How to use basic 3D pen
Тәжірибелік нұсқаулар және стиль
The basic and cheap 3D pen. How to use the pen and draw
How to repair 3D pen: • Repair fix basic 3D Pen
Compare tools for 3D pen : • Compare the material o...
Make with 3D printer: • Tinkercad + 3D modelin...
#Eunny #3dpen
Пікірлер: 439
How to repair 3D pen: kzread.info/dash/bejne/dpaN09qmpZrcmKQ.html Compare tools for 3D pen : kzread.info/dash/bejne/qIx4089udde4ktI.html
Thank you so much! I got a 3D pen for Christmas and I had no clue how to use it. Until I came across a video that has the exact same 3D pen as mine. I clicked on it and now I can watch the video with my mum and we can make loads of things! Thank you so much!
Thank you so much! My 3d pen that my mom bought me just came 5 mins ago and this really helped me alot!! 😍
@averagegamez240
3 жыл бұрын
Literally same situation
@jplartandcrafts2455
3 жыл бұрын
Me tooo
@charudogra320
3 жыл бұрын
Omg litterally same here
@ramshiv2385
3 жыл бұрын
What's the price of dis pen
@galibamir1926
3 жыл бұрын
Same
Thank you I got my 3D pen today and after watching this video with my father I can use the 3D pen
@kenyettakilpatrick7956
Жыл бұрын
El gobierno de estados de la
This thing just came. But when I tried to turn it on it was difficult and when I hold the up arrow it turn on and say PLA it and when its green it turns off
Batane ke liye thank you
OMG, Ty for making this vid this really helps me alot bcs my mom or auntie will buy me 3d pen in my birthday bcs my birthday is almost here or in christmas Ty very much for making this video and im turning into 9 so ye also stay safe guys!
That really did help. Thanks a lot!
Thank you for telling about the 3D pen
@DDDLab35
5 ай бұрын
Thank you too :)
For some reason mine doesnt make noise pr shoot out filament when I press the button, what should I do about that?
This helped tons thank you so much!
This really help me a lot tysm
OMG TYSM TOMMAROW IM GETTING ONE FOR MY BDAY AND THE INSTRUCTIONS WERE NOT UNDERSTANDABLE BUT THIS TUT HELPED SM THANK UUU
Thank you so much. It’s great to me. Thank you thank you thank you thank you❤❤❤❤❤
@DDDLab35
5 ай бұрын
Thanks too!! Enjoy your making 😄
Thank you 😊
Thankyou for telling 💞🙂
Thank you! I couldn’t remember how to preheat it because I lost the cord 😜
thank you so much for the rules
This help me a lot thank you
Tysm I just got this today it is my birthday I was so confused this helped me a lot!
Ty I have the same exact one but the pink color it really helped me
@vridhisastheticgamer1849
2 ай бұрын
sameee
Do you have any tip on where to buy the PLA in bigpack? =)
Thanks I can do my project now :D
Thank you so m
Thank you so much😊❤
Tysm!!! 💖🤩 this helped me a lottt!
Mine doesnt turn green whenever its done counting, it just goes back to PLA. What should I do?
@stabvrse
2 жыл бұрын
change the plug i had the same problem
Thanks buddy! It helped! 🤜🏻🤛🏻
@DDDLab35
4 ай бұрын
great!
i looked at a lot of vids but this was the most helpful
@DDDLab35
10 ай бұрын
Thanks ☺️
Hi, any idea why the pen won’t heat up. Only just opened it from the box and trying to select pla but then nothing is happening
I just bought a new one so thanks for teaching
my sister ordered it for me and it really helped me to use it
@DDDLab35
Жыл бұрын
Thank you :)
What's the best platform to print on, everything I try to print on just slips and moves around too much
thank you
Tysm it really helped im just gonna buy filaments for my 3d pen
My 3D pen did not work but your video is really helpful because I understood the basic steps
@peridotgaming5894
Жыл бұрын
Mine doesnt work either
Thx I had my pen for 2 years and I didn't know how to use it so thanks
do you need to use it while it’s plugged in to the charger?
Thanks 😊
Thank you se much now I now how to make and play with it
Love it!
