When I was little and collected these, I would have a friend who would tape his cards so it would be "water proof"

@alexeimoss5490

3 жыл бұрын

I'm traumatized

@virginman1234

3 жыл бұрын

What a smart kid

@olliemay5982

3 жыл бұрын

I had a friend that laminated them

@snipin4dayyyzgaming547

3 жыл бұрын

Lol

@starstudio8402

3 жыл бұрын

Lmao he’s screwed when that tape falls off

U can just tap the top loaders on the table to get the card farther down/up

@GaryJr530

4 жыл бұрын

Yea but that doesn't work on the card saver....ONLY the toploader

@kieranvarjavand

4 жыл бұрын

Watching him put the cards into the toploaders made me clench so hard 😖

@boofa10

3 жыл бұрын

Yay 100 th like Yes no one cares Including me ;(

@RTProductionz

3 жыл бұрын

@@boofa10 i care, thx man hahhaaha

@langtrout

3 жыл бұрын

Great tip when done safely

Usually when I put my cards in a top loader. I just gently bang the bottom of the top loader and the card will go in more without having to push the top of the card.

@SoundsAndMore7766

3 жыл бұрын

That is the correct way to do it. Pushing down on a card can change it from a 10 to a 9.

@saffronwatts5791

3 жыл бұрын

Where do you get top loaders from? :)

@heyscrub4937

2 жыл бұрын

@@saffronwatts5791 really just anywhere, target,eBay,Mercari and I think you can get them at TCGplayer

@berniderbear305

2 жыл бұрын

@@heyscrub4937 Amazon too

Dude, that binder is amazing! I'm definitely gonna get a few for my collection. Thank you!

Or u can smack ur top loader with ur card in it on the ground or the table until the card is fully in

@bc1173

2 жыл бұрын

best way is to smack in on your palm, doesnt cause a ruckus

Thank you so much for the information, this is what I was looking for. I came back to collecting after 9 years when Black and white base set were released. I was a kid and I didn't know about this :D

I highly recommend Dragon Shield's sealable sleeves. One sleeve that has no openings on any side. They are brilliant.

Instead of pushing the card into the hard back top loader with your fingers to stop any bending or damage you should tap it of a hard surface and the card drops in perfectly 😊👍🏻

You can also use silica gel to prevent humidity from warping your cards. Put a small silica gel packet in your binder or deck boxes and it’ll help keep them from warping

@geekedoutcollectingclips8457

3 жыл бұрын

Warping is literally the worst!

@yonitgupta5552

2 жыл бұрын

I did not know that wow

When it comes to sleeves, Dragon Shield's Sealable Sleeves are the objectively best choice. The sleeves get sealed so no dirt and dust gets in, which means that there's no need to double sleeve. And even if you do double sleeve, there's no longer any change of dust and dirt getting inside the inner sleeve, as it's completely sealed. Also, since you don't need to double sleeve, there is less plastic blurring the artwork while the cards are in a binder. All in all, the absolutely best choice.

@cutekirby360

Жыл бұрын

Does that work by simply using a standard penny sleeve (little wider)? Or would you still insist on using a perfect fit sleeve - and then putting that in the sealable sleeve?

@samidsanchez7620

Жыл бұрын

Hiiii

@MegaPieru3000

Жыл бұрын

@@cutekirby360 The sealable sleeves are perfect fits.

@guitardaddy6

Жыл бұрын

These tips from adults is objectively pathetic. The industrial revolution has had dire consequences for the Human race. May God have mercy on your souls.

@chubbyevee402

Жыл бұрын

Huh

Ive just started collecting again. This video will be useful 👌🏼

@jfrmdao-

2 жыл бұрын

i’m your 100th sub

I double sleeved my good cards. Perfect fit sleeve upside down first, then regular sleeve. That way you have complete seal. Then I put the double sleeved cards in to binders.

