How to test & jump start PC power supply (EVGA 1000 Paper clip test)
Ғылым және технология
How to test & jump start my PC PSU power supply on its own without any motherboard or load
EVGA 1000 GQ Power Supply
amzn.to/2SyYCV8
Follow my instagram! @JumperManTech
Пікірлер: 25
Thanks brother! Good Video!
thank you my brother i just fix my evga 1300 g2 the same way
Good stuff subbed
@JumpermanTech
5 жыл бұрын
brandon coin Woaaaah! I've been watching your videos for a while now and just created my channel recently. Hyped to have you as a subscriber! 😂😎✌️
You would know why 2 evga 750 GQ sources do not turn on with the add2psu Synchronizer cable adapter. thanks
My whole pc won’t turn on can you help me I’ve tried to jump start the clan but it wouldn’t work
Can you leave the jumper in for long periods while mining ?
Thanks
@JumpermanTech
4 жыл бұрын
You're more than welcome! Thank you for your feedback. Happy holidays!
"Mines didn't come with that" Damn.
I was wondering what this thing no pins and wire was.
Fan starts after paper clip test but not when plugged into the motherboard. What do you recommend to do next?
@JumpermanTech
3 жыл бұрын
Jumpstart the motherboard by jumping the on/off button manually. I made a video on it. The video is more in depth for your understanding but basically follow the on/off button wires to the motherboard and go across them with a conductor like a piece of wire or even that paperclip. kzread.info/dash/bejne/nmmEsZazf9S4Z7A.html Thats the link to that video. If it's not the switch, last thing I'd say is look into the battery on your motherboard. My motherboard battery literally just died and I had the same issue as you. Let me know if anything helped!
@ninjaphunk
3 жыл бұрын
@@JumpermanTech thank you, I was able to jumpstart my mother board and the machine runs without the paper clip now. However my monitors aren't detecting any signal now
you legend...I was shitting myself cos my one only spun for half a second until i realised my eco was turned on
I’m getting no signal on MB
I did the test, my psu starts but few seconds after fan of the psu stops! What do you think it might be?
@tamilashultz9676
3 жыл бұрын
A high power psu like this will not run the fan unless you're using at least 700 watts. If you're just idling then the fan will be off.
is it safe to just leave the paper clip ?
@JoshYates
10 ай бұрын
I've used paper clip before and it worked just fine.
Can't you just simply buy a cheap power supply tester to trick your PSU into on state?
Your brain is going to melt
My power supply is working with paper clip wire why is not working without paper clip wire ?
@insomniacx2093
4 жыл бұрын
Same