How to Use Magnetic Sensor and Reed Switch in projects
Ғылым және технология
How to Use Magnetic Sensors and Reed Switch in projects
A magnetic field from an electromagnet or a permanent magnet will cause the reeds to attract each other, thus completing an electrical circuit. The spring force of the reeds causes them to separate, and open the circuit when the magnetic field ceases.
Timestamps
00:00 - 1. Introduction & Demo
00:24 - 2. About Magnetic Sensor & Reed Switch
01:40 - 3. Reed Switch Testing
02:50 - 4. Magnetic Sensor Testing
03:23 - 5. Experiment on LED using Magnetic Sensor
05:27 - 6. On Paper Explanation for Magnetic Sensor
In-Depth study:
circuitsbazaar.com/how-to-use...
A reed switch is an electromagnetic switch used to control the flow of electricity in a circuit. They are made from two or more ferrous reeds encased within a small glass tube-like envelope, which become magnetised and move together or separate when a magnetic field is moved towards the switch. Reed switch was invented in 1922 and later used adequately in 1936 by Walter B. Ellwood in the reed relay. A reed magnetic sensor is a sensor that uses a reed switch to detect a magnetic field. A reed switch is a switch that is activated by a magnetic field. The switch consists of a pair of ferromagnetic metal reeds that are hermetically sealed in a glass envelope. The reeds are arranged so that they are normally open (non-conducting). When a magnetic field is applied, the reeds align and the switch closes (conducting). Reed magnetic sensors are used in various applications, including security systems, door and window sensors, and automotive sensors.
Magnetic Sensor / Reed Switch :
amzn.to/3yyyQ9M
amzn.to/3uLNOs5
-----------------------------------------------------------------------------
"Circuits Bazaar" Social Media Link
/ realjsrana
- / circuitsbazaar
- / circuits_bazaar
- / circuitsbaz. .
Circuits Bazaar provides basics and advance level learning of Electrical and Electronics Engineering through Projects and Tutorials. you can ask a question about your problems, request for a video.
----------------------------------------------------------------------------
Music by: / ikson
#Magnetic_Reed_Switch_Sensor #Reed_Switch #Sensor
Пікірлер: 72
very helpful, many thanks.
@The.Innovative.Indian
2 жыл бұрын
Thanks for appreciating brother
Awesome tutorial... 👌👌👌👌
@The.Innovative.Indian
Жыл бұрын
Thanks
Awesome! Sir ❤🙏❤🙏
@The.Innovative.Indian
Жыл бұрын
Thanks
Amazing video bhaiya😊👌🏾
@The.Innovative.Indian
4 жыл бұрын
Thank you so much for the appreciation
Good Effort
@The.Innovative.Indian
3 жыл бұрын
Thanks for appreciating
Excellent explain bro..
@The.Innovative.Indian
Жыл бұрын
Thanks
Nice video! How would you do if you want to reverse the effect? How do you have the light/sound stay on until you put the magnet close to the sensor?
@The.Innovative.Indian
4 жыл бұрын
in that case please feed the data of the reed switch to micro controller and driver the light or sound through microcontroller . now here you can generate any signal through microcontroller
@FarmerFpv
4 жыл бұрын
An easier way is to use an always closed reed switch so when you remove the magnet the light will turn on. No need for a microcontroller, that's just complicating a simple solution.
@pubgprobot1091
2 жыл бұрын
@@FarmerFpv bro can you please share a link of a closed Reed switch as I need to turn on light when magnets are not in contact (for car door) but i am not understanding which one to choose so please share a link from Amazon
@pubgprobot1091
2 жыл бұрын
@@The.Innovative.Indian bro can you please share a link of a closed Reed switch as I need to turn on light when magnets are not in contact (for car door) but i am not understanding which one to choose so please share a link from Amazon
nice demo
@The.Innovative.Indian
Жыл бұрын
Thanks
Good atempt
@The.Innovative.Indian
Жыл бұрын
Thanks for appreciating
I have treadmill but it was fixed magnetic reed switch beside the motor.but on board have connection for 3 wires not for two. How I can connect reed switch
@The.Innovative.Indian
3 жыл бұрын
One wire is of earthing
It is awesome bro ❤️
@The.Innovative.Indian
2 жыл бұрын
Thanks brother👍 ❤
Nice project
@The.Innovative.Indian
4 жыл бұрын
Thanks a lot for the appreciation
bro can you please share a link of a closed Reed switch as I need to turn on light when magnets are not in contact (for car door) but i am not understanding which one to choose so please share a link from Amazon
@The.Innovative.Indian
2 жыл бұрын
Brother these are available in the local electronics market so you can search over there I am sure you will definitely found them
@overreactengine
2 жыл бұрын
You'd want a "normally closed" (NC) switch (most are "normally open" (NO))
But the reed switch will blow after few operations what is the solution for it?
