Great video, please add instructions on how to use the Split function to print a model that is too large for build plate area, how do you keep the other half of the model after you cut group is what i cant figure out.

A part of how to add support to get a more perfect model will be shown in the next video, it will be uploaded soon! And if you have any doubts about the video or if you have anything you would like to know, please comment below! 😁 Beginner Guide 2: kzread.info/dash/bejne/fa6BypawZbmXj7g.html

@stopbegging4likes

2 жыл бұрын

wtf are you going to upload it?

How to set layer exposure manually for each layer? I want to ensure that the transition between the 40 second bottom layers and standard layers of 2 seconds goes gradually. But after editing the layer exposure manually it doesn't save the settings, but resets to general settings. Please help.

How do I ad multiple different objects to the platform and edit them independently?

Share the download link for the software please

But why don't I have these options in the side panel like in the video? I can only get to them when I specifically go to set the printer I'm using, then they vanish...I enabled everything in the "View" menu but none of those brought it back.

Photon Mono X 6K under settings - Slice Parameters - Advance Control. What's the difference in the parameters numbered [0] and [1] Each layer control (bottom and Normal seem to have 2 sets of parameters. What's the default. Do I need to have all 4 parameters set?

My printer insists on adding supports instead of printing direct to the base platform, even though the part is flat. Any idea what parameter removes the supports on the base platform? Thanks.

hello there. i have a material which i want a different exposure time for each layer. for example the first 10 layers should have an exposure time of 2s and the next 10 layers must have an exposure time of 1s. how can i achieve this goal? please guide me because i could not find any guides on how to do it on your website

What is the difference / benefit between Basic Control Mode and Advanced Control Mode???

is there a way to create your own models?

How do I save to .wma or get printer to recognize other formats

I save a slice file on the hard drive but when i go to print it doesn’t appear on the printer

HELP!! got my photon mono x week ago, been struggling with it. The test file work perfect but i download files from online stl and use the photon workshop to slice it and convert it to pwmx. I load it to the flash drive, flash drive displays correct print i wan to print. hit print, begins to print..hours later should 50, 60, 70% etc but i look at the plate and it has built nothing. I am using the any cubic resin. please help?? what am i doing wrong.

i cant find all of the machines, and theres no mono. any fixes?

Today I bought Anycubic 3D printer. But there is no anycubic software ... How can I get this soft ware?

I run my computer through my tv. Whenever I open the workshop, I can't see the top bar. How can I reduce the screen size? I have to use the task manager to close the workshop.

Hello. So if Photon Workshop is used to prepare the model, what softwares can we use to make actual models from scratch? Like Blender, Inventor, or any other ones?

@PaleSalad

2 жыл бұрын

yeah blender should be fine and the just export as an STL

@Gearz-365

2 жыл бұрын

@@PaleSalad Thank you :)

@TheCollectorEdd

2 жыл бұрын

You answered your own question.

@christopherwilliams3293

7 ай бұрын

​@@TheCollectorEddMy guess is that he had an idea, but wanted additional recommendations. For instance, Fusion 360 is what I would recommend over Inventor. It's easier and you don't need all of those Inventor features for a homemade 3d model.

For some reason the program will not let me choose the Photon printer in the configure menue. It will only allow the Photon S.

I have a new Photon Mono, but the workshop program downloaded from the memory stick provided only has 3 options for machine types "Photon S, Photon, Photon Zero". In this video "Photon Mono" is listed. Which do I choose? Thanks Which do I choose? Thanks

@saccharine.sinner7795

2 жыл бұрын

i have the same problem but you just need to use the earlier version V2.1.26 instead of the V2.1.29

@floydporter3101

2 жыл бұрын

@@saccharine.sinner7795 This right here. Way more helpful than their whole site.

@starrlesscreative

2 жыл бұрын

I didn't even know to get the program from the thumb drive @w@ and couldn't find it on their website at all

@angelicartstudio4927

2 жыл бұрын

@@starrlesscreative I spent about 45 minutes digging through the website to finally find the program to download (I think that it was listed waaay down under the product description….. not a user friendly website when it comes to finding the extras you need, just for spending the $$

What software is this?

