Thank you Peter . We have a Toyota 2004 Matrix XR like the one in your shop . You are a great teacher !

I took apart a frozen IAC valve from a 2000 Echo that had been sitting for 17 years and gave up on trying to free-up the valve when I broke the magnet. I took a chance on a new less than $20 aftermarket IAC valve that took a week for Amazon to deliver but it works great. It claimed compatibility with 2000-2005 Echo, 2004-2006 Scion xA & xB. I almost went to a salvage yard but the new gasket included with the new idle air control valve convinced me to give it a try. Now it idles correctly again. I got lucky.

@dirtydancingdk

15 күн бұрын

You are clever and smart, greeting from the drive was mech.

Thank you so much Peter for taking your time to educate us do we can save money have a good day my friend

I disassembled and cleaned mine. Very easy and good as new.

@rkgsd

2 жыл бұрын

Yeah curious that there was no attempt by him to clean the old one first. Granted it doesn't hurt to just replace it.

@aramelize

3 ай бұрын

What did you do to clean it?

Peter, you are so kind and welcome!

The DIY'ers appreciate your videos!

yeah usually when i clean the throttle body i attach the little hose piece to the throttle body cleaner and stick it down in the hole. I have done this for years after replacing the part. you can also take it apart by removing those two bolts and make sure its spinning around and not getting stuck by dirt etc. :P

Very good ! Thanks. Trinidad & Tobago. West Indies.

Thanks Peter , for this video, great information.

Thank you 04 Tacoma with 2rz has given me the same problem!!

Great and very very helpful thank you for your help and knowledge 👍😀

Great video. Peter is on the heels of RtR crowd.

Great video, Peter! And those birds are getting stronger. 🐣 🔊👂 ❤❤❤

Thank you for this video, i learned a lot on how to test idle air valve.

Thanks a lot this is the best and very helpful video

thanks for giving me this opportunity!

Thanks for sharing this video, very interesting information.

Another great video! It's so funny that you go from a shop with a noisy windy garage door to a noisy bird family😂😂😂

Thank for teaching fantastic teacher

Love the vids. Maybe put the code in the title of the vid so anyone searching for help with that code will find your vid easier.

Great my man, thank you

Tyvm its very helpful

Thank you buddy!!!

Thank you so much! 🤘🏻🤘🏻🤘🏻

Thankyou for showing

Thank you very much .

Merry Christmas to you! Question, were you able to repair the connector on that idle air control valve you mentioned in your video?

Thank You!

Thank you so much for your video. Appreciate it if you could share with me how much is the electrical resistance between the three pins of the IAC actuator. Is it around 20 Ohm?

Great...Thanks!

Chuurrr good advice thank you

Thanks a lot sir

What's the voltage range of the signal to the IAC? I need to get a service manual one of these days.

Great video. Same as my problem. The three screws on mine are are near impossible to get out. I put every thing back started car, high idle still of course. Gave a tap while idling and instantly revs dropped to normal. Not a proper fix of course. At least I know what the issue is.

@Penland1234

13 күн бұрын

What was it?

Peter you forgot to give us the after repair video of the engine running with the idle fixed. Thanks

Hi Peter. I have a 2003 Tacoma (same as the cream puff you had the video on). I’m at 260k miles and my ac will be working than goes hot. I can usually get it back to cold with a quick turn of the dial. Any idea if it’s just a bad dial or something else?

@realmenservegod8229

7 ай бұрын

Change the cabin filter? Or wiring maybe

It looks like the black plastic electrical section comes off the valve body Are you able to disassemble the old unit and try and to free up the sticking valve Cheers

@Feckoff730

7 ай бұрын

I am also curious about this as well, can it be removed and cleaned?

Hello, does the 1GR-FE use an IAC? Thank you

Hi Peter I have a 2004 matrix and I had an issue with high idle I have and the pedal sticking when steping on the pedal, I have chage the IAC valve 2 times and even have change the hole thorttel body, and Im still having high RMS.. your thought's?

i had same problem but with a 2004 pontiac vibe gt, replace the iac , i try to open the old one but it has a 5 point start bolt, i only have 6 point star bit

Sure wish Peter would have shown us the inside of that unit.

@erinkusch7322

7 ай бұрын

he did- it is quick but you can clearly see at 05:40

@erinkusch7322

7 ай бұрын

05:38 to 05:40

Can it also be a symptom of a very very low idle? car struggles when cold especially for starting and sometimes will die. performance improves when car warms up.

