11 yrs later this video is still very much needed and appreciated. I was so confused as to how to get my drill bit pieces secured into the housing of this drill. Thank you Thank you Thank you

68 yo and old school. used a chuck key all my life. I got a super deal on this drill and case and was about to order a manual. Thanks some much for the instruction. Made my day,

@Antlerdreamer

11 ай бұрын

Definitely remember the old school chuck and key drills

Omg thank you. We have felt dumb for over an hour trying to figure out how to get the bits to attach.

@drdwgmd14

4 жыл бұрын

what an loser you are!

Don't use mine often, couldn't remember what the numbers were for - such a nice simple explanation of the whole drill. No messing around, no wasted time. Thank you!

@Antlerdreamer

2 жыл бұрын

Good to hear the video was helpful, thank you for the comment

Thank you so much! I have been fumbling around with this drill for years and never really knew it's capabilities. Plus you are a good teacher--nice voice.

thank you, it took me more than 2 hours that i still could not figure it out by myself. saved my day. btw, i am software engineer, i feel so bad now, i know nothing about real world

We just bought a 20V DeWalt Drill - So excited to have something with more power for DIY jobs! Thanks for this quick lesson! Appreciate it!

Thanks for explaining the numbers on the clutch. So many videos skip or barely say anything about them. If they do, it sounds like they are saying it's also like speed when it is not.

Thank you for the demonstration. I am perhaps the only woman who's first truly exciting purchase as a newly single person was a 20 volt Dewalt drill!

@Antlerdreamer

10 жыл бұрын

Good luck, enjoy your drill. Thanks for the comment.

@htboston

10 жыл бұрын

Antlerdreamer Thanks for the tutoring, man. It was very easy to understand and listen to. You should be a DIY teacher lol. I know how to use my 9.6v power drill more effectively now.

@b.baxtermatheny4517

9 жыл бұрын

Elizabeth Schneider Are you aware that DeWalt's 12 volt drill has a size and handle that better fits a woman's hand?

@MsNotch50

8 жыл бұрын

+B.Baxter Matheny She will do just fine with a 20v! I'm a female owner of 20v Dewalt drill and Impact wrench. I use for house hold items and work on my car builds, never once had a problem with them fitting my hands or holding for long periods of time.

@bluemantom77

5 жыл бұрын

@@MsNotch50 I agree. With you 💯% women can. Do whatever they want as a father of two daughters I. Teach. To be. What. They want. Don't give. Up

For some reason you have explained to someone who has newly acquired a DeWalt in simple terms how to put the bits in. Fantastic, nobody explain ed this so clearly. Cheers

This video was very helpful! I needed to know how the clutch works and you explained it well.

Thank you, a very useful tutorial for a person who never hold a power drill in my life

@Antlerdreamer

3 жыл бұрын

Grace Paddington Appreciate the feedback/comment Welcome to the Dewalt family

Thank you so much for making this video! My niece & I were trying to fix a cabinet door hinge, and this *visual aid* was so much easier to understand, than trying to read back & forth through all of the directions!

Excellent video, better than reading the manual for the last hour.

This is the most easy to understand video so far! Thank you!!

Just bought my first drill and I had no idea how to use it. thank you so much !!!!

@Antlerdreamer

4 жыл бұрын

Great to hear it was helpful. Appreciate the feedback

@sarak5882

4 жыл бұрын

elainejan - Same here! I have the magnetic bits and have absolutely no idea how to use/install them. I was so happy to have purchased a “Real Drill” until I went to put the bits in. I gave up, everything is back in the dewalt bag😔

thank you! Quick and to the point.

Thank you I just got one of these as a first time home owner and the directions were worthless this is so simple!

Thank you so so much! I was just gifted this drill and driver set! I was never taught any of this and I had no idea about a clutch and speed option on a drill. I appreciate you teaching me a new life skill!

Best video yet to show how! to install the bits. Thank you!

@Antlerdreamer

4 жыл бұрын

Appreciate the comment. Great to hear it was helpful

@mortalkombtmastr9239

4 жыл бұрын

@@Antlerdreamer What number should I use for about 2inch screws into wood if i predrill small holes and when I drill the actual screw? I just want my drill to not get over strained and last.

Omg thank you this is exactly what I was looking for. Made it super easy to work.

No manuals with Second hand tools. Great explanation And video Thanks

Thank you so much! My mom seriously just showed me how to do this before she went out shopping, but I already forgot! Plus this was a lot easier then doing it the way she did it!

thank god for this video. 'cause I was seriously going to snap in 0.5 seconds :p

I love this video it's nice to know exactly what everything does.

Thanks for this clear, simple and to the point explanation. I will be saving this and watching again and again until I feel comfortable and confident with my first drill.

Really helpful tutorial since I don’t use this tool much.

Thank you! This is absolutely what I needed. Hope you are doing well. Thanks for this information. Blessings!

Glad there are videos like this out there. Thanks for taking the time to post this!

Thank you , thank you, thank you, so much for this. To the point, easy to understand and reasonable time spent!

Thanks for something simple and understandable. I need all the help I can get as I teach myself how to do it myself. 👍🏼

Excellent question. I wouldnt recommend changing the speed of the drill during operation. Choose a speed before you decide to drill and stick with it...there are gears in there that can strip if forced to hard. Hope that helps

Thank you so much for this informative video. It really cleared a lot of things up for me. Esp the number settings. Once again thanks!

Thank you so much for this video as I thought my drill was broken. I couldn’t figure out how to insert the drill bit tightly until your video explaining the reverse settings etc. now I can finally install my ring cam and everything else that I’ve needed a drill for that I’ve put off. 💕

@Antlerdreamer

2 жыл бұрын

Great to hear!

