thank you for a good introduction to Cura. i found it very helpful

Thank you so much for a great informative video for us newbies with 3D. I think i have a lot more confidence now after this.

@509drone2

Жыл бұрын

Right on my friend. I'm glad it was helpful.

Great video very informative thank you

Very useful, thanks for sharing!👊

@509drone2

3 жыл бұрын

Glad it was helpful!

thx now to make some boxes for all the useless stuff Im gonna print

THANK YOU SO MUCH I WAS GONNA GIVE UP I LOVE YOU

Awesome entry video thank you!

@509drone2

Жыл бұрын

You're welcome. Glad it was helpful

Thank you so much this will help me soo much

Thanks this really helped me Before I was so confused but u really honestly helped

@509drone2

2 жыл бұрын

Right on bro. I'm glad it was helpful

Great video, on a different note you seem to be suffering from acid reflux? Talk to your GP about anti acids. 👍🏻

What happens if your drag a file over and it’s only showing a shadow at the base and not the whole STL

509 DRONE love your tutorial and instruction. Made it so easy for me to understand it. 🎉🎉🎉🎉🎉👋👋👋👋👋👋👋👋

Very nice video I have learned a lot thank you, I am new for 3D printing, I have a same 3D printer I am trying to design a small gear for my old SONY walkman it requires a very strong gear to handling a large torque from the motor, could you please provide the correct settings for the ENDER-3 printer? I am using PLA.

@509drone2

2 жыл бұрын

Right on man, glad it was helpful. If you check out my other videos I show all my settings. Let me know if you still need help.

I think you for the content. It is very helpful for a newbie like myself. How do I zoom without a mouse roller. My laptop has the touchpad style mouse?

@509drone2

2 жыл бұрын

Sorry for the late reply, I'm glad my content is helpful. Did you figure out the hotkey to zoom in? I'm pretty sure you can use the +/- arrows in the top right or left corner to zoom in or out.

ty if u have a bibo 3D printer can u show me how to put in fill.

So I came from using Matter Control which no longer works on my mac. So now I have cura and I am having trouble with my prints printing above the bed or in mid air. Any suggestions?

Very helpful, the only thing is a lot of the files in Thingiverse when downloaded are in obj and have to covert to Stl before loading the file into Cura.

@509drone2

2 жыл бұрын

I havent had that issue at all? I wonder if you have something set on thingerverse to download that file type?

How can I resize only a part of an object?

I am new to 3D printing. I set the coordinates to (0,0,0) but while printing it goes to the end of the printing bed and prints on the corner, with material falling down. Can you help me with how to correct it? I am using the same software with elegoo neptune 3.

I took some stl files from thingiverse, sliced them with cura and wanted to print them with an Artillery Hornet. Although I did the same steps and kept the same settings for all of them, at some the extruder starts way up, 1-2 mm, and it prints in the air whitout material. I leveled the bed previously, but when starts printing goes up 1-2 mm. Thank you for your attention.

@OldBonesCreative

2 жыл бұрын

I just had this problem with the Creality CR10S Pro V2. I leveled the bed at least 5 times between manual leveling before the print and leveling while it was printing the brim. On this printer, I realized there's a z-axis offset in the print options menu that brought the nozzle down closer to the bed for printing. I'm not sure what the problem is or where it originates from (presumably a setting in Cura I missed), but bringing that offset up from -1.98mm to -1.40mm fixed my issue.

Very interesting program.... Thanks for the share 👊😁 #BriannaLynn24

So this is probably the most remedial question you're going to get. So anything I want to print is going to be a file from a different program like CAD? I do not design my item on Cura? I have to learn CAD?

@509drone2

2 жыл бұрын

This is correct. Sorry for the late reply brother. You DO NOT have to design your own prints though. You can download & print ANY STL file that you can find. Cura is just the "slicing" program. Once you have your design (aka STL file) you bring it into Cura and that is where you set your settings that are unique to your printer. Things like temperature, speed, etc. Hopefully you have already got a printer, and have been printing by now :) Let me know how it goes.

@sunnydoom2726

2 жыл бұрын

Etsy also has a lot of cool stl files for $. Or Thingiverse has lots of cool stl files for free. But there are free 3D modeling apps you can play with if you want like Fusion 360 and Blender.

I noticed when i was researching (i dont have a printer yet just in my research) and something had no way to change the currency type. I think it was Cura.

@509drone2

2 жыл бұрын

I think you are correct. Hope you got your printer by now :) Sorry for the late reply.

Hi thank you for your video, i am new to 3D printing. i have just purchased a Viper printer and downloaded Cura 5 onto my computer. I am trying to figure out how to change the scale from the X,Y & Z that is in mm and change the scale to a 1/ 6 scale. can you help me? I am new to 3D printing and i have never printed anything befour this is the first time

@reflexreaction3797

27 күн бұрын

change percentages i'm guessing 100 / 6 = ?

What am I doing wrong? After slicing it only gives me the option to "save to disk"

I’ve been asking around and had no luck on finding a budget friendly laptop that supports cura. Can you please help?

@darkcustomxxx7252

Жыл бұрын

anything with at least Intel i5 and up in something like a Lenovo will do it. Then pick the RAM and GIG to suit your budget. 8g with 256 or 512, etc.. I really don't think you need to go up the gaming path with the serious graphics cards and stuff.

I'm sorry but your PIP on the lower left is so big it's blocking that part of the screen so I couldn't see the beginning script and some of the bed

@509drone2

2 жыл бұрын

Sorry about that :( I noticed that as well after I uploaded it. Is there any specific part you had a question about?

@ChinaAl

2 жыл бұрын

@@509drone2 Nothing specific right now. I got the gist I've been on S3D for a long time but I recently replaced my Ender 5 with this newer Kywoo Tycoon Max snd it comes with Cura. Cura has changed a lot so I decided to find out everything I can and maybe try it again. Thanks . Your video was pretty good other than the few areas blocked. Changed my thumbs-down to a thumbs-up

Help it says Invalid file

@509drone2

Жыл бұрын

Which file?

It kinda sucks because it doesn't have anycubic mega x

I love how nobody shows how to actually send the signal to the printer so it will start printing it

@509drone2

2 жыл бұрын

You use the SD card? You know you would get better results if you actually asked your question instead of making a condescending comment.

@MOE13576

2 жыл бұрын

You have to use telepathy in order to send the signal to your printer. Hope that helps

@509drone2

2 жыл бұрын

@@MOE13576 lmao

@MOE13576

2 жыл бұрын

@@509drone2 hahaha

@tlalok08

Жыл бұрын

You tell the printer to print now! ….. he actually said you save the file to your sd card which goes into the printer. I think he said it 2-3 times as a beginner.