Nice video. Dex zipper binders are great too and they also have the Dex 12 option that fits 12 cards to the page. I always use penny sleeves because they are deeper than premium sleeves. Some of the premium sleeves are very short and the cards want to pop out of the top. Penny sleeves are also very soft and are less likely to cause scratches. The drawback to penny sleeves is that they offer less protection while sliding the card into the side-loading pocket, so you have to be extra careful to not put too much pressure on the side of the card while adjusting it.

For the top loader card sleeves you can tap your fore arm against each other with the sleeve in one hand. That way you can get your card in or out without worry of damage. I like the video! Thanks.

I like to sleeve every single card commons, un commons, rares, holos, ultra rares,...

@mkayden

3 жыл бұрын

Same lmao not enough sleeves

@linglingfan5710

3 жыл бұрын

@@mkayden yeah

This is gonna be a good one ☝🏻

They need to make a binder that can hold toploaders

@Monkey_Fwend

10 ай бұрын

There already is

Very informative. Thank you.

Found out what I needed. Thanks!

Hey Randolph! I was just wondering what sleeves you use for binders. I currently use dragon shield mattes, but they seem to be quite a thight fit. Will this damage the cards or the binder pockets, or will they be fine?

Great video thanks Randolph now I can organise my cards well thanks

This is what i needed Great vid Rand

legend video mate i have had my cards in a cheap folder for years terrified to get them out do you recommend the binder and sleeves for Permanent STORAGE of my cards then Mabey put the binder in a tin ? I want easy storage that will last me out but still be able to look at them once in a while

Hi! Thanks for the excellent video. Do you have a recommendation for where to buy these supplies from in the U.S.?

Thinking of getting a binder, been storing my cards in brown boxes that I have lying around. Will save up and get the Vault X ones, would rather buy it nice than buy it twice.

Are there any binders that fit cards while they are in a top loader?

Randolph with the standard top loader you can slide the card in and then tap the bottom of the top loader on the desk and the card will slide down further into the top loader

the legion dragon hide binder is legit ngl. ive gotten sent different ones over the years but the OG with the embossed helmet on the front is hands down the best dam binder imo! :P

I decided to try out the binder after watching this video. The next day I ordered two more. These are the best binders on the market.

Great idea. My mate has a load of base set Pokémon cards, but are all in horrible conditions. Love your videos man.

@josiahburciaga6959

2 жыл бұрын

Ok

@josiahburciaga6959

2 жыл бұрын

Pokemon is amazing 🤣🤩 I love Pokemon cause there awsome

@josiahburciaga6959

2 жыл бұрын

Pokemon cards are exactly the best in the world 🌍 and why I like Pokemon cards is ex and gx and v and seacrit rares and the best part of Pokemon cards are the awesome feeling that you get when you open a booster box or a booster packs

@josiahburciaga6959

2 жыл бұрын

Pokemon go on my phone 📱 is the best thing ever cause Pokemon!

Happy to see someone so passionate about pokemon cards.

Those deckboxes are noice. Thanks for the video

loved this video it was very useful thank you randy my boy

Helped a lot, Thanks!

Omg thanks so much for this just received the penny sleeves and binder. They are absolutely amazing.🏆🏆👍👍

When those binders are full with all double sleeved cards do the pages start to bulge out? the first few pages?

I see that fairy energy hoodie! Thanks for the video bro, got one of these binders myself! they're so good!

@kenneth8512

3 жыл бұрын

for someone new into card collecting this was a great vid ty :))

picked up a binder and the deck box with sleeves :)

I can guarantee you that the binders in this video are 100% the best binders for storing pokemon cards. Bought one a year back and ended up converting my entire collection over to them and still using them. Got various different sizes all equally great sitting on 13 Vault X binders currently.

@bc1173

2 жыл бұрын

these binders are known to bend cards, especially when they get more than 75% full

do toploaders fit in binders? also what pokemon cards should i put in penny sleeves and then top loaders? only the rarest or all of them? also are holo's considered rare?

