How To Use Body Filler - Mixing, Spreading, Sanding & Tips - Part 1 of 3 - Kevin Tetz at Eastwood
Автокөліктер мен көлік құралдары
Part 1 of 3. Kevin shows you the proper way to mix, apply and sand body filler using the Eastwood Contour line of body filler products. He'll show you some great tips along the way as well as some cool products that will make your job a lot easier.
Buy Eastwood Autobody Products Here: www.eastwood.com/autobody/body...
Part 1 of 3. Kevin shows you the proper way to mix, apply and sand body filler using the Eastwood Contour line of body filler products. He'll show you some great tips along the way as well as some cool products that will make your job a lot easier.
Eastwood's custom-blended Contour Premium Body Filler contains rust inhibitors to prevent corrosion long after paint has been applied. Its unique self-etching properties bite into the surface for excellent adhesion. This unique formula spreads and sands beautifully, thus eliminating pinholes. Furthermore, its excellent feather-edging properties won't clog up sandpaper. This premium body filler is a true one-step application, since no glazing putties are required.
Eastwood - Since 1978. Are YOU an Eastwood Guy?
Пікірлер: 235
I will be an Eastwood guy soon. I'll be in the market for a complete paint kit later in the year. I need everything from the compressor, spray gun, to all the accessories and equipment needed to do a complete car. I'm building a list on your website following these videos,I will implement all this information I do have a little bit of exsprience but not enough to give training because we are opening a full auto collition training centre in SOUTH AFRICA with the Celette bench training to panelbeating and spray painting. Thank you EASTWOOD for your videos.
Watching this again in 2020 wishing this guy was still making new instructional videos today
@daronlapping4590
3 жыл бұрын
Haha me too. Exactly the same thought.
@inthehomeshop
3 жыл бұрын
You need to follow him then. He's got alot of cool things in the works, right up with what youre asking. @handsoncarskt on Instagram, Kevin Tetz on Facebook
@christopherboyd1788
3 жыл бұрын
felt this 😬
@ozjado
3 жыл бұрын
@@inthehomeshop thanks mate
@danielkustra9071
3 жыл бұрын
Isn't he on Trucks! or HotRod TV?
2020 covid 19: who else is watching, ready to build, with this time off
@abramschmitt9253
4 жыл бұрын
Nice I've got time for painting now
@cognac8297
4 жыл бұрын
I may have messed my car up do to covid 19 I've been sanding for months and the car its self has shrunk and the engine is now a three cylinder were did I go wrong , I may have used the wrong grit, half the engine block is now dust
Kevin's such a cool bloke. I watch these videos just as much for him, as I do the instructions.
I believe Kevin might be the best product spokesman since Billy Mays, with out all of the non sense yelling. Nice work Kevin, I believe you should be hosting a major Hot Rod show yesterday. very talented...
@FreddyFunderbunz
5 жыл бұрын
With that dumbass Bluetooth on hos head,he looks like the sham-wow guy that beat up the hooker
@matthewsalvador9783
3 жыл бұрын
Burger Punk what really I’m gonna look that shit up never mind the body filling tutorial hahaha
This man brings pride to all Kevins
Absolutely awesome video! I live in a country where proper workmen are rare and proper tools seem even more rare! But with these explanations and tips I can do alot of the repairs on my car myself. Thanks alot
@eastwoodco
3 жыл бұрын
Glad you enjoyed it!
“Make it rain!!” Hilarious!!!! Authentic commentary!!!
I like how Kevin keeps the vids real
Love this guy. “I feel like Bob Ross making a happy little bondo like”. Classic
@eastwoodco
2 жыл бұрын
Fill in those dents with just a little Phthalo Green... 🌲🌄🌳
Nice work. Thanks for sharing so many tips and tricks as well as solid fundamentals of filler and paint prep. BTW my first car was a 78 ZED 28 white.
The signs that people staple to utility poles make excellent and free mixing boards. And you are doing the general public a favor!
@I_like_turtles_67
4 жыл бұрын
I bought the aluminum one from harbor freight. I guess mixing on cardboard isn't a good idea. Because the hardener seeps into the material and doesn't mix properly. Luckly I never had an issue prior to buying a real mixing board.