Does 2004 Toyota Rav4 2.4L Gasoline with electronic throttle have IAC valve ?

I am a viewer of your channel. Is it possible to change the 1.4 to 1.6 engine in a Toyota Corolla 1.4 4zze 120l

The idle on my Corolla was all over the place so disconnected the IAC and now won't drop below 1100rpm. I've removed the throttle body, cleaned the IAC as the shaft wasn't moving freely but does now. Hopefully that will solve it.

@TomMac1

9 ай бұрын

Did it work?

@jaggass

9 ай бұрын

Yes

@TomMac1

9 ай бұрын

All good, got mine working last night, happy days

@jaggass

9 ай бұрын

I scraped out alot of carbon with a screw driver and used brake cleaner. I knew it wasn't working because i couldn't hear the magnet spinning and kept cutting out.

👍👍👍

Those "philipshead" screws actually need a special tool. I think it's called a JIS driver?

👍👍

I wish I had this video a few years ago when my 2003 rc300 my iacv died and really annoyed me, especially after the cheap Chinese knockoff wasn’t even built right!!

Does Toyota Auris have one ?

My 13 Corolla idles 400-500 shakes at stop signs. It does correct it self but almost shuts off. Cleaned the throttle body and no codes can this be a culprit ?

@coloradoboo1071

2 жыл бұрын

Ensure air filter looks good and add a bottle of Lucas fuel injector cleaner in the gas tank. If plugs are old, maybe check and replace.

@marshmower

Жыл бұрын

Check your throttle stop adjustment. That controls the lowest idle drop. It doesn't control "idle up" but can solve minor issues with alternator.

I have p0300 random mis fire rough idle on my 03 corolla 230,xxx miles should I replace the IAC cause I didn't get a code from the IAC. Replace brand new NGK Iridium spark plug, used 4 ignition coil, clean out all 4 fuel injector, replace intake manifold Gasket, throttle body gasket and ICA gasket. Couldn't find no vacuum leak and no fuel leak

@mrsolanipekun7668

3 ай бұрын

When does the misfire occur? When engine's cold, or when hot? ... Pekamo

I have a P0511. I changed the idle speed sensor and it still is showing P0511. What can I change next?

There are two coolant lines connecting to bottom of the throttle body. Is that for cooling the intake air or warming air ? Can we by pass these lis

@inverseuniverse5727

Жыл бұрын

As air passes through a low pressure air cools ..therefore jot coolant warms throttle body.

@marshmower

Жыл бұрын

To reduce condensed goop I think. If it was colder, there might be more frequent cleaning required

I went to the dealer to price around for an Idle Air Control Valve. Part number 22270-22050 for a 3ZZ-FE engined Toyota Corolla 2000. They go for 735 euro after tax here in the Netherlands. What a rip-off. I just ordered the IACV gasket, the 4 JIS screws and the throttle body gasket. Gonna have to look for an used one, unfortunately. The entire throttle body assembly (with the IACV and Throttle Position Sensor) go for around 100 euro used. So I think I will try that.

Have 2002 vehicle that again has been sitting for two years… And now idols at 1800 rpm….

does the roller inside close all the way

Scotty has one of these.

Anybody know the part number of the IAC for a 2009 Rav4, 2AR-FE 2.5 liter engine. When I asked for this at the local dealership they just look at me like I'm stupid. Any help is appreciated .

@TomMac1

9 ай бұрын

Did you change the IAC and did it work if so?

@alandust2188

9 ай бұрын

@@TomMac1 no, another dealership told me that my engine doesn’t have one. I sold the Rav4 when we downsized to one vehicle.

I’ve never seen Toyota part number with a Letter in it.

It will not work. The valve was clean. One or both windings must have been cut. It happens when the moving parts of the valve stick.😉

But only buy OEM.

matrix XR hatchback compact station wagon made in cambridge regular unleaded 13.2 gal 28 city 36 highway 1.8L 16 valve dohc manual non abs 2778 curb wt 61H x 171L x 70W $14,599 msrp. 2022 market 3800-6300, 662,000 models 2003-2004 only Corolla, Matrix, Vibe, front driver & pass power windows known to be loose and rattle at regulator.

👍👍👍