Check out Odin's new lightsaber build on Odin Makes: kzread.info/dash/bejne/mYWJrNWGlbK1qqQ.html

"I can switch out for a red LED when I decide to go Sith" 😂😂

@jasperbayless

4 жыл бұрын

"And now you will be called Darth Odin." Time to switch the LED!

@shutupzach5759

4 жыл бұрын

Keep the younglings away from him 😳😳😳

@smallboto

4 жыл бұрын

Bethany Colors That’s only if you bought Jedi fallen order

@gamersforlife3440

4 жыл бұрын

@@shutupzach5759 Nu u i kill them all ez vader incoming

@claytonj2695

4 жыл бұрын

Benedict Arnold HA more like Benedict Anakin

Instructions not clear - so I finished making this last week when all of a sudden a storm trooper burst through my front door, he said he was looking for a couple of droids or something I don't know. I told him the droids I have are not the ones he's looking for and to get the hell out! He called me 'rebel scum' which wasn't very nice at all, he then picked up his blaster and started shooting at me, I had just finished my 'battle ready light sabre ' but the damn thing didn't work, all it did was move around making swooshy noises. I mean luckily his shots were way off target but for a second there I thought I was in some real trouble! Thanks Odin 😉.

@A-AronX

6 жыл бұрын

Dorian Gray ????

@jdk3096

6 жыл бұрын

Dorian Gray my good sir, I had the same issue. I was hanging with my youngling friends when some guys started shooting up the place! Then our friends, Master Skywalker, came in and tried to kill us! I had my combat ready lightsaber, but all it did was get cut up by his real one! Luckily I escaped, but my friends weren’t so lucky.

@s0uzi37

6 жыл бұрын

Dorian Gray this is not lore friendly you clearly don’t know much about storm troopers

@NotXboxiie

6 жыл бұрын

Dorian Gray.... made my day!

@benjaminjude12

6 жыл бұрын

FUNNY!!!!

And I thought Minecraft Redstone was hard

@brickbytar8715

4 жыл бұрын

Gaming Weeb relatable

@kelp4407

2 жыл бұрын

From an electronics standpoint, its actually kinda simple, the connectors and the drivers aren't completely necessary, just convenient

@galacticquasar9944

Жыл бұрын

@@brickbytar8715 gweeb

"Wish I had this when I was a kid" Thats why we all do this mods, we are never too old to have fun 💜

I am too stupid to work with all this but it's still fun to watch

@rokdri9983

6 жыл бұрын

if you really think you cant cut and soldier maybe, so just try it, i tried it and turned actually pretty well and i dont have experience so no, pretty easy bro

@TheCholoGeek

6 жыл бұрын

Rokdri update turns out you were right, I'm a pendejo but I can still make this

@wnerko7484

5 жыл бұрын

this dude is pretty smart.hard for me but this guy knows his stuff.2nd nature.genius

@manzarhussainjafri7288

4 жыл бұрын

*Self Destruction 100*

@SirDankleberry

4 жыл бұрын

Grug no understand sparky sparky.

I see you have constructed a new light saber. Your skills are complete, but you are not a Jedi yet.

5:38 While I'm not really an electrical engineer, I figure putting heatshrink around a transistor like this would be somewhat dangerous, as you're completely isolating the heatsink on the back of the transistor from any airflow whatsoever, which risks it overheating and damaging the component, and possibly burning the tubing (if it gets that hot).

I love how clean the work he does is. shrink wrap can never be over used. Great video!

How to turn a Toy Lightsaber into a Combat Ready Lightsaber Step 1. Make a combat ready lightsaber. Step 2. Alter the internals of a toy lightsaber, and meticulously put them into the combat ready one you already had. Step 3. Never realize that the combat ready lightsaber is permanently on Demo Mode. Complete.

@gamersinacontainer

4 жыл бұрын

How do you take it off demo mode?

@tescocarpark1084

4 жыл бұрын

@@gamersinacontainer you can't, it's on demo mode permanently

@gamersinacontainer

4 жыл бұрын

@@tescocarpark1084 I mean before taking it apart.

@tescocarpark1084

4 жыл бұрын

There should be a switch on the top of the lightsaber

@tescocarpark1084

4 жыл бұрын

@@gamersinacontainer if not then its stuck on demo mode

This is more complex than transformers (like me) themselves!!! Literally, how are you so smart???

Man. I cant think of a video that I watched that had this much content where was utterly and completely lost. You did a great job explaining what you had and what you were doing. I just dont know any of this stuff. Enjoyed it though.

