discord.gg/NVR9JnwTHc I made a Discord Server. If you have some troubles, I help you.

awesome video! But i have a question. Do you know how i can enable the lights off the buttons form the apc mini?

@ylp001

2 жыл бұрын

You have to use lua backend. You can get some help from here. github.com/cbdevnet/midimonster/blob/master/backends/lua.md

안녕하세요. 우연찮게 영상보고 따라해보고 있는데 1분 38초까진 따라해서 왔는데 그 뒷부분 이해가 안되서 질문드립니다. Xtouch부분을 지우고 apcmini부분만 똑같이쓰고 ip주소만 맞춰주면 되는건지 알고 싶습니다.

@ylp001

3 жыл бұрын

네 맞습니다. 그리고 맵핑에 관련되서는 아래의 링크를 참고하시면 도움이 될꺼에요. github.com/cbdevnet/midimonster

hello i couldn't do it for akai apc 20 can you please do it for me

How do I create lua back end. Can you help with configuration and mapping. I'm very much aware of the sACN and Winmidi configuration. Thanks

@ylp001

3 жыл бұрын

You have to install lua and then study these links. github.com/cbdevnet/midimonster/blob/master/backends/lua.md github.com/cbdevnet/midimonster/blob/master/configs/lua.cfg github.com/cbdevnet/midimonster/blob/master/configs/demo.lua

@sherifyekini3152

3 жыл бұрын

@@ylp001 thank you for your reply.

Hi! Thanks a lot, what a job! Unfortunately i stuck Somehow I can’t find notes and cc of my controller I have Arturia minilab3 There’s and knobs and faders and pads… But I didn’t find anything May be you know where I can find these?

@ylp001

Жыл бұрын

If you succeed to run midimonster, you can find their notes. You push pads or move faders , midimonster show the notes.

Buenas ,se puede hacer con una Behringer BCF2000?¿ lo he intentando y no lo logro alguien puede ayudar? gracias Hi, can it be done with a Behringer BCF2000? I have tried and I can not do it, can someone help? thanks

@ylp001

3 жыл бұрын

I don't have BCF2000 but midimonster will work with it cause I checked it with many midi devices. Check BCF2000 manual and find midi notes which it make. Then you match them to sACN signals. If you don't understand, read github.com/cbdevnet/midimonster.

Does it work with the avolites T1? Because the manuel tells me they disabled triggers

@ylp001

Жыл бұрын

it works. As far as I know, T1 can do triggers like sacn and dmx trigger.

@ylp001

Жыл бұрын

And can you show me the manual that disabled triggers.

@jelmerroskam156

Жыл бұрын

Its on the website. No external control or triggering

@ylp001

Жыл бұрын

@@jelmerroskam156 T1 can do DMX and sacn trigger not midi trigger. And you can use external midi devices with T1 using midimonster which translate sacn signal to midi signal.

Hi, I'm having some problemis with titan. I managed to do the mapping because with an SacnViewer I recieve values, and if with this program I send Sacn values, I can trigger the titan. But with the midi controller, Titan does not read anything. Do you have some idea of what may happen? Thanks for all the videos

@ylp001

Жыл бұрын

That's why I use midimonster. midimonster can receive midi signals, change them to sACN signal and send them to Titan. The SacnViewer can send and receive sAcn signals BUT can't change them to midi signal. That's why your midi controller can't trigger anything.

@pauetfpv

Жыл бұрын

@@ylp001 what is happening is that Titan dones not recieve (or only sometimes) the Sacn values from Midimonster. But if I generate some values manually, it works.

@ylp001

Жыл бұрын

​@@pauetfpv If midimonster send a sACN values to Titan which is trigering a playback is fading, Titan doesn't receive it. I found this recently. Before I found this, I thought that midimonster lost some sACN signals and it has some problems. But it's not!! It's just Titan can't receive it. midimonster is very solid.

@jackwright1649

Жыл бұрын

@@ylp001 Have avolites block sacn support? my midi monster is registering input ok, just not registering on avolites titan one

@ylp001

Жыл бұрын

@@jackwright1649 No, you got something wrong in your midi monster config file. Or maybe network problems.

How to bind triggers on wheels?

@ylp001

Ай бұрын

You can trigger mouse's wheel to Titan wheels using midimonster.

How to map akai apc key 25 notes to sacn?

@ylp001

3 жыл бұрын

1:50 apcmini.ch0.note25 > sacn_apcmini.25

@ethanleung1021

3 жыл бұрын

@@ylp001 my controller is not apcmini,it is apc key 25.how to map?

@ylp001

3 жыл бұрын

@@ethanleung1021 I can't find apc key 25's channel and midi notes in the manual. I don't have the controller, so I can't find myself the channel and midi notes which apc key 25 produce. If you can find which channel and midi note all the buttons and knobs make, put the channel and midi note in midimonster.cfg. Most of all, just follow the clip that is all, I don't think you can find the easier way to use midimonster than this clip.

@ethanleung1021

3 жыл бұрын

@@ylp001 Thank you very much

Hello there . I downloaded midimonster everything ok . I am using nanoControl2. titan one v11.4 not connecting . but when I start midimonster.exe I can see that the controls are working. titan one acn de universe and ip address is not coming. Can you help

@ylp001

Жыл бұрын

Close, restart Titan One and try midimonster again. Be sure that right ip address and right midi channel.

@toelproduction2617

Жыл бұрын

@@ylp001 is there anything else to do from the titan one dmx settings? Can you share your settings and midimonster folder with me?

@toelproduction2617

Жыл бұрын

@@ylp001 Is there a way I can send you a screen video or picture? I have a big job to handle please

@ylp001

Жыл бұрын

@@toelproduction2617 kimwida002@gmail.com

@toelproduction2617

Жыл бұрын

@@ylp001 I shared it with you by e-mail. Thank you very much in advance.🖐

dude you're awesome. i didn't find how to map de nanoKONTROL2 of Korg (i have the manual but de midi monster don't acept the values) if u can help me i'm grateful, thank you so much for this video, here in Argentina pay 99 euros for the license of osimidi it's a lot of money :(

@ylp001

2 жыл бұрын

You need to know what midi signals nanoKontrol2 make. Change your device id and ip address in "midimonster.cfg". Finally mapping.

@_zaudio_

2 жыл бұрын

Do you still need help with the file for the nanoKONTROL2? i can give you the working one:)

@fernandofasano5037

2 жыл бұрын

Ty all, i fixed it for my own. Thanks to your video i can still working better with my bands clients in Argentina. I bought a akai apc mini. Again, thank u all.

@litodeejay

2 жыл бұрын

@@_zaudio_ hi, i need nanoKONTROL2 file... is it possible to share it please, thanks, greetings

@_zaudio_

2 жыл бұрын

@@litodeejay [backend sacn] bind = IP-adres [sacn sacn_nanoKONTROL2] universe = 8 priority = 101 destination = IP-adres [backend winmidi] list = on detect = on [winmidi nanoKONTROL2] read= nanoKONTROL2 [map] nanoKONTROL2.ch0.note{0..99} > sacn_nanoKONTROL2.{1..100} nanoKONTROL2.ch0.cc{0..99} > sacn_nanoKONTROL2.{1..100}