How to Swap Wheels and Lowering a Hot Wheels - Ford F-150 SVT Lightning 1/64 scale
Тәжірибелік нұсқаулар және стиль
This video contains a tutorial on how to swap wheels and stance a Hot Wheels. Using Hot Wheels '99 Ford F-150 SVT Lightning.
There are so many subscribers who ask for more detailed tutorial videos to be made. One of the most frequently asked questions is how to lower the hot wheels. this time I made a more detailed video, so it can be easier to understand.
Chapter:
00:22 Opening Hot Wheels Rivet
01:09 Opening Wheels
01:27 Installing New Wheels
07:06 Reinstall Hot Wheels Body
Thank you for spending your time watching this video.
Tools & Equipment:
3M Sanding Sponge: amzn.to/48oO29A
Epo Putty: amzn.to/481pwff
PLA Plate 0.3mm: amzn.to/3GMnQKz
PLA Plate 0.5mm: amzn.to/3NxPlv5
PLA Plate 1mm: amzn.to/3tmKfuQ
Stainless Tube: amzn.to/3GQ2pIu
Paint Remover: amzn.to/3RLfBoj
Surfacer: amzn.to/3TsYrNq
Clear Gloss: amzn.to/3GPkZR1
Thinner: amzn.to/41uTTIz
Brush Set: amzn.to/4aoeGS2
SOCIAL MEDIA:
Instagram : / tollegarage
CONTACT:
Email (Business Inquires Only): GarasiTolle@gmail.com
#fordf150 #fordlightning #hotwheels
Пікірлер: 133
This is the type of quality guide KZread was meant for. Straight to the point and no fillers. Well done!
@TolleGarage
2 жыл бұрын
Thank you my friend 🙏😊 I will make more tutorial like this in the future.
We need more how to videos for the young ones to learn. By far one of easiest videos for my son to follow. Awesome work buddy thanks!
@TolleGarage
2 жыл бұрын
Thank you my friend, I will make more video like this in the future 😊
@crator8621
9 ай бұрын
Yeah I agree this has been a big help for me starting out, Just ordered a bunch of new wheels to try this with 😁
Thank you! As a beginner, this really helps! I want to make something for my dad, so this helps.
@TolleGarage
Жыл бұрын
You are welcome. Good luck for your project, your dad should be proud of you.
Love the lowered stance on the Ford SVT lightning, good to go on the road in more ways than one, great job.
@TolleGarage
4 ай бұрын
Glad you liked it! Thank you
Man. When I was younger I used to drill them apart, clip off all the tabs holding the axles in place and swap the wheels and PRAY they stayed in place and snap the body back on and again PRAY it stayed in place. Just for wheel swaps. This was a great, simple tutorial. Great video.
@TolleGarage
2 жыл бұрын
Thank you my friend 🙏😊
Great video I got some of my childhood diecast that I’m thinking about lowering and customizing
Thank you for this video, it was helpful 👍🏽
@TolleGarage
8 ай бұрын
Glad it was helpful!
Wow! A Lightning, slammed on Volk TE37's looks sickkkkkk!!!! 🖤
@TolleGarage
2 жыл бұрын
Thank you my friend 🙏😊
Thanks for showing us. Always good to see how others do things
@TolleGarage
2 жыл бұрын
You are very welcome 😊
nice video
@TolleGarage
2 жыл бұрын
Thank you
Nice
@TolleGarage
Жыл бұрын
Thanks
I own a black 2004 that is lowered ... need one with the scuff marks in the front bumper cover ... thanks
Awesome work by the GOAT!!! You're amazing Brother Theo!!
@TolleGarage
2 жыл бұрын
Thank you brother Brad 😊😊😊
Amazing work
@TolleGarage
2 жыл бұрын
Thank you my friend 🙏😊
Bro teaches me everything 🔥
@TolleGarage
2 жыл бұрын
Sure 😊 this is the first lesson
Thank you for the educational tutorial.
@TolleGarage
2 жыл бұрын
You are welcome 😊
Very nice work bro,awesome result
@TolleGarage
2 жыл бұрын
Thank you my friend 🙏😊
The Fast And The Furious Reference 🖤
I’m thinking to do this when I get a new house but I’ll keep this in my liked videos so I remember
@TolleGarage
2 жыл бұрын
Thank you
Excellent video, could not find the site where to by those wheels and tires, TY
@TolleGarage
16 күн бұрын
Thank you my friend 😊 Oh, maybe the store was closed. This is the old video. You can contact Instagram @hpz_diecast for buy the wheels
Thanks for tutorial is great custom work Iblearn many trick from you 😊👍
@TolleGarage
2 жыл бұрын
You are very welcome my friend 😊
Very nice video like all you other wonderful videos!! I have a question do you made a thread for the screw? If yes what do you used?