You should take a look at Card Guardian binders as well.. exact same setup, but instead of the rubbery outside material it’s a like cloth, but much grippier.. I use both Vault X and Guard Guardian.. I’ve nearly ran out of colors in each (each binder is unique to distinguish between them) so I ordered a Top Deck 500 that is setup the exact same but holds 500 cards. My base set will likely get transferred to it along with Jungle, Fossil, and Team Rocket. Anyways, just wanted to drop and say, the Vault X is great, yes, but there are slightly better binders and binders that are just as good but different in one way or another.

The binder is actually really good, if vault X can do some that store 480 cards with a zip that would be great I only use penny sleeves when selling, my personal ones are in perfect fit sleeves then coloured ultra pro sleeves (black looks best)

@CardThrone

4 жыл бұрын

they already have this, check amazon. i've been loving vault x binders

So I've recently gotten into collecting and preserving some of my older pokémon cards using KMC Perfect Fits before putting them into sleeves that comes with the elite trainer boxes before finally putting them in a binder. Now a few months later when checking a few of them I've noticed some vertical ribbed patterns on the outer sleeves. Is this normal behavior of sleeves? If so, is it the KMC or Elite trainer boxes' that is the culprit and most important - will it somehow damage the cards? All help is highly appreciated :c

@Jerry-fo5oy

3 жыл бұрын

I was going to do the same thing with kmcs on bottom and etb sleeves on top, have u figured out what is the cause so i know?

@ErroTheCube

3 жыл бұрын

@@Jerry-fo5oy Did a bit of testing and it seems like it's the ETB-sleeves that, for some reason, starts to rib themselves. I haven't seen any noticable damage to the cards themselves, but I also dont want to risk it. The KMC alone does not show this effect. It also seems like sleeves by Ultra Pro works fine as well, just not the ETB ones.

@MegaPieru3000

2 жыл бұрын

Check out Dragon Shield's sealable sleeves.

@samidsanchez7620

Жыл бұрын

Wow

i didnt use your link as the shipping costs would be stupid high, but thank you for the video. Alot of my cards as a kid got ruined from bad binders and not knowing better, so as an adult im starting to preserve and there were so many options online, i went with vault x and 2 others to try, im very happy with it though so thank you for the help !!!

Do you have a suggestion for a box to fit cards with toploaders?

Do the sleeves come with the vaultx binder? I didn't see them listed in the description?

dope video brodie

I turn my penny sleeves upside down and load my cards from the bottom so I can use "top loading" card pages and still get 360 protection.

One of my neighbours would write their name on their card with crayon. I asked them why and they said so nobody could take it from them. I'm happy they didn't get any rare/good cards tbh.

@jfrmdao-

2 жыл бұрын

@K idk

@josiahburciaga6959

2 жыл бұрын

Pokemon! Pokemon is awesome 😎 cause I like the awesome ones 🆒 and Just because I like them!

Went to get one of those binders bro but out of stock when will they be back in?

Hey just want to know is the ultra pro poke ball binder good, i ordered it and its coming but dont know if its good? (Also ordered the 500 pack ultra pro sleeves, like you i love ultra pro)

I’m also based on the uk, so was wandering where you get your semi rigid card holders from?

Keep up the good work 👍

what sleeves did you use at the start in the binder????

How do you set out your cards in your binder?

yo do u buy the binder premium and it comes with the sleeves or i need to buy them too??

Should I use penny or more expensive sleeves like dragon shield if I just plan on putting them into my binder?

So can I use the ultra pro and send them to gradedgem or do they not except them

Maybe sb can help me. I have the ultra pro sleeves which are not perfect fit. Do they still fit in the vaultx binder or do i need perfect fit sleeves?

Just picked a binder up after watching this :)

thank you for helping.

I use perfect fit by kimchi and then into a vaultx binder, and for the cards that’s rare and I want to get graded I can’t find the semi ones, are the top loader ok for just protect them even more in the binder with penny sleeves I’m gonna buy those now or can I use perfect fit? I’m a new collector so I need help.