Just wanted to say this is a fantastic video. Excellent skill and know how to wire sound to your own lightsaber. For anyone who is interested - I just ordered an Ultrasaber mystery box for $75 (because I didn't want to take the time to make my own). I plan on getting a saber without sound (probably going to happen with the mystery box) and using this tutorial to mod it with sound from a blade builder. I know ultrasaber does not want you to do this, they want you to send it in and spend a ton of money, so I'll post my struggles when I get the blade.

Thanks a lot for sharing this kind of content for free! So informative and I now feel like it's more within my current budget to build my custom sabre. Now to start designing my hilt... :D

Is it just me or is this video a "how to install a soundboard from a toy into a combat ready saber" and not how to turn a toy into a combat ready!

@notoriusc

6 жыл бұрын

scott mcclary I was thinking the same thing

@razieltalos

6 жыл бұрын

yea it seems more like he sourced parts from the toy instead of attaching the blade and guts to the toy hilt

@philippniemann8842

6 жыл бұрын

I had the same thought process

@VincentGonzo

6 жыл бұрын

100% agree! Rather than use the actual toy he jus gutted the damn thing and reinstalled it into his already made one... the hell. I was hoping this would help me fix my Obiwan lightsaber. the blade is gone but still functional.. I want to mod it with a green light and use it. Title misleading but possible ideas can come from this. like rewiring the inside with a new led source. and buy a Kyberlight blade for $20.

@nathanhills336

6 жыл бұрын

Yeah I wanted to do the same thing with my toy lightsaber

I've been looking for a video like this for SOOOOOOO LONG and this is amazing

Thanks so much for this, I was going to use an old Hasbro sound card for a custom saber swell, and this really cleared stuff up for me!

@OdinMakes

6 жыл бұрын

You are very welcome!

@tabitharyan1243

6 жыл бұрын

Odin Makes You should be careful to not profit twice off of one video, you could get in some trouble. just don't monetize it on two accounts and you're alright but just a heads up.

@jenniferma9713

6 жыл бұрын

TABITHA OSBORNE why would he get in trouble by commenting on a video twice? He is the real guy he has 128k subs.

@Rastcao1984

Жыл бұрын

@@OdinMakes i am a little behind on the times, but am going to try this. I can’t find the micropuck 1425 and am not sure what amperage to choose can we get a list of compatible parts so we done melt the system?

I'll call it "combat ready" when it slices through stuff like Luke's does.

@chubbyninja5026

6 жыл бұрын

Rick Jasper go to the hacksmith den he made a proto saber that burns through steel

@Marcus51090

5 жыл бұрын

VortexDoez that was fake and any scientist or engineer will tell you this

@paladinjukes1531

5 жыл бұрын

@@Marcus51090That was not "fake" it just wasn't properly functional nor a real Proto saber as it uses a tungsten filament with a titanium bar. Its more of a super heated metal club, but it does in fact work

@Fi_Sci_

5 жыл бұрын

Marcus W You should watch the Full video on the HackSmith Protosaber Instead of jumping to conclusions mate

@jameschristian1664

4 жыл бұрын

Bros this comment is 2 years agoc

This is really really helpful. I saw the first video and was all over it, but knowing that I can do it like this instead kinda makes this even better.

Very detailed and very thorough. Wayyy glad I watched this before jumping into deconstruction

That was awesome Thank you so much for making and Posting this amazing video May the force be with you, ALWAYS...

Awesome video! This was really cool seeing how much you charged it and I can’t believe you did so well!

Love the video. I have been doing this same style for 4 sabers I have built and many more to build.

@Snypersystem186

5 жыл бұрын

Do you have a page? I just got into this and i like to see all the different ideas.

I’m so glad you’re doing this video because this what I was thinking about.

Sweet can't wait to try this out!! Thanks Odin!!

I really enjoy your build videos. Thank you for sharing.

Cool build - thank you for sharing this.

This is frankly very relaxing to watch. 🙂

Thanks for the video It will help me fix my own lightsaber

the bass music is amazing, I love it :)

This is an awesome easy to follow video, I got hurt overseas, and cant do the wiring, but maybe i cna teach my kids with this. great work.

Super clean👍🏽👍🏽

Thank you your a bloody legend

Great tutorial!

very nice work

This seems like a pretty simple build ngl. I learned a lot of the wiring rewiring last year in tech class. Plus u have a Sauder. Might try this

Really cool!!!