@TolleGarage
Жыл бұрын
Thank you so much my friend 🙏🙏😊 I just drill it with 1.8mm drill bit, and I use 2mm bolt.
@Mario_Andretti.
Жыл бұрын
@@TolleGarage thanks a lot for the response my friend...
Turned out sweet man.
@TolleGarage
2 жыл бұрын
Thank you my friend 🙏😊
sanding the bottom of the car also works
I got burnout of build a gundam kits. I think I will try to customize a hotwheel next bcause I have so many hotwheel in my toys box.. 😂 look fun!
@TolleGarage
Жыл бұрын
Haha...yes, agree. We need more than one hobby.
@Sedvn
4 ай бұрын
Thats all i mess with is gundams and starting hot wheels. Do much with the hot wheels in the past 7 months?
Show 👏👏👏
Perbanyak yg seperti ini bro theo, sebagai selingan untuk viewer.. Great work bro theo🔥🔥🔥
@TolleGarage
2 жыл бұрын
Siap bro...kalau ada ide apa yg harus dibuat, feel free to share ya. Mungkin yg next ttg cara saya ngecat pakai pilox ya.
@aryaratmaguna27723
2 жыл бұрын
@@TolleGarage nah menarik itu bro, sama mungkin preparation sebelum pengecatan, pasti banyak yg penasaran.
@TolleGarage
2 жыл бұрын
Nah iya betul, mulai dari persiapin body ya. Sip sip...nanti dibuat
@sigitkuncorosigit7607
Ай бұрын
@@TolleGarage Senang bisa berbagi tipsnya om, sukses selalu.
Awesome video! Do you have links to the tools and bolts you use?
@TolleGarage
2 жыл бұрын
Thank you my friend 🙏😊 Oh, I live in Jakarta, Indonesia...I think will be very expensive for sending it overseas.
good job👍
@TolleGarage
2 жыл бұрын
Thank you my friend 🙏😊
Can you do another one but with bigger tires like one that you would have to make space for
@TolleGarage
Жыл бұрын
Good idea, will think about that
very good 👍
@TolleGarage
2 жыл бұрын
Thank you my friend 🙏😊
Salam sehat dan Sukses selalu Mas...mau tanya,bautnya buat gantiin rivet yg rusak,beli d mana?Terima kasih.
@TolleGarage
Жыл бұрын
Halo bro, bautnya di toped banyak kok. Baut 2mm yg panjangnya 4-5mm.
I have a uestion i wanted to buy some wheels off of your website but it didnt tell me how much wheels it comes with so i was wondering if you could tell me how much it comes with?
@TolleGarage
Жыл бұрын
The price? Around $7
Awesome video, where can I get the 1.2 stainless tubes for the axles, TY
@jcsgaragejohnc.5027
Жыл бұрын
Also where can I get wheels and tires, like the ones you used In this video, TY
@TolleGarage
Жыл бұрын
Thank you, you can check it in the description...you can ask him to send it overseas
Hi there i just started getting into making custom hot wheels and i bought all the tools i need and some wheels to do the swap but i’m not sure where to get those axles. Where will i find them?
@TolleGarage
Жыл бұрын
Oh...I don't know where you can find it in your country, but you can contact @sakuramodel via instagram to buy it...also with the wheels. But we send it from Jakarta Indonesia. Or you can use cotton bud stick and original axle as the stoppers. But you need to adjust the base for install the cotton bud stick.
@thebassmusic5010
Жыл бұрын
@@TolleGarage hi there thank you for the help. I found some online for good price however they come in different sizes what size am i going for? They have different sizes for the outer and inner dimentions.
Bro I have a question what if you tires are rubbing against something or don’t wanna spin
@TolleGarage
Жыл бұрын
We must make the fender hole bigger
Want to know were you buy the screws i can't find
@TolleGarage
2 жыл бұрын
I bought it at local hardware store like ACE hardware
I try doing a lower 69 charger but failed thanks mate for helping me thanks mate
@TolleGarage
3 ай бұрын
Glad it can help. Have fun my friend 😊
👍🏻👍🏻👍🏻👍🏻👍🏻🙋♂️🇰🇿
What tool did you use to cut the axles, and bend the axles?