I still watch your pantucation videos kevin... man that wild mid/late 90's grunge hair just love it lol
this is a great channel ... I wish i would have found you guys a long time ago
Man guy is doing a great job and you can tell he loves what he is doing very important
Earth 🌍 to Kevin ? Where are in?? ..., I love how u are real and not just “ pushing “ Eastwood !!!
Any issues with contamination putting aluminum filler on steel? I know when we fix aluminum hoods and things we have to be very careful to wrap our hammers and dollies (which are steel) in order to not contaminate the surface. Thanks
@psk5746
3 жыл бұрын
Good question
Thanks for the videos Eastwood, does Kevin have his own cable show yet? He should, thanks again you guys.
Visit Eastwood.com for everything you need to do the job right. Don't forget to SUBSCRIBE to our KZread channel. Are YOU an Eastwood Guy?
@elvintorres1313
7 жыл бұрын
Eastwood Company
Awesome videos, thanks for the refresh 🤙🏽
Just doing this exact thing on my Jaguar XKE restoration. Nicely timed Kev!
We used a paint shaker to mix body filler in autobody school. No air bubble problems.
6:48 Make it rain!! Dude I died, kevin is Awesome. Keepin it Gangster 😎
very informative, ii'm such a rookie i thought it looked good when he first applied the filler and pressed it as he wiped and said to myself oh like that? then he continued to apply more and more and felt lost after it piled up. what is the rule for applying filler over an entire panel it there a certain thickness it must reach or thinner the better? Also does the metal have be tripped or can there be some paint still present?
Can I use short strand fiberglass on top of epoxy primer
Hi kevin great work that you doin and I have a question for you can I replace the regular body filler with the fiber body filler
This guy is awesome Smart but a riot to watch. Fun video
A question I was curious about was regarding self etching primer. Is it considered to be an "old school" approach to first coating over bare metal? Is it that big of a disadvantage over the new epoxy primer for bare metal coverage?
I will be an Eastwood guy soon. I'll be in the market for a complete paint kit later in the year. I need everything from the compressor, spray gun, to all the accessories and equipment needed to do a complete car. I'm building a list on your website following these videos from Tetz and the ZedSled
@eastwoodco
2 жыл бұрын
🤘 One of us. Gooble gobble.
Thank you. You're a Great teacher.
Awesome videos and technical advice. From Grand Forks BC
I have a pretty deep gouge on the metal door panel of my Honda element. Which product would be best for this. It does not need to be perfect.
What do you recommend for an old '72 240Z? The side panel has about a 1/4 inch depth change.
For beginners the video starts at 15:18 (The mixing body filler part). Everything before that is what I consider "Information for experienced people"
@brockkies8566
3 жыл бұрын
It's a whole lot of product salesmanship. I couldn't believe how much hardener he used in his filler and how much filler he put on the panel. Made for a lot more work than he needed. When you have been doing it for many years you realize that filler builds a lot more than you think it does. Less is better. Less filler, less sanding, less product, less cost. Wouldn't have to go over it with 36grit if he didn't have to sand so much filler out. He didn't look very experienced at administering filler to me either.
@brockkies8566
2 жыл бұрын
@A. Melbs Not particularly. I don't watch a whole lot of youtube videos on this stuff. I own a body shop and run both ends of the insurance/body work so I stay hooked up. If I come across one I will recommend it to you
Omgosh, he just said "webernet" 🤣 I'm am so using this one! Also, thanks for your teachings
Mate, thank you! I had insomnia until I found this channel :)
What body filler should i used for plastic and wood, i am doing a custom dash for my truck
Does body filler need to be applied to completely clean metal ? Ie. No paint layers left over from sanding, primer ? I guess what im asking is, does every little bit of paint and primer need be removed for body filler to stick to the panel ?
What body filler would you use for a fiberglass corvette.?
Excellent video.
Thanks for the videos, I am restoring a 68 firebird.
@3muj235
9 жыл бұрын
Fack you ☺
Kevin is the man
I am so tempted to start over on my 1980 Camaro
Was up eastwood can you make a video of how to do body lines
Hey Kevin, have you done any episodes about painting candy pearl,do you do the inside jambs and cab 1st ( on a 67c10), painting the whole outside in 1 shot, or hang all the parts in a line and paint separately,
Can you apply body filler over rust converter? And can you apply body filler over gray primer, regardless of the primer mfg?