Very talented man! Wish I had this knowledge! Great build 👌

Amazing work. Always wanted a proper tutorial on how to do this!

Just want to say thanks for this video I have put it to use to build and create my own.

Crazy how someone can know how to do all this. He grew up tinkering with stuff I bet. Pretty cool!

Bad ass build

Thank you, also a small note - the transistor part you heatshrinked gets very hot during operation, and you should attach it to saber body directly so it can dissipate heat.

I picked up the same Bladebuilders for 10 bucks at Canadian Tire today. What a coincidence! Thanks for the tutorial!

You kick ASS brother!

This is really helpful thank you! Ive been working on doing a combat ready Kylo Ren Saber using the tips youve given. the circuit board on the Kylo Ren verson is completley different to the Rey version as in the markings are different, switch and how to connect the LEDS. the high powered LED (Center LED) actually needs the Positive and Negotive connected otherwise the bulb wont be as powerful as the side LEDs. But again this has been really helpful!

Amazing

Thanks for sharing :-) Nice project :-)

Excellent tutorial. Thank you. I’ve built (3) of these so far. The only problem I’ve had is that the Micropuck I was using fried. It was rated for 500mah but only 3 volts so it couldn’t handle the (4) aaa batteries. I’m going to try a 500mah Micropuck rated for 5+ volts and hopefully that will work.

That is absolutely Brilliant i'm going to make one

Sooooo...in order to turn a toy lightsaber into a combat ready one...I just build a combat ready one. Thanks, super helpful, friend

Love it :) thank you for the video

You have inspired me and my friend to do the same thing thank you

This is really cool! You could buy a nice hilt from Saberforge in the closeout section for a little over a hundred bucks and with the minor upgrades you can have a really excellent saber for around 150.

thanks for making this video

hell i was even just looking into swapping the speaker switch and led in one of the toys, and then adding the blade... this will definitely speed things along

he makes twisting off the top portion look easy

Gotta admit, that is pretty cool! I'm already working on my kids' sabers!

@Simplystimulating

4 жыл бұрын

Justin Karr holy moly

Thanks I had a science project and I used your build to win😃😃😃

Damn what a mastery !

You are extremely talented and brilliant Sir :-)

I love watching things like this. It’s always fascinated me but I have no idea about any of it lol.

the shrink tube melting is so mesmerizing

Could you do a video for the combat lightsabers where it also includes a chassis's with a lightsabers crystal, obviously it's not critical but it would be a cool edition when stripping the lightsabers down to show it off to make it look even more the real deal plus it would be awesome to learn how to make a lightsabers crystal chamber

Be delicate with these boards, it's so easy to rip off the solder pads and leave your board useless.

I wish my soldering skills were enough to successfully do something like this..

@KitBashCustomSabers

6 жыл бұрын

The Beardless Man can you hold the tip of a pen against a flat surface for approximately 1-3 seconds? If you answered yes, congratulations, you have soldering skills sufficient to wire your own Saber.

@88Nikoli

5 жыл бұрын

Well this dude can't solder and he managed okay !

@numberyellow

5 жыл бұрын

The Presenter's soldering skills are abysmal...so you should be fine. And remember....twist the ends of the wire, BEFORE you tin them...jesus christ...

@Riffntings

4 жыл бұрын

@@KitBashCustomSabers kskdxjxjxjxjxkxksjxxjxjxjxjxjxjx

@brussell639

4 жыл бұрын

@@numberyellow I was thinking the same thing about his soldering work, lol. I know it did the job, but holy shit! I used to build circuit boards for Boeing and every solder connection he made caused me to cringe. But when you're using a $5 soldering iron from walmart... they're not so great.

That's amazing

My dad just told me where babies come from! Led Supply

Love your stuff Very Smart

So doing this. But a parts list would help.

@OdinMakes

6 жыл бұрын

Beyond Geek will post one later, but it is almost completely the same list as the other DIY saber build here on Beyond Geek. The only new parts are the toy, and that PNP transistor (NTE 242 is the model I used here) but I have grabbed other models now, and all have worked. Just make sure it's PNP- Positive-Negative-Positive. NTE also sells NPN, and they might work, but I have not tested them.

@BeyondGeek

6 жыл бұрын

The parts list is now up. Thanks!

Now I'm going to put some shrink tube over my head, just in case it short circuits.