@The.Innovative.Indian
5 ай бұрын
Use relay and drive relay driver circuit with the reed switch. reed switch are for signal generation that is high or low, not to drive applications.
I figured out if you run too much current through one of these it becomes a wire lol
@The.Innovative.Indian
Жыл бұрын
yes it will short if you will pass high amount of current ....
What is Real time uses about the project?
@The.Innovative.Indian
Жыл бұрын
There are lot of usage. But few of them are in door locks , security system and in machine automations.
Can the light led switch to dc motor
@The.Innovative.Indian
5 ай бұрын
Light Load you can run but for the bigger loads you have to go for relay unit or higher power Reed Switches
Can this sensor handle the 12v dc current of motorcycle?
@The.Innovative.Indian
4 жыл бұрын
No it can't .... use this to program your microcontroller only then do whatever task you want to do
@cndbrn7975
2 жыл бұрын
Use a relay switch or transistor
Sir please Show two wire LED inbuilt reed switch Connection
@The.Innovative.Indian
4 жыл бұрын
actually i didn't get your question please elaborate ...
@surendersingh-sn5tk
4 жыл бұрын
Sir दो तार वाले reed switch के connection बताओ जिसमें LED भी हो 24volt DC
Hi, I had connected two reed sensor in series connection.Then I tried to check the continuity,but I can observe that continuity without magnet and if I'm passing the magnet nearby then the continuity is breaking
@The.Innovative.Indian
3 жыл бұрын
Just share a sample video .... i'll help you to understand
Could it handle 3DcV?
@sadkingbilly
3 жыл бұрын
Yes, any led can handle 3v without need for any added resistor(s). Just connect correctly, longest leg is always the +
@The.Innovative.Indian
3 жыл бұрын
Yes it can
Nice and a informative video bro,! Can I use in series with LED strip light for 2 Amp load?
@The.Innovative.Indian
10 ай бұрын
No you cannot give that much amount of load to it
@nandukumar5904
10 ай бұрын
@@The.Innovative.Indian Atleast 1Amp?
@The.Innovative.Indian
10 ай бұрын
@@nandukumar5904 There are special reed switches which can even support 2ampere as well .. just buy them and use them but this one cannot support one ampere.
@nandukumar5904
10 ай бұрын
@@The.Innovative.Indian ok... Y thank you brother!!
How to buy? Plz provide link
@The.Innovative.Indian
Жыл бұрын
plz check ... its given in the description...
Are you aware of any permanent on/off reed switch?
@The.Innovative.Indian
4 жыл бұрын
give signal of reed switch to the microcontroller to make the things permanent on and off through reed switch
I want reverse working
@The.Innovative.Indian
Жыл бұрын
opposite logic reed switch or magnetic sensor is also available in the market ....
How can i buy this
@The.Innovative.Indian
3 жыл бұрын
It's available on amazon
Components anupunka anna
@The.Innovative.Indian
Жыл бұрын
the only component here is reed switch or simple magnets
Install mo nga sa cellphone ko
@The.Innovative.Indian
2 жыл бұрын
Please elaborate your question in English
O companant Ka ama kha
@The.Innovative.Indian
Жыл бұрын
please specify your doubt in english
.🆑🎉Teri khamoshi agar majboori hai To rehne de CALL konsa zaroori hai🎉❌👍
@The.Innovative.Indian
2 жыл бұрын
Good lines 👌😊