How to still keep your stock T5. With new Transmission Bellhousing, Clutch Master and Slave cyl
Автокөліктер мен көлік құралдары
For my LS Swap 95 GMC Sonoma new clutch kit with flywheel, new bellhousing, new slave cyl, hoses, everything I need for me to keep my T5 and drive train stock, "for now". (18 Years and Older).
Пікірлер: 94
This was STRAIGHT to the point and you wasnt talking non sense💯👏🏿
Thanks for the info and details on parts. You save me a lot of time and money. LSing a foxbody now can ran that OEM T5.
@MIC-LS
4 жыл бұрын
Yes sir, keep wrenching!!!.
I have been looking for this exact video because I have that same odd ball 94-95 gm T5 so thank you!!
@MIC-LS
2 жыл бұрын
You're welcome, I know this is going to help some people like yourself.
Looking good, I have Dad watch with me and he was smiling. He said, I know he does a good job!!
@MIC-LS
4 жыл бұрын
Thank you
Great info, very helpful, I have a 5.3 for my 99 Sonoma this is golden to me
@MIC-LS
3 жыл бұрын
Glad to have helped.
Thank you for the knowledge bro you just saved me big time
@MIC-LS
3 жыл бұрын
You're welcome.
Thanks for this video
You did a very nice job on this! Thank you for sharing all the video updates!
@MIC-LS
4 жыл бұрын
Thank you for watching!!!!
Best video I've found so far, are you using a stock 5.3 starter? Or did you have to get a different one?
@MIC-LS
3 жыл бұрын
New stock starter for 2000 Silverado 5.3
What car did you order the clutch kit from? And pilot bushing?
@MIC-LS
4 жыл бұрын
Hello,!! thank you the vehicle years was a 1999- 2002 camaro Z28 with 26 spline clutch to fit MY T5 trans with 26 spline and pilot bushing came with my aftermarket bellhousing and it fit perfect.
Does this bellhousing account for the tilt the camaros had? T5 mounted at a 30 degree angle
@MIC-LS
11 ай бұрын
No, it will not change, the 30 degree angle.
Doing the same swap . How did your t5 hold up to the power ?
@MIC-LS
Жыл бұрын
I was able to do a one peg burn out in a future videos while I was testing, I know T5 is a weak link. Now I am adding a VS Racing Turbo 78/75. For sure I will grenade the T5 if I'm not carefull.
Would this work for an s10 as well? I’m pretty sure they have the t5 in them too
@MIC-LS
3 жыл бұрын
Yes sir it will work.
would this bellhousing work with the fbody t5 transmissions? they sit at an angle
@MIC-LS
5 ай бұрын
It will bolt on, if you are using the transmission that belongs with the car. Just like my T5 GMC sonoma/ S10.
Did the kit come with the bolts?
@MIC-LS
Жыл бұрын
Yes it did.
Just curious about the stock t5? And the power of the LS. Just wondering how it handles the power
@MIC-LS
Жыл бұрын
it will handle it just fine as long as you don't power shift it. The bigger question is I am adding a turbo now.
@MIC-LS
Жыл бұрын
Soon after there is a video of me driving the Sonoma. Titled LS Swaped Gmc Sonoma Drive around town with Issues.
My 04 mustang v6 has a t5 trans can i put a ls to it
@MIC-LS
2 ай бұрын
T5 YES.
Was this the t5 that was behind a 2.2l motor?
@MIC-LS
3 жыл бұрын
Yes Sir.
I’m trying to put a t5 behind my ls but mine is a 14 spline do you know which cluch I could use that will fit?
@MIC-LS
3 жыл бұрын
Check the nv1500 or nv3500 clutch, when you look up a clutch in the description will tell you how many Splines are on it, research, research, research is what I did a lot of.
@joseayon4946
3 жыл бұрын
Make It Custom ok I’ll check thanks for the reply
Exact parts list and parts numbers please
@MIC-LS
8 ай бұрын
Ready Bell Housing-- Advance Adapters, @ Amazon part# 712548. Clutch/ Flywheel kit @ Advance Auto Parts MU50185-1SK. HoweRacing.com Hydraulic Slave CYL# 82876 Remote Bleed Kit ( stainless steel braided lines) 8287. Clutch master Cyl 3/4" bore #834.
Will a 91 s10 with 2.5 4 cylinder 5 speed have a t5 in it as shown with 26 spline?
@MIC-LS
2 жыл бұрын
Count the splines, there is a 10 count and a 26 count.
@MIC-LS
2 жыл бұрын
Should look like mine not like the muncie set up. The other T5 looks like the bottom were is mounted has long flange mounts in the front. Trust me you would be able to tell the difference just by seeing.
Any engine mods? How’s the t5 holding up to the LS engine?
@MIC-LS
11 ай бұрын
As long as I baby it, should last me.
@jwtru2life
11 ай бұрын
Oh okay, I've wanted to do this for a while. My engine guy tells me the t5 may not stand up to the torque and power of a LS engine
@MIC-LS
11 ай бұрын
@jwtru2life trust me the moment I get frisky I'm done for sure.
@jwtru2life
11 ай бұрын
You the best. Thanks for the update.
How's the t5 holding up?