@TolleGarage
Жыл бұрын
Nipper or you can use mini grinder
How to ride hotwheels with family and change name of car to personal🤔
Ya
Where did you buy the tube for the axles
@TolleGarage
3 ай бұрын
I bought it from local marketplace (indonesia). But I maybe you can find it on amazon
@joeldewoo5297
3 ай бұрын
@@TolleGarage thank you
This is something i need to know because i have about 40 of these red lightnings. lol
yow bro where can I buy that tubes? thanks i love your videos!
@TolleGarage
Жыл бұрын
Thank you so much. Oh, I bought it from a local seller in Indonesia. I put the link in description. If you can't find it, you can also use cotton bud
What are the Sizes for Axles ( tubing ) ?
@TolleGarage
Жыл бұрын
1.2mm
Where can i find the axles?
@TolleGarage
7 ай бұрын
I bought it on tokopedia.com...local marketplace. Maybe you can find it on ebay
Do you have to thread the inside for the screws?
@TolleGarage
2 жыл бұрын
Yes, the first drill bit 1.8mm is for making hole for 2mm bolt
@kylecoleson1621
2 жыл бұрын
@@TolleGarage just the drill bit is enough to screw into or you have to tap it?
@TolleGarage
2 жыл бұрын
Just drilling it...with 1.8mm drill bit
@kylecoleson1621
2 жыл бұрын
@@TolleGarage that's awesome what's the length of the screws you use? 2x8mm?
where do you buy the tires?
@TolleGarage
28 күн бұрын
Instagram @hpz_diecast
😁 I love it Probably gonna learn about that
@TolleGarage
2 жыл бұрын
Good luck my friend 😊
Can teach me how to fix bent hot wheels car axles?
@TolleGarage
Жыл бұрын
Buy a new wheels
@dondon6174
Жыл бұрын
Thank you very much.
where you got those.wheel from
@TolleGarage
2 жыл бұрын
Please see the links in description. This wheels is from kliwon garage.
So weird. My brass tubing will not allow for hotwheels axles to press fit into. The whole is too small and my tubing is larger than yours. Annoying
Where did you buy the wheels?
@TolleGarage
Жыл бұрын
Instagram @hpz_diecast
Do you sell any of them
@TolleGarage
Жыл бұрын
Yes, but many of them have been sold. We can talk more about it on Instagram @tollegarage or email garasitolle@gmail.com 😊
Pakek velg merk apa tuh om
@TolleGarage
7 ай бұрын
Apa ya, kalo ga salah kage...tp udh ga produksi lagi
@vick_garage
7 ай бұрын
@@TolleGarage waduhh... Padahal keren tuh velg
@TolleGarage
7 ай бұрын
Iya, sekarang susah cari ban. Pada bikinnya velg yg pake aluminium gitu. Karet bannya gak keliatan.
Where do you buy all this stuff - the axels, the wheels, etc? :)
@TolleGarage
Жыл бұрын
I bought some stuff from my friend on instagram @hpz_diecast.
Hi, nice video. Where can I find 1.2mm tube? Thanks.
@rickpatman628
2 жыл бұрын
Craft and hobby stores. Some large hardware stores also stock them. If you can’t find the tube you can use an 18 gauge needle from a syringe.
@howenyu4668
2 жыл бұрын
@@rickpatman628 Appreciate it!
Was expecting a creator who would show me the lowering procedure without the use of those tubes (they don't sell these here) but that was the same old tutorial we've seen before. A pity.
@TolleGarage
2 жыл бұрын
No worries my friend, you can use cotton bud instead the stainless tube. But you need more adjustment. I will make the video if many people asking about it.
@schottys-diecast
2 жыл бұрын
You could also take a piece of 3x3mm PLA and drill a hole in the middle. But than you have to make more adjustemens on the interior and on the bottem.
@og_ice_freezer
2 жыл бұрын
@@TolleGarage Ok, I'll try using those as well. Curious as for how you do it though
@TolleGarage
2 жыл бұрын
Okay, I will make the cotton bud version for you 😊...maybe next week
I can almost guarantee that this person has that hot wheel because of fast and furious 1 because Conner o, Brien drove that as his daily or they also just like the truck but alot of people only know the truck from fast and furious so yeah
How to "lowering" 💀💀💀
@kirby454
11 ай бұрын
Hi cabbage juice
@user-hd2gl3ey6v
2 ай бұрын
Хз@@kirby454
@xFNFTREYx
Ай бұрын
I’m guessing it’s supposed to be How To: Lowering hot wheels
Your doing more then you need to