Thank you! Was having some issues with my printer and this actually managed to tell me this issue and helped me fix it.

You made that so straightforward. Thanks.

Thank you for your help sir!

Sir, you are a fing genius. I got an Ender-3 V-3 SE and it crapped out on me after I printed one thing. Your video relieved a lot of frustration for me.

@3DRundown

Ай бұрын

Thank you friend. Awesome to see you get some sh*t sorted!! Hit up my FB groups if need some help

People, I updated the screen and then the printer. It turns out I used the same memory card for both updates. I didn't get a blue screen, but everything came out in Chinese and in several languages overlaying everything. In the end, I formatted the microSD again and installed the screen update again, then I used the SD card that comes with the machine for the firmware and it worked perfectly for me so far.

Bro you are the best thanks for your help and video

Muito bom o vídeo, estou estudando como funciona a maquina e pensando em comprar está impressora, me chamou bastante atenção, obrigado pelo vídeo

@3DRundown

27 күн бұрын

Get the KE, not the SE

Gracias 👍

I did this earlier, and the LCD said it was updating and was always stuck at a certain percentage and would not complete. I then tried a different micro SD card and formatted it to 4096 allocation size, then copied the folder over and tried it again and it worked.

The screen update went as planned, but I’m still getting the blue screen with no Creality logo when booting up the printer. After o my a few months, I guess I need to toss this one in the trash!

@3DRundown

3 күн бұрын

Not following.... You want to toss an SE in the trash over a FIRMWARE update issue? Just spit balling here, but, sorting out the firmware update, sounds like a better game plan. Or, putting a Nebula Pad on it.

Are there any benefits or added features to the update? My SE has been running great since xmas and I'm not sure I need to update. thx.

@3DRundown

Ай бұрын

I don't know the specifics, but, Marlin and Klipper, are both under active development, and, I would very much want to keep Marlin up to date. Creality tends to fall behind as it is. I'd update it.

Is it possible to modify firmware on SE to allow printing at 300C? I have replaced the heater with 60W one.

@3DRundown

2 ай бұрын

You could put the Nebula Pad on it, which will give you Klipper.... Then anything is possible

Question, the nebula pad can also get printfiles via wifi or lan, rather than annoying usb stick or sd card swapping? Second question, is the Creality Sonic Pad similar to nebula, re wifi and/or ethernet?

@3DRundown

2 ай бұрын

Both are The same. Sonic handles 4 machines. Nebula 1. They are Klipper. Everything is done wirelessly. K1, K1 Max, Ender 3 V3, Ender 3 V3 KE, CR10-SE, come with it.

@WernerKaffl

2 ай бұрын

@@3DRundown yeah, we sell K1 and K1 max in our shops. Though they call their Klipper "Creality OS", in violation of the GNU license, which I found a bit strange. Thanks for your reply, I believe Nebula should be the way for me to upgrade since I can't do multiprint anyway (2 more printers, fron 2 different companies)

@3DRundown

Ай бұрын

Meh, I don't lose sleep over that stuff, but some people do... Nebula is a good call.

Hey, are there any new features or anything worth the effort on this update?

@3DRundown

2 ай бұрын

I haven't found a change-log for it. But, keeping up with the latest version of Marlin is a good idea. Creality tends to fall behind, and it's good to see them at least keeping up somewhat

@agustinsaenz2581

2 ай бұрын

@@3DRundown yeah, it definitely it's behind, I just got a v3 yesterday. I have a v2 with Mriscoc firmware installed and it it's LIGHT YEARS better, than the stock firmware on the v3. Can't wait for developers to make the cool stuff for the v3!

@3DRundown

2 ай бұрын

Your V3 should be running Klipper...

When doing the leveling, only numbers appear and not the leveling data as shown in the previous version, however when editing the leveling data it does show the information of the points where you level with the cr-tocuh?

@3DRundown

2 ай бұрын

You don't need to EDIT the leveling Data. It will create a mesh, and use that mesh, to adjust your 1st layer

@johanflodkvist80

2 ай бұрын

Does the bed leveling work better running this firmware over the 1.0.4? I run 1.0.4 and need to edit the grid to get a good first layer on some spots on the bed.

@alanmendieta2628

2 ай бұрын

@@johanflodkvist80 The same thing happens to me, the automatic leveling is very unreliable even after having leveled it manually, it usually changes the leveling by itself, that is, maybe in one print the first layer is perfect, but in the other with the same file it is slightly a little higher which can generate small gaps in the fill lines of the first layer, and I always have the doubt if the cr-tocuh is working as it should.

