How to "Traditionally" Dress Your Vevor Anvil
Тәжірибелік нұсқаулар және стиль
I show you how to traditionally dress your Vevor anvil (or any other anvil for that fact!)
You can check out this anvil at:
66lb Vevor anvil on Amazon amzn.to/3w42R3x (amazon Affiliate link)
66lb vevor anvil on Vevor.com and use VVPRO to save 5% off s.vevor.com/bfQRVH (affiliate link)
66lb Vevor Anvil Videos:
The Vevor Anvil Review: • Reviewing the 66lb Vev...
How to Traditionally Dress Your Vevor Anvil: • How to "Traditionally"... (this video)
Vevor 66lb Anvil: Will it Survive? • Vevor 66lb. Anvil: Wil...
Vevor Anvil: Deep Dive on What Happened: • Deep Dive: What Happen...
Join this channel to get access to perks:
/ @christcenteredironworks
--------------------------------------------------------------
Want more Christ Centered Ironworks?
--------------------------------------------------------------
Want to SUPPORT what we do here at Christ Centered Ironworks Blacksmith Channel?
Visit my channel: / christcenteredironworks
Stop by my website: www.blacksmithpdfs.com
Get some merch: teespring.com/stores/christ-c...
Shop my Amazon Influencer page for shop tools: www.amazon.com/shop/christcen...
Social: / christcenteredironworks
Пікірлер: 26
As a beginner, 💯agree start dressing with some variety but don’t round off too much at first; if you find yourself always on the bigger radius sections and wanting even more softness, go back and dress a bit again, and keep forging and dressing until you find what you want. That’s also a reason I’m glad I started with one of these small and inexpensive but decent steel anvils (mine’s the HF Doyle double horn) because I can grind and adjust and fiddle with it and learn so I actually know what I want when I eventually upgrade.
@stephenpadilla4086
5 ай бұрын
I have the same anvil. I have not dressed it yet. Thank you for your comment here in addition to Roy's outstanding video.
I'm glad to see new videos for Sunday morning coffee.
@ChristCenteredIronworks
5 ай бұрын
More to come!
Thank you so much, Brother Roy! I really like the philosophy of leaving it relatively sharp and then adjusting in the future as needed. It's like what my mom always said about putting salt & pepper on our food: "You can always add more later, but you can't take it away."
Thanks Roy! Good morning!
@ChristCenteredIronworks
5 ай бұрын
Good morning 🌄
Thank you for all of your posts you have done over the years. You are a very good source for information on smithing. I live about 10 miles or so from a location where John Deere had one of his forges. My son and I caught the bug for blacksmithing on a visit to the historical site that is there when we visited it about 12 years ago. What started out as a hobby back then has turned into a full-blown obsession for both of us.
@ChristCenteredIronworks
5 ай бұрын
You are very welcome
Great and useful info! I recently had an old anvil refaced and will need to dress the edges, this video is a big help.
@ChristCenteredIronworks
5 ай бұрын
Glad it was helpful!
Thank you for the detailed information. Blessings abundant y'all Crawford out 🙏🏻🔥⚒️🧙🏻♂️
@ChristCenteredIronworks
5 ай бұрын
Same to you!
thanks Roy, very usefull
@ChristCenteredIronworks
5 ай бұрын
Very welcome
It took me a few years of working on it to finally know how I wanted to dress my Peter Wright, and to work up the courage to grind parts of it. Unfortunately, a previous owner or owners removed all the 90 degree spots, so I have to use a different anvil if I want a sharp shoulder. Great info, thanks, Roy!
Great video
@ChristCenteredIronworks
5 ай бұрын
Glad you enjoyed it
This is a fantastic video. Maybe I missed it, but have you already covered this topic for South German/European anvils?
I started with a 55 pound vevor anvil. Its a bit soft but still in my shop doing its thing. I have railroad track i use most of the time now. Just built my own forging press.
@johnblanton-fd3jf
5 ай бұрын
I started with RR rail and still use it for shaping projects on the radius edge , my main anvil is a Peter Wright 112# . Hammer On !
@ChristCenteredIronworks
5 ай бұрын
Glad to hear your gearing up 💪 thanks for watching
Got a 1870ish anvil from a naval shipyard. Price was right and it is functional, but edges are chipped and gouged. Pritchell hole broken off. Been using it for about a year but want to dress the edges. Suggestions?
Getting to wide for your stool Roy. Jess, time to put him on a diet😛😂
@ChristCenteredIronworks
5 ай бұрын
Lol I am on a diet 😂
@billwoehl3051
5 ай бұрын
@@ChristCenteredIronworks it's that winter insulation