How To Use Cricut Print Then Cut / DIY Labels and Stickers
Тәжірибелік нұсқаулар және стиль
Hi guys! In today's video you will see how easy is it to use Cricut's print then cut feature to make labels. I use it today to make some labels for strawberry jam. I also use this feature a lot to make stickers, file labels, product tags and lots more. Be creative and have fun using your machine there is so much you can do with it!
I used the following items in today's video:
Cricut Maker: amzn.to/3htXcIo
White Sticker Paper: amzn.to/2UNbni3
HP Officejet 6962 Printer: amzn.to/3e6cykn
Brown Cardstock Papers (8.5"x12"): amzn.to/2MXlTz3
Also visit my store for all my favorite products! www.amazon.com/shop/christyca...
This post contains affiliate links from which I may make a small commission at no cost to you thru Amazon Affiliates Program.
Пікірлер: 297
This helped so much. The video wasn’t ridiculous long, straight to the point, simple, and easy to understand. Thank you so much.
@AppalachianHomeCo
2 жыл бұрын
You're so welcome!!😊
@suzeymilian8422
2 жыл бұрын
Exactly 😃
Thank you!!!! The best, most simplified Cricut tutorial ever!
@AppalachianHomeCo
2 жыл бұрын
So glad this was helpful!!😊
O M G. You are a lifesaver! I could not find anything on how to do this until I ran across your video. My heartfelt thanks for making this so easy to understand for this Cricut rookie!
@AppalachianHomeCo
3 жыл бұрын
Oh I’m so glad this helped!!
I’ve had my cricut for one year and a half and didn’t know that I could save money by printing and cutting my own labels. Thank you 🙏🏾
@AppalachianHomeCo
3 жыл бұрын
Yay so glad to help!!
@samanthaarriaga
8 ай бұрын
Did you actually save money in the end. I make my own labels but through label paper and am wondering about this? Which one would you pick?
Thank you for this video! I have been going bonkers trying to print out sweet chilli jam labels for the last hour, its finally worked for me!
@AppalachianHomeCo
3 жыл бұрын
Yay I’m so glad this helped!!
I've had my cricut for 4 months and couldn't figure this out. Thank you so much!!
@AppalachianHomeCo
3 жыл бұрын
Yay! So glad this was helpful!!
YES!!! I was so intimidated but I followed you step by step and printed my labels!!! Thank you soooo much!!!
@AppalachianHomeCo
2 жыл бұрын
Yay so glad this helped!!😊
Thank you -- I've been shying away from stickers because what I saw or read made it seem so difficult. I followed right along with your video and my stickers came out great! Thank you.
@AppalachianHomeCo
3 жыл бұрын
Aw that’s so great I’m so glad it turned out!! I love making stickers.💕
Thank you for sharing. My husband got me a cricut maker machine. I'm so excited. It's coming today. You are such a inspiration. Thank you for all you do♡♡
@AppalachianHomeCo
4 жыл бұрын
Yay!! So exciting! I love the Maker you can do so many things with it.🙂 Thanks so much!
Labels/stickers/tags- one of the main reasons I wanted the Cricut. I’m just getting started. Have to really pace myself- headaches. I like your presentation style. I didn’t know that print and cut was the feature I needed for the task.
@AppalachianHomeCo
3 жыл бұрын
Hi! I love doing the stickers and labels. And yes too much can be headaches!
Out of all the videos on KZread; yours was the best. Your video is easy to follow and direct to the point. Thank you so much, newbie here. 😊
@AppalachianHomeCo
3 жыл бұрын
That’s so nice thank you! I’m so glad this video was helpful!😊
Thanks for the tutorial!! You taught me how the print and cut round stickers to seal my son and his fiancé’s wedding shower invites!
@AppalachianHomeCo
3 жыл бұрын
Yay so glad to help!!😊
Thank you! I was having trouble figuring this out! You covered everything I needed to know
@AppalachianHomeCo
3 жыл бұрын
Yay so glad I helped!
This was the most easy to follow sticker tutorial!! Thank you!!
@AppalachianHomeCo
3 жыл бұрын
Awesome thanks so much!!!
Grazie Mille!!! I’m starting a homemade biscotti business and I need labels. Your directives are so easy to understand. Thanks again.
@AppalachianHomeCo
3 жыл бұрын
How neat!! So glad to be of help!!