Do you spray clear or basecoat with 1.7 tip???
Hi EW. What should I put over a firewall smoothie panel that I welded in place. It is a stitch weld with some holes & gaps. Thanks
I think those bondo fumes got Kevin feeling groove.lol
use evercoat or duraglass over weld seams its flexible an water proof
I plan on buying the block sending key that you have. The question is what different sandpapers do I need to start out? I won't actually be signing paint but I will be setting everything else from metal prep, blocking, primer getting ready to send it to the paint shop. I want to be able to buy it by the rolls if possible! Thanks
@eastwoodco
7 жыл бұрын
All the sandpaper you need is at Eastwood. www.eastwood.com/autobody/sandpaper.html
Excellent, love it
This guys the goat
Great instructional video! Thank you. I am the novice DIY guy. I am preparing to prep a 1990 F-150 for a raptor coat. Will the contour premium filler and contour glazing putty work well for prepping for Raptor Coat after I dolly the dents out?
@eastwoodco
10 ай бұрын
Yes! You will need to topcoat with epoxy primer and then move forward with the rest of the prep sanding it and the bed with 120-180 grit.
Kevin is legendary
difference between bondo and filler and the colors is the bondo pink and filler is green when to use bondo and when to use filler thank for ur explanation and tutorials
Hi do you sell 2k primer on spray can? Great video
Hey guys I love these videos.. but I need some help filling over weld repairs. When I weld panels in how do I treat the welded areas? Do you already have a video on it bc if so I haven't seen it yet. Do I use fiberglass filler straight over the welds then primer, or maybe use an epoxy or rust encapsulater over the welds to hold the moisture out then regular filler over that?? I'm familiar with body work other than over these welds. I ask because I've gotten 2 recently with cracked paint/filler over patch panel welds and upon stripping found new rust under the filler lifting it and the paint. Seems to be a common problem and appearantly the diy'ers are unsure and putting plastic filler straight over these welds. Please tell me the proper way asap as I have one to do this weekend and make a video soon. Thanks guys. Btw I'm a faithful Eastwood customer. Love your company.
How would I go about getting trained to work for the Eastwood company so I can become a professional painter eventually because am a novice now trying to learn auto painting.
Do u apply filler on engine? Can u do a video on engine paint with your technique?
I got a 1958 Ford F-100. Working on it
Who needs editing? This is how it's done!
You gotta admit there’s nobody like Kevin Titz. He knows how to explain things like it should be explained. Clear as day.
@Tierone1337
2 жыл бұрын
Titz a legend
Awesome 👍👏👏
how to fix small rust bubbles around my rear wheel well
So when it's bare metal, you'd use Bondo, then epoxy, then 2k primer, then paint?
so on small dents do i need to pull with hammer or can i just use body filler only on small dents?
@frankquinones1695
5 жыл бұрын
Crypto Pirate dings you can just put putty but if you can make an inference that you might be able to make it flatter it will be best the less bindi the better
im trying to findnout what body fillers i should use and what sandpaper i need to use
@eastwoodco
8 жыл бұрын
To discuss your project with an Eastwood Tech so you get all the proper tools and products, please call 866.759.2131....or visit Eastwood.com. Thanks.
Brother man havin fun making it rain
Ok I know nothing about this. I had someone that said they know how to do filler it was only for a small spot where the decals was taken off the side fenders there was 2 holes that need to be filled I watched him mix everything up but he never did take it down to bear metal or even sand it. After watching a few videos. I have found that what he done was wrong. I have already had the vehicle painted how long could this be good for before it fails and comes off. My truck does vibrate from the exhaust and motor.
What's the best filler to use on bare steel? I stripped all the paint off a car to repair all the body panels as well as replace a lot of rotten sheetmetal. While I wait for the sheetmetal to show up, I am working out the debt with a hammer and dolly. Now I need to fill in the small remaining dents and don't have paints to blend into, just bare metal. Thanks.