I bought the binder from your website, but can my card that are in penny sleeves be able to fit inside the binder?

Can a card that is in a hard case fix in a binder? Or do we have to pick between penny sleeve/binder and penny sleeve/hard case? I bought a shit ton of packs, and got a few VMax so I want to protect them the best way I can.

I have am collecting Pikachu and some McDonald promo cards. I store them with the penny sleeves first, put them into a stiff card sleeve and then have put them into dollar tree containers. The only problem I am running into is that dollar tree containers leave about half a card length on the end that is dead space. I want to store them into another container to eliminate the dead space but I don't know what to get. Do you have any suggestions? Thanks

Don’t push the top of the card to get it all the way in the top loader tap the bottom of the top loader on ur palm it will go in easier with out risking bending top of the card by pushing it

can the top loader sleeves fit in the binder?

I need advice I just started collecting cards and I'm using a ring binder that I already had and got the pages for card collecting and the perfect fit sleeves

Btw there's another thing called kmc sleeves that is basically another layer of protection for your sleeves to prevent dust from getting into your sleeves

I heard using a perfect sleeve and put another sleeve ,after that putting card inside card saver is the best way, is that true? what about using magnetic case? will it damage the card?

What is the best pokemon set for a beginner to collect?

how long to ship to east coast us? just wondering thanks

I wish these were available in Canada - international shipping is just rough on them. Sadge

@lvnn-hr3kb

3 жыл бұрын

Try ordering from Amazon US to Canada

im new to collecting pokemon cards and i store my cards in a binder will it damage the cards over time in the sleeves?

do you play with your cards/shuffle them? my dragon shields aren't bent like yours but i only use them for storage/display

guys i got a problem, i see Zip have advantages and also 3 D Rings have advantages, what do you prefer? and does really damage happen with D Ring binders?

this is the best guide!

I would like to have 12 pocket zip binder. Which model will be your suggestion?

FINALLY! a UK youuber!

Yeah these zipper binders are the best binders I think. Had the ultra pro PokeBall binder and it was ok but the zipper binder is way more protective

What I do is take two sleves a penny sleeve and load it upside down then take a rigid top loader and stick it in right side side up. It protects it from top and bottom for dust when moving cards. Also the ultra pros are better as they prevent shifting the less room around the card the safer the card from edge whitness.

@MegaPieru3000

2 жыл бұрын

Check out Dragon Shield's sealable sleeves.

I've picked up a vault x binder now and I can't wait for it to come

What size are those card saver top loader?

looks just like the leather side-loading Ultra Pro binder I have. Only difference I'm noting is the zipper although that is a major benefit

Do ultra pro penny sleeves fit inside vault x folder?

for my pokemon cards i use the tins and they are really good for my collection but i have been looking at binders though as i dont play tcg anymore!!

Hey randolph, i want that pokebinder but the site does not offer schipping to the netherlands.. can you fix that?

Hey randy I was wondering if your going to play the crown tundra

I know this was 3 years ago, but I did not see a follow up video for getting cards ready for PSA, could you make a video on getting them ready and how to submit them please!

did that binder come with the card holders?

Sleeve + Tab + Toploader = Perfect

Where can you find the side load sleeves and penny sleeves

Just ordered a binder and sleeves!

@rocknh3923

3 жыл бұрын

Was the binder good? Did it bend your cards?

Is there a binder for cards in a top loader?

I store mine in an old bidner with cheap 9 card binder pages, the only place I can get actual sleeves is online, I only found binder pages in the shops so I got some

Hey I’m getting a pakasi binder please answer if I should use i dont have any insane cards

Do toploaders fix the bended cards from the sleeves?

Would double sleeving cards be ok to store in a binder? One with perfect fit sleeve and sleeve?

do you make a binder with just your good cards?

I need help I kept all my cards in a ultra pro binder pack to sleeve and I just started to look at the back of them after years and all of them have whiting on the back of them now what happen