Woohooo!! thank you for this video! I have been looking everywhere for someone who doesn't sell stickers but makes circle labels for product. Thank you! I love onlinelkbels too. ;p
@AppalachianHomeCo
3 жыл бұрын
Hi thanks so much! So glad you enjoyed this video!😊
This is the best tutorial I’ve watched on how to create labels ! Thank you !!!
Thank you very much. Your instructions are easy to understand. Now if I can figure out how to get Cricut to cut on color paper, I’d be a happy camper!
@AppalachianHomeCo
2 жыл бұрын
So glad this was helpful!!
Thank you Christy! I needed this one. 👍❤️
@AppalachianHomeCo
4 жыл бұрын
You’re so welcome!!☺️
Thank you, Christy. -From a grateful Appalachian startup.
OMGoodness this is by far the best video I have found! I am in a pickle because it took so long to do my canning (1st year). That and I procrastinated! LOL! Thank you!
@AppalachianHomeCo
2 жыл бұрын
Lol! Thank you so glad this was helpful! Already planning for this year's canning!
Thank you for sharing how to make stickers. Really easy to follow.
Super excited I own a skincare business and this is going to cut down on time major
@AppalachianHomeCo
3 жыл бұрын
That’s great I’m so glad this was helpful!!
You give the best directions. Very easy to follow and understand.
@AppalachianHomeCo
3 жыл бұрын
Thank you so glad this was helpful!
This video helped me so much! After 1,000 videos that were no help, this Is the best one! Thank you!! I loved the video! Helped me out step by step!!❤
@AppalachianHomeCo
8 ай бұрын
So glad it helped you!!!
Thanks so much, so nice to see someone get to the point!
@AppalachianHomeCo
2 жыл бұрын
Hi thank you
Thank you so much, I've been trying to figure this out on my own for days.
@AppalachianHomeCo
3 жыл бұрын
You're welcome so glad this was helpful!
Thank you so much! I have been struggling to figure out how to print cut round labels. I was ready to give up! Now I feel confident in doing it myself! 💪🏻🙌🏻
@AppalachianHomeCo
3 жыл бұрын
Hi! That’s so great I am so glad this was helpful!!
Thank you for this video. It was huge in helping me figure out print & cut. Very helpful.
@AppalachianHomeCo
3 жыл бұрын
Thank you I’m so glad this was helpful!!
Super organized love it
@AppalachianHomeCo
3 жыл бұрын
Thank you!!
Thank you for this tutorial! It's the help I've been looking for!
@AppalachianHomeCo
3 жыл бұрын
I’m so glad thank you!!
This was an amazing Tutorial 👏🏾 🙌🏾 😍
Trying this today. Thank you!!!
Love your videos. Glad I recently discovered your channel 😁
@AppalachianHomeCo
3 жыл бұрын
Thank you so much! So glad you found me😊
So happy to have found your channel. This method just saved me so much money for my business. Thank you so much. New subscriber!
@AppalachianHomeCo
2 жыл бұрын
Hi so glad you subscribed thank you!! Glad this video helped.😊
Thanks for sharing. You made this look so easy ❤
@AppalachianHomeCo
3 жыл бұрын
You're so welcome!
Thank you!!!! I was deeply struggling to figure out how to make labels
@AppalachianHomeCo
2 жыл бұрын
You're so welcome!😊
Loved it x
@AppalachianHomeCo
4 жыл бұрын
Thank you Andrea!!🙂
Thank you for making this video!
@AppalachianHomeCo
3 жыл бұрын
You’re so welcome!☺️
Thank you for sharing. Very very helpful.
@AppalachianHomeCo
3 жыл бұрын
So glad the video was helpful!!😊
Best video I’ve watched!! Thank you
@AppalachianHomeCo
3 жыл бұрын
Thank you so much!!
Great explaining!! Really helped
@AppalachianHomeCo
3 жыл бұрын
I’m so glad thank you!
New to your channel and I’m in heaven thanks
@AppalachianHomeCo
2 жыл бұрын
That's so sweet thank you!
This video just saved my life
@AppalachianHomeCo
2 жыл бұрын
Lol I'm glad!
This was so helpful thank you!!
@AppalachianHomeCo
3 жыл бұрын
Of course! So glad it was helpful!!
Awesome explanation . Thank you
@AppalachianHomeCo
3 жыл бұрын
Thanks so much!
Ma’am thank you sooooooo much this was so helpful❤
awww CRICUT is so usefull for stickers,, and tags!!!!!!!!
@AppalachianHomeCo
3 жыл бұрын
Yes!!! I love making stickers probably more than decals.💕
Great tutorial thank you
thanks for sharing these great ideas!
