How to Tune a Paramotor Carburetor - 2022 in 4K
Moster 185 Carb Tuning in 2022
Learn To Fly With Us:
www.AviatorPPG.com
Support Us On Patreon:
/ aviatorfamily
Follow Us On Instagram:
/ aviatorparamotor
Follow Us On Facebook:
/ aviatorppg
Store:
Shop.AviatorPPG.com/
Gear We Use For Videos:
Main Cameras: Panasonic GH5
amzn.to/3ondkiv
Helmet Cameras: Go Pro Hero 9 Black
amzn.to/3koW89D
360 Camera: Insta360 ONE R
amzn.to/2HuL6Bq
On Camera Audio:
amzn.to/3kpYnK7
Lav Microphones:
amzn.to/2TjP967
Primary Drone: DJI Inspire 2 with X5S Camera
amzn.to/3ok0aT8
amzn.to/3mgkJ1c
Secondary Drone: DJI Mavic Air 2
amzn.to/31ym1g8
Backup Drone: DJI Mavic Pro 2
amzn.to/3oi89jH
Thanks for watching!
Пікірлер: 41
I'll be using this before my first flight this season, thank you!
Thanks Neil and Aviator. Great information.
Thanks Aviator! Very helpful
If you have to turn the High screw always go CCW first never CW.Then turn in 5 min increments until the motor slobbers and smokes under full power..then you want to turn it CW in 1 minute increments until the slobber just goes away then 1min further.Thats only if you must other wise have a skilled tech do it :)
Great video! Thanks
Excellent Information! Thank You.
Thanks Neil. Good stuff. - Ben
Nice, thanks Neal
Thank you Neil! Thank you Aviators! WE NEED MORE.
@aviator
2 жыл бұрын
Let us know what topics you'd personally like to see next!
Nice Neil!
I really dig good teaching
Nice info!
Neal is such an expert!
Cool video
An extremely helpful video! I am still new to this and I'm wondering, is the 'H'igh screw for adjusting the idle Thanks!
I do not understand how it leans out bending over being a diagram carb. But...... this was my issue and it fixed it!!! I am super grateful, never too late to learn new things 😀
So if you were to re-build your carb, what would you set your high screw too to start?
This is the good shit, thank you. More detailed gear vids like this!
@aviator
2 жыл бұрын
Let us know what topics you'd personally like to see next!
@error.418
2 жыл бұрын
@@aviator Have you done tuning steering line / brake length? Setting up tip steering? Setting up / tuning speed bar? Scheduled engine maintenance (what to do, when to do it)? Attaching and adjusting a new harness? Thoughts about harness adjustments? Hang point setting and testing? Reserve placement, style, maintenance? Pre-flighting? Post-flighting?
@aviator
2 жыл бұрын
@@error.418 We've done the first ones you mentioned, the rest are great! Thank you!
@error.418
2 жыл бұрын
@@aviator Thanks for all the awesome work!
Wich is a good starting point of the idle screw before you start to tune the carb?
*Neil
How do I tune for fuel efficiency? My carb is using tons of fuel!
Have an old top80 starts and ticks over perfectly, but runs like a dog and dies when warm. Any tips? Tia
Neil!
Hi. Could you offer me some advice please. My brand new maverick with a moster 185 MY22 engine feels weird. Iv flown it only 1ce. I’m using good fuel with 2% motul 800 mix as it’s still in the running in phase. Iv followed the Manuel and spent the usual 2hrs or so running it in on the ground. When I went to take my very first flight it felt weird. Not like when using the flying schools own moster 185. It felt under powered. My first take off failed cos it felt weird and the send attempt was successful but felt like I almost crashed after take off. I flew fine once in the air But on take off my instructor was saying FULL POWER. I always do full powers. But it felt like it didn’t go to full power. Anyone else had this issue.
@aviator
Жыл бұрын
Plenty of issues could be at play, and we would be glad to help. What is the elevation of your local field?
I have not touched the high needle. Running 50:1 non ethanol with amsoil Sabre. Motor has 5hrs. Has never really run right. Mid range 4800 to 5500 was always rough. I tuned it by bringing the low needle 1min in at a time. I WAS able to get the motor to idle, transition, cruise, and full power perfectly. The problem is, I am afraid the plug shows it's too lean. After 45 mins flight the plug still looked new. No coffee color at all. If I richen the low screw to the point it browns the plugs porcelain, it runs rough and like crap. How much do you value the color of the plug? Do you think I need to adjust the high needle and possibly ruin my warranty?
@aviator
Жыл бұрын
Hey Warren, if you would drop us an email, repair@aviatorppg.com we'll do all we can to help!
@nickholmes6376
26 күн бұрын
Hello, I have exactly the same issue with my engine, if I tune it as this guide to get it to run good then the plug colour shows its lean if I back out the low needle just 1 minute of a clock face then it runs rough and lumpy on cruise power but the plug looks nice with a coffee colour,.did you get yours sorted
@warrenkral6562
26 күн бұрын
@nickholmes6376 I did get it sorted about 2 months after this post. I stopped worring about the plug color as I found it takes a while to show it's true color. My secret sauce is... I lean the low needle to the point it bogs on quick acceleration, then back rich one min. I then check the cylinder head temp with a laser temp gun. I shoot to keep the average temp around 325 F to 350 F. I find one min rich or lean can change the CHT 25 to 35 degrees Fahrenheit. I run 66:1 saber, with non ethanol 89 and BR9es plugs. My motors (I have two moster 185s) both run perfect now. Also, don't use motul 800. Wayyy to much carbon build up for average type flying. Where I am in NC, I need to seasonally change the low needle one min plus or minus for hot or cold.
Neil, what paramotor frame are you using?
@aviator
2 жыл бұрын
It’s top secret ;)
@tamir8224
2 жыл бұрын
@@aviator , very interesting :)
@aviator
2 жыл бұрын
@@tamir8224 more information soon :)
@fasst45072
2 жыл бұрын
What frame? I don’t see no frame
@aviator
2 жыл бұрын
@@fasst45072 there’s a frame?!
When on a carburetor tuning video, one says "The H needle- you don't want to mess with" is the moment I close the video. You tune H first, then L, then Idle. Braaap. Safe flights. L affects H, too lean L will lean out H.