Your snow blower should start within three pulls of the starter rope. Follow step-by-step instruction to determine why your snow blower won't start: checking fuel levels, spark plug, carburetor and compression. Follow along this DIY video to troubleshoot and learn when it's best to service your snow blower.
Introduction: 0:00 - 0:10
Starting configurations: 0:10 - 0:51
Attempt to start snow blower: 0:51 - 1:03
Step 1: Check for gas in tank: 1:03 - 1: 15
Step 2: Check spark plug: 1:15 - 2:45
Clogged carburetor: 2:45 - 3:30
Fresh treated fuel: 3:30 - 4:10
Step 3: Check ignition system: 4:10 - 4:58
Step 4: Replace spark plug: 4:58 - 5:47
Attempt Start: 5:47 - 6:14
Conclusion: 6:14 - 6:41
First step, check the fuel tank to make sure there is enough fuel to operate your snow blower. You should see fuel slosh around. Second step, check the spark plug. A wet plug means there’s fuel going through the fuel system and there may be an issue with the ignition. A dry plug means there may be an issue with the fuel system. A common issue is a clogged carburetor from stale gas. Using a fuel stabilizer keeps fuel fresh and the carburetor from gumming and varnishing. Third step, check the ignition system with a spark tester. Step four, replace the spark plug and reconnect the spark plug wire. If your snow blower still doesn’t start you should consider taking it in for service. Briggs & Stratton has over 12,000 servicing dealers in our network. Visit our website to locate the nearest dealer to you.
Head to our website for more maintenance tips or find us on social media:
Briggs & Stratton: www.briggsandstratton.com/
Facebook: / briggsandstratton
Twitter: / briggsstratton
Instagram: / briggsstratton
LinkedIn: / briggs-&-stratton
SUBSCRIBE to Briggs & Stratton KZread Channel: bit.ly/2spW6qd