@AppalachianHomeCo
2 жыл бұрын
So glad you liked these!
Thank you so much 💕👏
I need to make labels for my Honey Jars, and this looks like the solution. Now if I can just get my daughter to let me borrow her Cricut...
Very helpful!!! Thank you!!!
@AppalachianHomeCo
2 жыл бұрын
I'm so glad!
This was extremely helpful! Thank you so much. How did you make your soap labels? Did you print and cut those as well?
@AppalachianHomeCo
3 жыл бұрын
Hi! So glad this was helpful. Yes you can print then cut labels like for soap as well especially if you have irregular shaped labels. For straight rectangular cuts tho you may save paper by just printing and cutting with a paper cutter.
Thank you! 😊
Thank you so much 👏👏👏
thanks for sharing .. very useful
@AppalachianHomeCo
4 жыл бұрын
Thanks so much!🙂
Thank you very helpful.
@AppalachianHomeCo
2 жыл бұрын
You're welcome!
Very Helpful Thank You - newbie here
@AppalachianHomeCo
3 жыл бұрын
Hi thank you!! I’m so glad this was helpful.😊
Thank you, thank you!! I agree with the others, I was going nuts trying to figure this out and your video was quick and to the point without spending even more time listening to people rattle on about their crafts and company. :-)
@AppalachianHomeCo
3 жыл бұрын
That’s so nice thank you! I’m so glad this video helped!!
Thank you for this
@AppalachianHomeCo
3 жыл бұрын
You’re welcome!!😊
This is great tutorial
@AppalachianHomeCo
3 жыл бұрын
Thank you so much!!
I really want to get one of these machines. I think my labels for my lipgloss would look a lot better using this. Thanks for the great video.
@AppalachianHomeCo
3 жыл бұрын
Ooh yes I made some chapstick labels and love them. 🙌🏻
Amazing!
@AppalachianHomeCo
3 жыл бұрын
Thanks so much!
@SheWritesHerJourney_
3 жыл бұрын
@@AppalachianHomeCo you're welcome ☺️
This was great! Thank you. What if you need to create rectangular labels on cardstock that is a particular color? Would you make the rectangle also transparent? If so, how would the circuit cut out the shape? Would I need a rectangular outline around the text? Hope this question makes sense.
@AppalachianHomeCo
2 жыл бұрын
Hi! If you want to cut out a rectangular shape the process would be to create a rectangular around the text or image, then select both the rectangle and text, then select flatten. Then Cricut will cut out the rectangle shape after it reads the registration marks on your print out. Hope that helps!
What was that banging at :45?! I thought someone was breaking into my bedroom. 😂
@AppalachianHomeCo
3 жыл бұрын
Lol! Probably I have some kiddos!😂
thank you thank you !!!
@AppalachianHomeCo
3 жыл бұрын
You’re welcome!!!
Thank you! I've been trying to figure this out and was about to throw in the towel when I stumbled onto your video. So helpful and easy to follow. Thank You!
@AppalachianHomeCo
2 жыл бұрын
Hi that's great I'm so glad this helped!!😊
Hi Christy! I decided 15 minutes ago that I need my own Cricut. I hopped on youtube, and you were the first video that popped up. Your videos are great!! My daughter and I have a tiny business that has grown into a small business, and we need to make our own labels for candles, bath salts, etc. Asking my friends mom to make the labels is just too much hassle now. Which Cricut should I buy is my main project is product labels? Thanks!!!
@filespace123
3 жыл бұрын
*if* my main project is label printing
@AppalachianHomeCo
3 жыл бұрын
Hi! So glad you found my channel thank you!! If you are only cutting labels then the Explore Air 2 would be great if you’re looking for less expensive. It will cut stickers on the vinyl setting . . you might have to test cut on your label paper to make sure that’s the right setting for you.👍🏼
Thank you
great video. very helpful. I do have question...when I do my print in cut for stickers or anything else, like making magnets, I get white lines around my stickers...mostly just on one side. Can you help with that? any advice? Not sure how to upload a photo so I can show you.
@AppalachianHomeCo
3 жыл бұрын
Hi thank you! Yes it sound like you need to calibrate your machine. You go into Design Space, in the top left menu beside “home” and go to “calibration”. Then select print then cut, and follow the steps. It will align your machine to cut the designs much better.👍🏻
Thank you so much for this video!! I couldn't figure it out. Def needed this. I do have a question. When it prints the font has a red bleed on it. Do you know how to keep this from happening? Thank you!!