Thanks for being straightforward---clear and thorough. happy to having found your video.

Good job . Clear & helpful

Thanks for posting. Very useful information

Found this really informational! Thanks!

nice job.. your video and explanation was really great!!! I've learned a lot.. thanks

this is a really helpful video for anybody first time using the drill tool. thank you

I got mine and just follow your advice. Thanks for sharing

Thank you for the explanation!

This was clutch, thanks!!

Thanks! I wondered about those numbers Newbie here

@Antlerdreamer

4 жыл бұрын

Great to hear the video was helpful

Simple and efficient. Great speaker!

Thanks, just what I needed, great video

Thank you so much! Just what I needed!

Thank you! Very helpful.

Cheers mate; really helpful video.

Very informative and right to the point. Thank you sir

good video, well explained, thanks for that bro

Thank you for the feedback.

Helpful video, thanks!

Thanks! This is very helpful!

Thank you, just what I wanted to know.

Thank you, so helpful.

So helpful, thank you!

great vid trainig to be an installer n this really really helped

God bless you; I had never used a drill and was wondering how I would fit the bits.

Thank you!!! Such a useful video. X

very useful for new person...

Thank you! Subscribed just because of this video lol.

Thank you, appreciate the video

Thanks for the help...

Appreciate that I am gonna be workin on a project so u know

thanks for this video :) i have this exact drill and need to hang some stuff today!

Thank you!!

thank you !

Good video! What speed would you recommend to drive into metal?

When I ran a #6 1-5/8 screw clean through a piece of pine, I knew that I had no clue how to properly set up my DeWalt. Now I know, and unfortunately, no excuses...😅😅😅

I had my boyfriend watch this video after he almost destroyed my drill driver, so he get's it now! LOL!

@TM-tz9rr

4 жыл бұрын

MsNotch50 you have a girlfriend

Been using a drill for 20 years. Never realized the 1 2 switch on top was speed adjustment. That wouldv'e been helpful info 15 projects ago.

Thanks

Thanks!

OMG THANK YOU SOOOOOOOOO MUCH!!!! I FEEL SO MUCH BETTER SEEING THIS VIDEO I WAS LIKE WHAT IN THE WORLD IS THIS, WHATS THAT MEAN LOL SO THANK YOU AGAIN #FIRSTTIMEDRILLUSER

Handy video, nice one. On a different note, can i use the batteries from my 18v DC100KA-GB combi drill ( the batteries are 1.3Ah ) on a 18v DC330N jigsaw?

Update!!! Chuck jaws were extremely rusty. Used WD-40, let it sit for awhile and now (I think) it is working like it's in good shape!!! I am thrilled!!!

Thank you!!! I was lost.

@Antlerdreamer

4 жыл бұрын

Good to hear it was helpful

thanks

Thanks so much i was really curiouse about the clutch i thought my bosch was broken

Thank you

Very helpful, cheers Antlerdreamer

amazing

My drill bit is constantly slipping and sometimes gets stuck in the wall, any advice you can give would be appreciated.

Good video

you explained it like 90 % but it was iffy on the turning part where you hold the clutch

The instruction manual I received with my DeWalt Cordless drill says not to attach a drill bit in the manner that you demonstrated as you could do damage to the drill,(just saying) although I do it the same way you do

I appreciate this video but I can't get mine to work like yours.

The manual says 1 is high, 2 is low. Reviews all say the opposite. I've been using this Fri for five years, still can't tell any difference between the two.

@jonbetts8473

3 жыл бұрын

1 is high *torque* and low speed. 2 is low *torque* and high speed. 1 tends to be better for driving fasteners into hard woods or more precision, 2 tends to be better for drilling or speed work

I can't move the chuck jaws. Any advice?

I have a dewalt corded drywall screw gun. the clutch stops the bit from turning with the least bit or resistance. any ideas on how to repair. doesn't matter what the setting.

Cool thought my drill was bucked

What if I have it set on drill but it only runs for a second then stops?

The basics. Perfect. It's not common sense to everyone.

@Antlerdreamer

3 жыл бұрын

Appreciate the feedback

Ive always owned Dewalt drills and not ever run into that problem. I would see if you could sent it back and it it either replaced or refurbished. Thank you for the feedback and the comment

@bluemantom77

7 жыл бұрын

i wanted to ask is this a good drill for diy use i am going to buy a used one i get to test it first only $10 two batteries charger hard case its a newer one of the one you got in the video ebay i can buy two new batteries from a us seller for like $30 for two and from videos on hear i should be able to change out the cells for new one into the dewalt branded batterie case i did have a older black & decker 14 volt ni-cd that its not worth to buy new batteries for i did buy a new drill a hyper tough 18 volt ni-cd that dont have the power i need but at like $20 with tax am not going to bitch

@Antlerdreamer

2 жыл бұрын

Good to hear it was helpful. Appreciate the feedback

I had no idea how to work this and construct my mom's bed as shes yelling at me telling me idk shit. After watching 1 minute of this she is rushing and that noise starts but she thinks it's all good. In the end I did it but shes just so stubburn to acknowledge

Question...just got one of these, and being a curious dumbass, I tried to change the speed while I was running the drill, resulting in a pretty nasty clicking noise. The drill still seems to work fine, but should I be worried about long term damage?

Stupid question but can I use a craftsman drill bit in a dewalt drill?

@Antlerdreamer

3 жыл бұрын

Yes, shouldn't be an issue.

it the number on the clutch in Nm or in inch pounds??

@Brian-li2qk

7 жыл бұрын

is**

I hear No Sound on this; Love my $159 Logitech G933 headset.