I don't know if I can find all the materials here in my country, but in a month time I'm gonna try to do this! Hope it works

2:54 Odin: For when I decide to go Sith Me: ODIN NOOOOOOOO

Awesome build!I think you should do an episode on how you keep your work area from being cluttered. Seriously, how do you keep stuff organized?

@BeyondGeek

6 жыл бұрын

Haha! It's how @Odin Makes genius mind operates. That and he has the uncanny ability to have anything you need laying around!

@thedocdodge

6 жыл бұрын

Clean. Build. Table... What kind of madness is this!? lol

Nice!

Gotta love those shrink tubes.

Thanks

I don’t think I could solder that good but I agree with him on one thing. I wish I had that when I was a kid lmfao 😂😂😂. It would have blown my mind as a kid.

Nice Change

I have a saber forge saber that looks really nice but I didn't include the sound because it was just too expensive. I might try modding it with this, it sounds good enough to me! Definitely better than nothing

I actually did that, I had an Obiwan Episode 3 one, and my friend who actually duals fir disney on occasion broke her battle ready lightsaber (modified), and needed one for a event in NJ, so I pulled my old one apart, then shoved her insides in, then replaced the blade with a pre-ordered plastic one (can't remember what its called, but its what is in safety glasses), took about 10 hours, and no sauntering except for the led.

how tf did you just “unscrew” that cap

@Firstnamelastnameismyname23

4 жыл бұрын

*P U R E M U S C L E*

@AdrianChazz

4 жыл бұрын

@@Firstnamelastnameismyname23 To be fair THAT's how Odin Makes...

@RollerCoasteraddict

4 жыл бұрын

I was thinking the same thing ... i am over here with the same saber giving it my all ... even tried pliers ... but this guy just unscrews it like its nothing ...WTF!

@ramailamjad1995

4 жыл бұрын

I tried taking the laser part of but it won't budge, the laser part just bends, doesnt even break, as for the top cap? Pretty sure this guy used the force to open it 'cause I thought it was one piece, doesnt even move a bit.

Nice

a true Master Jedi

I just bought this saber :D

Cool video, and thank you for the content, but I think the point was missed here. I think what people REALLY wanted to know was "Can you turn the hilt and electronics from a toy saber into a combat-ready saber (ie: what does it take to put a stronger polycarbonate blade, and brighter LED into the toy saber)?"

Super NEATO!

Electronics Geek + Star Wars Geek = Cool Geek.

How to make a combat ready lightsaber 1. Get tape 2. Color the roll of tape with marker 3. Roll the tape into a tube 4. Get a light 5. Make sounds with mouth I’ve had this homemade saber for a long time. Very durable. Great for fighting Maul. Would recommend. 10/10

This was cool I wanna try with Kylo RENs sound board

i liked it i wnt to buy ittttt so cool

How to turn a toy look lightsaber into a combat ready one step 1: buy a combat ready lightsaber step 2:admire your purchase 😂😂😂

First!

@jaimeenrique1

6 жыл бұрын

There are many ways to do a top comment, but this is... ...this is deja vu!

@xLEO_C137x

6 жыл бұрын

Odin Makes last!

@thebluespade1866

6 жыл бұрын

What do you need Jaime

@MagicMarkTakePart

6 жыл бұрын

Odin Makes a

@MagicMarkTakePart

6 жыл бұрын

The Bone Zone q

Cool

Great video really enjoyed it 😀 just wondering if you do a tutorial how to build a sonic screwdriver from the sci-fi show doctor who with the last got and sound effects or a custom sonic screwdriver version or ( build/personalise) your own sonic screwdriver set with all eras of the show if you were cosplaying the doctor of the doctor who show to comic con conventions 😀

The reason why the end cap was difficult to remove is that the blade builder port is nailed in to secure it into the toys

Cool, but for $75 you can get a professionally CNC machined lightsaber from Ultrasabers in their mystery box. Granted it may not come with sound, but plenty of people have gotten lucky and received sound ready sabers for the same price.

@TNJ812

4 жыл бұрын

Joshua Waddell yeah but your Kober crystal color will probably not be accurate

@theinterstellarpodcast7252

4 жыл бұрын

Yeah sure and when you live anywhere else then america you have to pay 60 bucks shipping

@jenniferbeyer6412

4 жыл бұрын

Can you post the link to ULTRASABERS? Thank you in advance.

you made my dream came true

Yeah I wanted to see you actually convert the toy itself into the combat ready saber. That way I could get the graflex look just by buying the bladebuilders toy and converting it to have better sound and a better led with a combat ready blade.

By the way thank you, I love it,