@AppalachianHomeCo
3 жыл бұрын
Hi! I’m so glad this was helpful! Check to make sure the “bleed” is turned off in the menu just before you print, it looks wonky when that is on. Bleed is useful when you are cutting images but not when you have text sometimes. Hope that helps!
@hildanorris3760
3 жыл бұрын
@@AppalachianHomeCo how do you turn the bleed off?
I'm just learning about Cricut and want to get one. What Cricut do you have in this video? What do you recommend?
@AppalachianHomeCo
2 жыл бұрын
I think this video had the Maker which I love because you can cut thicker materials than the Explore Series. If you just plan to work with vinyl and thinner materials tho, the Explore is great.
Haiii! Thanks you so much for your explications, much of my question are fullfiled but how do you print your label in color? Ink color ? What is the Brown kraft paper for, we dont see it in vidéo 😮
I was watching your video and this super great but do you have to have a cricut subscription to make these labels? I just bought the cricut explorer 3 and I don't see how to do this.
@AppalachianHomeCo
Жыл бұрын
Hi! Yes I do subscribe to Cricut Access every month but you shouldn't need it to make custom designs like this...there is a fee to use Cricut fonts, but if you have your own font it shouldn't cost extra.
@KarynMowbray
Жыл бұрын
@@AppalachianHomeCo Hi Christy...Thank you so much for replying! I did find a font that was free but in my design space i don't see the option to print my project on a printer prior to cutting the circles on the cricut. Is this something I am missing?
these are so cute. I am new to this. Can you tell me where you got the vine image from and how to upload it? Where is the best place to find these images?
@AppalachianHomeCo
4 жыл бұрын
Hi thank you so much! I drew the vines on IPad they are available for free download on my website theappalachianhome.com/freeprintables . . Just scroll down to them! If I don’t draw my own designs I like Etsy for cute SVGs 👍🏻Just clock on the download button on my site and save it to your computer. You can upload it directly to design space by opening a new project, hitting upload, and select the file. I usually save my images as complex, then save as print then cut. Hope that helps!
Does the cricut print the labels as well or will I need a printer also? Thanks
@AppalachianHomeCo
3 жыл бұрын
Hi! You will need a regular printer to print the images first.
Thank you so much for this, I already have the coloured sticker paper, how do you remove the colour or background of the circle?
@AppalachianHomeCo
8 ай бұрын
Hi! I just made the background white, that way it won't print any color.
How did you do the white simple labels? Did you have to put a white box around each one so that the Cricut would cut a rectangle shape? I like that there’s no line showing. Thank you for your helpful video!!
@AppalachianHomeCo
Жыл бұрын
Yes, exactly. You can just draw a white rectangle and flatten the design to the rectangle.
Hi, do you think that an HP laserjet pro 200 color mfp m276nw laser printer CF145A would work for this job?
@AppalachianHomeCo
2 жыл бұрын
Hi! Ooh I would love a color laser printer....it should work great for the labels.
Im thinking about purchasing a cricut but a lil intimidated..lol Can I make labels like you did if I buy a cricut air explorer 2? And what are the pens/markers for?
@AppalachianHomeCo
3 жыл бұрын
Hi! I was very intimidated when I first got my machine too.😊 Yes the Explore Air 2 can make labels as well and I use the pens and markers to write in cards, and also you can use in fusible ink markers to draw on laser copy paper and then iron on that design to T-shirt’s or towels and things like that.👍🏻
Hey Christy! I have a question when I’m uploading to my Cricut from my photo library the image usually is black and I can’t see it or it uploads as print then cut. I am wanting to just cut the image can u explain to me how I do that or show a video...I find that your videos are really helpful..also when I get an image online in google images it does the same thing. Thank you so much for your videos they help me out a lot with my Cricut
@AppalachianHomeCo
4 жыл бұрын
Sure! I have gotten some questions about that. The way I usually do it is to save the image to my computer (PNG if possible) and upload to Cricut. You can remove the back ground parts with the erase tool in design space when you are uploading it. There are lots of ways to upload images I will do a video on it for you I will try and film tomorrow. 👍🏻
@amyriggs6930
4 жыл бұрын
Christy Cain - The Appalachian Home ok ty so much bc every time I try to upload one it is black I can’t see the image at all in the cut save
Hello. What if I have a different background color from the front, how do I print it ? I have a gold logo but want a purple sticker with gold lettering
Do I have to change the setting on my printer for the paper for it to print on the sticker paper?
