threshold and the range tells the gate how much of the level to turn down by ...ie: -9dB. Works a treat, and on any channel too. 😊

Would love to see you go over this for the Behringer Wing

thanks for info:) great job all the time! br from Austria :)

i was hoping if you could make a video on how to record live stream vocals and instruments in the computer using Cubase 5 Software and putting it back to the mixer to play it again and again.

that's seems what i looked for in x-32, i found that feature in bose processors, called gain-sharing amm control. that can be very useful in confrences

This is like Alex on Autos but for AV gear. Awesome job.

@williamrgrant

11 ай бұрын

Good comparison!

Awesome can you please explain levels,mic types,eq,compression and other settings as this auto mix applies. Thanks in advance.

It sounds like a combination of a gate + side chain compression

God bless you Sir! And it been a while this is John paul

Hi Drew. I love your tutorials. I have a church that is a very lively space with an ambo mic, cantor mic and a wireless mic for the pastor. I can see the benefit for automix for those three mics. But how would I isolate those mics from the vocal mics on channels 9-16? The audio from vocal mics get into two of the first three mics, via room reflection. The mixer is usually unattended is the reason for the question.

спасибо

Can you do a video on using it on live vocal just curious

My table surprised me recently. After updating the software, on one of the next units, it turned up the volume on its own. It was channel 38 linked to 37, and it was not a router hack, because of the two linked ones, only one fader went up. Could this be "Revolt of the Machines"? ;) - google translate from polish...

So you still set the levels on the faders, and this sorta "ducks" the other mics if they aren't being used?

sir its possible to use channel 9 to 16 for auto mix and can you explain it how to do it thanks for your response

Hi Drew I have a question why is it that only the first 8 channels only have the automix and not all of the channels on the X32?

Can you use the automixer for a live streaming event straight to your online bus ?

Instead of changing the weighting level, can you achieve the same result by adjusting the channel fader level instead?

Can this be activated or deactivated in a snippet?

Does the automix do anything more than just gating the channels?

I’m assuming this works with soft patching correct?

Kind of a 'side-chain' compression???

wouldn't using Gates do the same thing? (besides the priority). Would be nice to hear a comparison. Great videos as always :)

@williamrgrant

11 ай бұрын

Difference is multiple channels could activate their gates at the same time, and once the threshold level is set, it stays static. Automix is dynamically muting the "less loud" channels no matter the absolute volume level. It ensures only one channel is active. Perfect for spoken word situations.

@jeremyoswin9535

10 ай бұрын

It’s possible that in some situations using only noise gates would be preferred. Such as if 2 hosts are intentionally speaking at the same time (or singing, or quickly bantering back and forth and into each other’s phrases). I look forward to trying the auto mix feature in this scenario to hear how it behaves. Thank you for this helpful tutorial!

Let's say you had mics on 25-32 like your example. Could you just change the input routing via user settings or do you have to physically change the inputs to 1- 8?

@joelromero2949

Жыл бұрын

Wondering the same

@johnschalk1271

Жыл бұрын

Automix is only available on the first 8 channels on the console. You an use the routing menus so send any input you want into, for example channel 1, but you can't "move" the automix feature to channels 25-32. Does that make sense? In this video I think Drew has card inputs feeding the first 3 channels. Also, you can see that there's nothing plugged into the local XLR inputs on the back of the console in his video. And yeah, the first time I went to use this feature I had to move all of my wireless headset mics from channels 9 - 16 to 1 - 8 :)

Hi Drew, We have a multi-lingual church. We normally have a Speaker, an interpreter and a bible reader on the platform. Can the Automixer be used in this scenario please?

Multi-eople 😸😸

I don't understand WHY Behringer only has this feature on the first 8 channels. Very Frustrating.

Thanks for the info. This could have been a 2 minute video if you didn't repeat yourself so much. Also, it would have been nice if you would have said what the auto mixer actually does at the beginning of the video. I'll try it out though.