WHERE TO GET IT? The link from your website points to 2 years old version of it.

I have a new Photon Mono, but the workshop program downloaded from the memory stick provided only has 3 options for machine types "Photon S, Photon, Photon Zero". In this video "Photon Mono" is listed. Which do I choose? Thanks

@jeanlouisandreck1180

2 жыл бұрын

same problem here!

@arigatoespacialsuperadmiti7316

2 жыл бұрын

hmmm maybe it requires to downloag a more recent version from their website, that's what I did, my printer is a Phothon Mono x.

@omareereynolds571

Жыл бұрын

@@arigatoespacialsuperadmiti7316 can you use a mac

hola, tengo una photon mono 4 k donde descargo el programa?

@lunamagica9807

2 жыл бұрын

Hola , no soy una experta en este tema , el pen drive que viene con la maquina tiene unos archivos de la version correspondiente de cada maquina , tienes que descargarlo , en mi caso es v2.1.24.

Hello I have buy the photon zero and I have stl files I fix it with your program but they dont save it to me in pw0 file and the printer didn't read it. How I can change this ?

@Ricky25166

2 жыл бұрын

I'm having the same thing bro

@pata3075

2 жыл бұрын

Same 🙄

@mariosgalanis4356

2 жыл бұрын

@@pata3075 press the blue button in the left of your screen and you can fix it with this

Mine was just updated to the latest new update it's all white now the background and the supports you cannot seem to change from hexagonal now and gives a perforated raft base! It's horrible it's very very very very limited theres actually no point in this slicer it doesn't work for me

i already have a great video for this on my channel. also has the best settings for supports

What is the ideal exposure time for a layer thickness of 0.02 with Water resin?

@ANYCUBIC3D

Жыл бұрын

Hi dear, 1.5s is better : )

@danieleraviglia4012

Жыл бұрын

@@ANYCUBIC3D fantastic! Thanks a lot

@danieleraviglia4012

Жыл бұрын

@@ANYCUBIC3D I tried with 1.5 of exposure time and 1 sec of off time with 0.02 mm slice...the models are precise but even though they are hollow there is still some uncured resin. Do I go to 2 sec time exp ot 1.5 sec off time?

How do I change stl to pwo? I'm trying to print but it won't show up on the printer

@ElijahGartin

2 жыл бұрын

I had this issue because I downloaded the wrong version off their website. I had to install the photon workshop that came on the USB stick. hopefully that's your problem as well. Good luck!

@dnafpv

9 ай бұрын

@@ElijahGartinwhat if that’s lost?

@ElijahGartin

9 ай бұрын

@@dnafpv I'd contact their support. I think I actually ended up off of Photon Workshop and using CHITUBOX version that support gave me. It's been a while, but definitely recommend reaching out to their support.

seems outdated? just downloaded it and mine doesnt have slice settings or machine settings.

Bisakah tombol subtitle diaktifkan ? Teriamakasih

What is the correct sliced file to choose for the 4k mono it's not in the configuration settings? I need pwma!? These save as pwmo pwx no pwma? Anyone know?.thanks😊

@ANYCUBIC3D

Жыл бұрын

Hello, add Mono 4K ((383 x 227 x 222 mm) ) printer setting into the Workshop, and don't forget to modify the suffix by pwma when saving the sliced file.

how do i update the software ? the site only has V2 121

@ANYCUBIC3D

2 жыл бұрын

drive.google.com/file/d/1sXP1IIZUzZwKVist6NN_yHK-Q1q85EFz/view?usp=sharing

How do I bring my file over to the printer I’ve tried to save it to the usb many different ways and it’s not showing up on my printer.

@batingbunnies

2 жыл бұрын

Are you hitting the little button at the on the left side that looks like a bunch of layers stacked? That's how you actually slice the model and prep it for the printer

@seth1371

2 жыл бұрын

@@batingbunnies I actually figured that out after I posted the question. The problem I have now is when I print it doesn’t stick to the platform. It stays in the resin vat and the first couple layers solidify to the bottom. I’m messing with the numbers in the program to see if that’s what was messed up.