Thanks
how do i get rid of the FLA? its stuck in my 3d pen for along timw now
Thankyou for helping me to use 3d pen😊🖊️
@kiranagrawal6582
5 ай бұрын
You said it very correctly
@DDDLab35
5 ай бұрын
Thank you
@Gaza21841
2 ай бұрын
@@DDDLab35bro i keep trying but it keeps giving me ERR
Thank you 🙏
Thankyou for helping me
Ty so much!!!!
Thank you very much
Thanck you very much for help❤😊
Can we take out the plug when we use
Does anyone knows what the blinking red light means? Just bought 1 online and when we tried for the 1st time, while it was still heating up it reached upto 181 then the red light started blinking and the lcd shows "SOS" What do I need to do to fix it?
Thanks I'm going to get my 3d pen in the week 😀😃😃😀😆
@DDDLab35
10 ай бұрын
Gooood~~~
Thank you 💗
I dont see speed flow difference when I slide it left or right. Slow speed is when the slide is left or near the tip?
Thanks for the help
Thank you, just got this pen and have been trying to use it, but by watching this video it has shown me my pen is defective. Thank you.
@pedrito18
11 ай бұрын
Ajajajaj So mine
Thank you so so much for the useful video🎥
Thank you!
Mine does not adjust temperature when you plug it in a push the left button. What am I doing wrong?
Thank you very much this video is very useful ✨😍
@DDDLab35
21 күн бұрын
Great!!! :)
I just got my pen that looks like this and it turns itself off. The lcd doesn't stay on after I tap to preheat after selecting PLA. Could it be DOA?
Thankes
Thank you so much..but i m not getting the thread you put in it
Thanku
Thank u a lot
Thank you chief!!
Thank you so much❤
@DDDLab35
5 ай бұрын
Great!!
*THANK YOU*
I already got my 3D pen and it was charging and I touch The bottom I feel like pain and I try use at my Dad and he crawls around and he at the back Pls tell about the bottom 3D pen
I love 3d pen
@madhu123ification
Ай бұрын
Thanks it helped me a lot. I am really very thankful to you 😊😊
Thank you so muchhh
Thank you so much 😊😊
@DDDLab35
6 ай бұрын
Good luck 👍
Umm my is clogged and doesn't force out. Help? Any tips?
Hello which material we need to use thT we are nt getting
Tysm I have not used my 3d pen in a long time so I forgot how to use it
Thank you!🎉❤
@DDDLab35
5 ай бұрын
You’re welcome ☺️
Good
Can you help me? I just Bought a 3D pen and When I First Try It , it was Ok and I let it sit for about a Min and when I wanna try it again It Got reset back to PLA And When I try to push the button it only Came out until Number 176 and It got Back To PLA Plsss helppp
Thank-you! This was a great video. Going to try my pen out today.
Thx very helpful
After I preheat the pen and the light turns green.. and I press “load filament” the whole preheating process just restarts HOW do i fix THIS?
everyone that has a 3D pen while me waiting for my dad to bring me a 3D pen and me being embarresed
@omarwasfat4850
2 жыл бұрын
Me too, but I am not sure if everyone have a 3D pen
@IhaveADD_
2 жыл бұрын
Sad 😔
What if it blinks orange nonstop and you unplug it but it still doesn’t work
Ty my dad got me one when it will come it help me a lot
My old 3d pen got the fill thing stuck and I can’t use it anymore because the fill won’t come in and out how do I fix it? I got a new one but different brand and I couldn’t find any instructions and it was Chinese, it’s like a smooth pen and no temperature change, up down or anything just buttons on play and stop T-T
Thank you so much it help me alot now i can use my 3d pen i got its blue
Thank you 👌🏽👌🏽👌🏽😃😃😃
I need help - my father bought 3D pen for me 2 days ago so today i watched your video I did everything step by step but when I started the preheating it shutdown by itself Can you plzzz tell me the problem in it
Thx im going to buy this 3D pin
Tysm! :D
Thanks ❤
@DDDLab35
10 ай бұрын
Thank you ☺️ too
Its not working i put the filament in but when im trying to heat it up it flashes and says pla and then when i press the button it says ab5 i think
Tysm it was my bday yesterday I got this as a gift this vid rlly helped :)
Thanks ❤️❤️
my buttons dont work, its flashing red and smoking what do i do, the filament wont come out either
thanks
i liked the 3d pen 😮
Omg tq so much!
Thank you soo much for dis video
Thanks it helped