@3DRundown

Ай бұрын

Does your GCODE have M420 S1 in it? So far, my SE hasn't had any issues with 1st layer

@johanflodkvist80

Ай бұрын

@@3DRundown yup, M420 S1 is present in the gcode. I guess our beds are just less flat than your bed 🙂 But Im looking forward to upgrading the firmware to see if that improves things.

I have a problem where it seems to be stuck on the "Auto Z offset in progress" screen. The "nozzle heating" icon is not blinking, and no parts of the printer seem to be getting warm. Do you know what the issue might be? Or what I can check? I have tried multiple times reflashing the firmware to both the screen and the main board. Still no success.

@betterdevils8734

2 ай бұрын

Same, but for some odd reason, images and text don't show up.

@johanflodkvist80

2 ай бұрын

Read some people who had similar issues when not using folder/not folder correctly. And some that need to rename files because of the filenames are too long.... Not tried this myself.

I have an ender 3 pro and just installed the direct sprite extuder. Im having trouble with my prints now. Any chance you could help me out? I would greatly appreciate it.

@3DRundown

2 ай бұрын

Elaborate....

@ajstrong1

2 ай бұрын

@@3DRundown after installing the new extruder and nozzle, the infill isn't connecting to the walls. It's stopping slightly short

@3DRundown

2 ай бұрын

You went from Bowden to DD. Be sure you've got the correct Nozzle Size installed, and set in your Slicer (I assume 0.4). Retractions need to change. Sprite will be 0.8mm/45mms PID Tune, if your firmware allows Set your Esteps to 424.9. But, you may need to calibrate that manually to dial it in. I don't usually find that necessary

@ajstrong1

2 ай бұрын

I changed the e step and retraction distance already. I can't remember if I changed the speed or not. Could it be the slicer or firmware on the printer?

@3DRundown

2 ай бұрын

I assume you are adjusting your speed based on what's best for each model. Have you tried working with your flow rate? Trying different infill? More walls? The usual suspects? Perhaps estep value is not working out? Flow rate is too low... Experiment with some small test prints.

Hello, I tried to update the firmware but it appears in different languages really strange. I also tried to use different sd cards (clean ones) and still doesn’t work, any help please?

@3DRundown

Ай бұрын

Should be an English version to DL. If not, you should be able to navigate the firmware to the language select screen and switch it to English. Maybe can find a video that shows where the language option is, so can follow in whatever language your seeing

can the wifi box 2.0 do updates o/a ?

@3DRundown

2 ай бұрын

You bet. Hook it up, and push the firmware from Creality Cloud. It's super.

@Mr360alan

2 ай бұрын

@@3DRundown thank you so much

@Mr360alan

2 ай бұрын

@3DRundown can you do a video of show how to fix the gearing of the Extruder I think I said that right.

please help, going grazy here, i followed every step to the letter up to the firmware, but the languages options on the display do not have english and has lots of chinese things, please help

@3DRundown

10 күн бұрын

There should be an english version of the firmware, or a multi-language. Can def change it, if can navigate to the language section

@davidromo2914

3 күн бұрын

@@3DRundown thank you

So my problem is I have a Neo3 and I have a chromebook. I updated the software, and it says I have no files on my SD and so the company gave me another file and it still doesn't recognize the file. I unzipped a file from another file and put it on the SD but it still doesn't see the file.

@3DRundown

Ай бұрын

Need a memory card, 32gb or less, formatted in Fat32. Make sure have the correct file, on the root directory. Rename the file to something else, before trying again

@richardmolano5538

Ай бұрын

@@3DRundown then it'll work on the chromebook?

@3DRundown

Ай бұрын

All you need, is to put the file on the card... then the card goes in the printers, so, can use whatever you like, as long as the file gets the the card.

Got a frozen blue screen tried updating firmware and still frozen screen

@3DRundown

2 ай бұрын

Did Screen and Mainboard? Memory card is 32gb or less? Formatted in Fat32? Rename firmware file before trying again

error code 0500 ender 3 key 2022 that is what my ke keeps popping up this lol

I'm so disappointed with the UI of this machine. It does so many things automatically, and you have NO chance to intervene. I can't believe the latest firmware update was in october 2023

@3DRundown

16 күн бұрын

It's running Marlin, and you have total control. What issue do you have with it? Consider a Nebula Pad for it.

1st :)

@3DRundown

2 ай бұрын

🏆