@MIC-LS
3 жыл бұрын
T5 is holding up fine. It's because I'm NOT thrashing it from a dig. Doing normal shifts. I will upgrade to a better trans soon with this turbo set up.
Do you have the parts number for the howe throwout bearing that you used on the t5 thanks
@MIC-LS
4 жыл бұрын
Howe Racing Hydraulic throughout bearing # 82876.
@jeremyheaps2053
4 жыл бұрын
@@MIC-LS thanks for that I'm working on a s10 that has a t5. I'm putting in a 6.0 ls and want to keep the t5
@MIC-LS
4 жыл бұрын
@@jeremyheaps2053 It will work, just keep in mind any power shifting will brake the sychros inside. Enjoy it.
@jeremyheaps2053
4 жыл бұрын
@@MIC-LS is your still running or have you had to rebuild it. I have seen you have done alot of research for the parts that are needed have you every put together the whole part list for everything you have done
@MIC-LS
4 жыл бұрын
@@jeremyheaps2053 Still Running, check out my other vids on driving the sonoma if you haven't already. I will soon do a video with custom Hood Cowl New electric fan and testing (more driving).
Where did you get the hoses and brass adapter?
@bigpapatyr0ne732
3 жыл бұрын
Would -3an work? I can’t find a -4an.
@MIC-LS
3 жыл бұрын
Go to HoweRacing.com. I bought the hoses and Hydraulic Throwout Bearing and adapters from them.
@James-pp2qp
2 жыл бұрын
Part numbers for hoses?
@MIC-LS
2 жыл бұрын
You can go to Howe Racing Enterprises (HRE) or Summit racing part number is Same for both (HRE 8287 ) should be 2 hoses and a bleeder. Good luck
The 1/16th is the correct size for the spacers?
@MIC-LS
3 жыл бұрын
Technically is in between a 1/16th and 1/8th but I chose to say 1/16th.
@blacknotchNJ
3 жыл бұрын
@@MIC-LS thank you!
@blacknotchNJ
3 жыл бұрын
Sorry... the shims behind the throwout bearing, are 1/16th TOTAL?
@MIC-LS
3 жыл бұрын
@@blacknotchNJ The shims behind the Throwout bearing could add up to 1inch to 1.25 inch, as long as the space in between front of Throwout bearing and the pressure plate is about 1/16th of an inch of space or (gap). My apologies for the confusion but that is what I meant.
Will this work for a 90 Camaro with a 6.0?
@MIC-LS
2 жыл бұрын
Yes
@MIC-LS
2 жыл бұрын
Remember T5 can only withstand about 300 hp and if you do not shift like a madman.
The original engine was a 2.2?
@MIC-LS
4 жыл бұрын
Yes sir, a 2.2L.
@chippi3137
4 жыл бұрын
@@MIC-LS will that transmission actually handle a 5.3 for more then some burnouts and a couple pulls
@ronnelson7828
4 жыл бұрын
This trans may not last too long with a healthy 5.3, especially if you are doing some "spirited driving"!
@MIC-LS
4 жыл бұрын
I totally agree, and new bearings were installed on trans once let's see how long this one will last.
Can I keep the old master clutch cylinder ?
@MIC-LS
3 жыл бұрын
Nope, on A T5 the set up is for clutch and fork type. It will not work. On a NV3500 transmission, I am not sure.
@luisrocha4371
3 жыл бұрын
Thank you man I have a 2000 Chevy s10 and I already got the v8 so I’m just trying to get as much info as I can. I appreciate your videos!
@luisrocha4371
2 жыл бұрын
So today I finally took out the 4 cylinder out of my 2000 Chevy s10 but my manual trans is different from yours. The housing is a one piece to the trans, it doesn’t come off. Any suggestions ?
@MIC-LS
2 жыл бұрын
@@luisrocha4371 You my Friend have The NV1500.
@MIC-LS
2 жыл бұрын
Got some info for you. You have the same trans of this youtuber ( Name BeeterOlds Garage & Budget Builds) KZread specific to your trans Video title ( LS1 S10 swap Manual Transmission Update) he shows parts and part numbers used for you to be successful with your swap. This is right up your alley. Good luck.
What flywheel did you order
@MIC-LS
3 жыл бұрын
Thank you for the question, watch my video on how to keep your stock T5 the clutch kit part number does come with the Flywheel.
K
@MIC-LS
4 жыл бұрын
Sí.
What flywheel do you use?
@MIC-LS
Жыл бұрын
Comes in with the clutch kit, in the video shows part number for the clutch/ flywheel kit all in one.
@RC-mu7vc
Жыл бұрын
Thanks
@MIC-LS
Жыл бұрын
Kit is out of 1998 Chevy camaro. Flywheel did fit a 2000 Chevy Silverado 5.3L engine.
@RC-mu7vc
Жыл бұрын
Sounds good I am doing a s10 T5 with a 1994 camaro Lt1 conversion but the 168 flywheel is getting stuck inside
@MIC-LS
Жыл бұрын
You will pull thru, you are watching old vids hopefully next vid from me should be ok for the viewers. Goal is to get my new turbo spinning. To do some burnouts for the people.
this is now 1200 bucks
@MIC-LS
Жыл бұрын
Holy shit!!!