@ANYCUBIC3D

2 жыл бұрын

Hi, sir, what printer are you using? You can use a USB flash drive. When you buy our printer, the package list includes the USB flash drive. After you slice it, you will get a slice file. You only need to copy it to the USB flash drive. 😊

@ANYCUBIC3D

2 жыл бұрын

@@seth1371 Hi, sir, Sir, if the model does not stick to the platform, first, you need to confirm whether the platform is leveled correctly, you can try to level it again. Then you can increase the exposure time of the bottom layer, about 50S-60S, or you can increase the number of printing layers 😊

@emilianogiusto7890

2 жыл бұрын

@@batingbunnies thank you for this just saved me a whiiiiiiile more of messing around with this

donde puedo descargarlo

Does this work with Anycubic Kobra?

@ANYCUBIC3D

Жыл бұрын

Hi dear, if you use fdm printer, please slice with Cura : )

@SHAUNADAMFRANCIS

Жыл бұрын

I tried Cura and with a usb C cable but it won’t let me print

is there a Mac version?

@omareereynolds571

Жыл бұрын

Yes had a hard time but I found it

how the heck do i get an image in the workshop in the first place?

I can't even get mine installed. It keeps flashing OpenGL errors. Saying I need version 2 or higher. I in fact have version 3 installed so I don't get why i am getting this error and the people at Anycubic don't appear to understand English.

@ANYCUBIC3D

11 ай бұрын

Hi there, thanks for your feedback, and sorry for the inconvenience that we brought to you. Could you please try again to download the latest version as below: drive.google.com/file/d/1WN8CvY-iWl_r7oLme_eM87-yy-O-bqOm/view

@SmeeUncleJoe

11 ай бұрын

@@ANYCUBIC3D I reinstalled it and get the same error screen complaining about my OpenGl no being version 2 or higher. I am in fact running version 3.1.

oh...I only save .pwma...not .pwmx what is problem?

@ANYCUBIC3D

2 жыл бұрын

Sir, you need to select the machine😊

My photon workshop won't open

@shadowoulfarc5311

Жыл бұрын

Neither does mine I don't understand why the software wont-work. I've looked everywhere for it And I still can't locate the software. Honestly I think the software is broke

Can you update that application more better ? It is damn bad MONO X

Only works if you can get into the USB drive so you can get the software off of it , also the website isnt showing the link for the software . So here I sit with a brick on the counter that does NOTHING . I regret buying this thing and wish I spent a few more dollars on another brand I was looking at to start with .

@madmouthmarv5098

2 ай бұрын

Ever get it to work?

@docroberts1988

2 ай бұрын

@@madmouthmarv5098 Only after they sent me updated software that wasnt on the website link . What they had on the link was outdated . But by the time I finally was able to get it to work( Month or so later) I bought another brand and it worked perfectly out of the box . As it is though this printer is under the bench in the box still as an emergency backup .

yeah that shit don't look like what i have. I dont have a machine type to choose

🙈 why using a voice reader?

@UrueWhisperwind

2 жыл бұрын

It's a Chinese company.

Oh my god. The software screen resolution cant be higher than 1600. Then the support side disappears. If did something like this at work I would be shot

this is out of date

Is this narrated by an AI? Good grief, anycubic.

This video is worthless.

I had my printer for a year and still haven't been able to use it because the flash drive isn't working and the printer doesn't want to print anything. I am hoping I can get some help with this please @anycubic

@ANYCUBIC3D

6 ай бұрын

Hi there, For after-sales support, please submit a ticket at: bit.ly/46MO1vh. If you don't receive a response, check your spam to avoid missing information. After-sales engineers aim to reply within 24h on working days, but please expect delays during holidays and peak periods. For self-help solutions visit: Anycubic WiKi bit.ly/46NZ7Qx