@eastwoodco
9 жыл бұрын
David Ekleberry You could use the Eastwood Contour Premium Filler or Aluminum-Filled Compound. If you have any pits, don't forget to prep the area with Eastwood Fast Etch, which is going to remove the rust from the pits so it doesn't push back through your filler and paint. Here's a link to the Body Fillers available at Eastwood, and if you'd like to talk to a Tech, you can find info there as well. www.eastwood.com/autobody/body-fillers.html
Are YOU an Eastwood Guy? Check out this video from Eastwood to find out: Dirty Harry Welder Dream - Stop Dreaming & Get A MIG Welder - Are You An Eastwood Guy?
What is the first step buffing or topcoat
Dude awesome I help my God father all the time and I learned so much thanks from Arkansas
@eastwoodco
2 жыл бұрын
Glad to help!
Shouldn't you spray epoxy on the bare metal first, otherwise it will sweat under the filler and rust?
hi. I mixed and applied bodyfiller with the hardener and I guess I didn't add enough hardner to the mix as it did not solidify and remained pasty. is there anything I can do to this to prevent me from removing all the material and starting over? How do I save all the product already used?
@eastwoodco
9 жыл бұрын
Aldean Louis If it didn't harden properly, you will need to remove all of the filler and start over. Check out this video which may help: kzread.info/dash/bejne/m2aupcuyftiep7g.html
@frankquinones1695
5 жыл бұрын
Heat throw some heat on it maybe it’s to cold.
Or you can use Bondo over epoxy but it has to be within a day or 2?
Can someone List all the Fillers mentioned in the Eastwood Video?
Groovy stuff, you are not that old.:>)
How about investing with this awesome products in Sudan Africa?
I just like to say is I have watched. Many videos on how to do a good job the right way you are the best I like the way u teach/like your sign says Do the job right. thank u
@eastwoodco
6 жыл бұрын
Thanks. Love to hear from Eastwood Guys!
got car painted and they got overspray on my exhaust.. How can I get that off?car painted black and they didn't tape off the exhaust underneath.. can see black splatter on exhaust, how can I get that off??
@FarikoPacer
7 жыл бұрын
WPGinterceptor lacquer thinner and a rag or clay towel/bar and water
make it rain baby!
I am working on body filler now. Been working on a quarter panel a couple hours a day for a few days now. I won't have a chance to work on it for a few day so I went over the area I am working on with self etch because there is exposed bare metal. Will sand it off when I get a chance to sand that area again. Is that an ok process to do so I don't get rust on exposed metal?
That's skills I need
I have a bad habbit of taping off the area I'm working on
Every time I mix body filler it set up really fast take a filler put it on the metal tray after I mix it put it about the size of a sauser put harder a little less than half the sauser. Across one stream by time I get it mixed its all ready setten up i even tried less harder same thing
Kevin is a great teacher. #covid192020
once the bondo has been layed down on the surface do you want to add primer right away before you add base
Great videos!
Cheers guys
81 firebird. What would you use on the bumper front and back? I'm sure it's the flexible filler but gotta ask the experts
@eastwoodco
9 ай бұрын
Those bumpers are really good at holding their shape or bouncing back with a bit of heat (even just leaving in the sun on a hot day). You can still use standard body filler like our www.eastwood.com/eastwood-contour-premium-body-filler.html if it's kept thin and on non moving parts. Or if your bumpers are really out of shape consider getting some fresh ones.
Can these be used to hide defects before Powder Coating?
@eastwoodco
3 жыл бұрын
Remember, generally speaking curing powder requires heating part to nearly 400ºF, so you would need a specialty filler which can withstand that kind of heat.
Kevin what filler is good to fill a hole on a metal bumper? do I clean it first ? with what?
Lacquer thinner works to clean to
Any other Bondo mixers
Is that OJ Simpson house guest Kato Kaelin?
Please come to us eastwood 😢😢😢..
✨Make it raiiiin✨
Who’s here in 2019?
@summersky77
4 жыл бұрын
Hello from the future.
@Imwright720
4 жыл бұрын
Me
@bengee2902
4 жыл бұрын
Not me
@johnnytightlips6407
4 жыл бұрын
2020 bro
@USMARINE212
3 жыл бұрын
I wish I could go back to 2019....