@AppalachianHomeCo
3 жыл бұрын
Hi! Depending on which kind of paper i am using, I use a regular plain paper setting for plain sticker paper, and a matte photo setting for weatherproof matte sticker paper, then the glossy photo setting for glossy sticker paper.👍🏻
Okay but what about like glossy stickers. How does that work with printing will the ink smear? Do you have to have a specific printer? Also do you have an idea of what kind of sticker paper I might need
@AppalachianHomeCo
2 жыл бұрын
Hi! I use a Canon Pixma Megatank and haven't had any issues with smearing on glossy paper, just let it dry for about 20 mins before you touch or cut. I like Naeto labels Glossy sticker paper the best, but Online Labels also has great quality sticker paper. Available in glossy, clear, regular, and weatherproof,.
Can you print the labels in Canva and then cut them with cricut?
Just wondering, what computer did you use this program on? I just bought a cricut and found out it is not compatible with my chromebook laptop
@AppalachianHomeCo
3 жыл бұрын
Hi. I mainly use an HP Envy, and sometimes an iPad with mine.
Can the cricut cut textured paper?. Struggling to printing labels straight with one overlapping the other.... 😢
I don't have the fill option. Not sure what I'm dong wrong. I attach letters to my label image. Those letters are sent to pen. I attach it to my circle put the words don't print on the image. Is this JUST for the pen on the cricut? Can I TYPE words, have the printer print and then cricut JUST cut the label?
@AppalachianHomeCo
2 ай бұрын
Yes you can definitely just print the image and not have to work with the pen. I'd rather do it that way it's must easier.😉
Hi is this possible on the app? I’m trying to find the fill option on my iPad design space and can’t find it. Ty
@AppalachianHomeCo
2 жыл бұрын
Hi I think some of the features are not available on the app.
Is it true you can only use the print and cut feature if the labels are printed from an inkjet?
@AppalachianHomeCo
4 жыл бұрын
🤔 I’m not really sure I have always used an inkjet for printing images but I do have a laser printer I’ll try it and see.👍🏻
Does it matter what kind of printer you need for this project--inkjet or laser?
@AppalachianHomeCo
2 жыл бұрын
No it doesn't matter I have used both.
do you only have to use a colored printer ?
@AppalachianHomeCo
2 жыл бұрын
Hi! You can use any printer to print your design.
I have a laser printer will it be the same quality?
@AppalachianHomeCo
3 жыл бұрын
Hi! If you have a color laser printer it should work fine on something like these. My laser printer only prints black so I never use it for print then cut.🤔
I’ve been wanting to get a label printer for my small business for the longest time and finally pulled the trigger. I’m glad I did ! This machine is great kzread.infoUgkxw55tQTywUAAOsbrlwxONZULry77sFF1Q and the blue/green color matches the rest of the accents in my office. My favorite part is how small the footprint is. It’s less than 1/4 the size of my regular printer.Set up was fairly easy. Seller will email you a link with video instructions Which I found to be more helpful than the written instructions. I use a Mac and had no issues. They even included an adaptor for USB to USB-c which is great because I’m always losing mine! I had a few issues getting the labels to print properly and wasted quite a few sheets. You need to play around with the settings to get everything adjusted just right. If you have the wrong settings, it’ll crop off the edges or feed through blank labels. These aren’t issues with the machine though, just user error.
Does your printer have to be connected to your cricut for this to work?
@AppalachianHomeCo
2 жыл бұрын
Hi no I just have my printer connected to my computer...either thru wifi or connection.
Do you have a special printer? ( I’m new)
@AppalachianHomeCo
4 жыл бұрын
Hi! I have an HP 6962, but I really like Canon printers. The print quality seems brighter.
would this cut stickers from A3 size paper?
@AppalachianHomeCo
3 жыл бұрын
Hi! The largest area Cricut will cut on a print then cut project is 9.25 inches by 6.75 inches.
Is that the printer ink that made them brown?
How do you actually print your project labels on your printer. I cannot find the print icon to connect to print before going to be cut on the Cricut
@AppalachianHomeCo
3 жыл бұрын
Hi. You will be prompted to print your project before Cricut actually cuts. Go ahead and go to Make It and you will see the Send to Printer button near the top left, click that and then you can select your printer and preferences, choose to turn off or on bleed, and use printer dialogue which lets you change other print preferences before you print. Hope that helps!