Respect to him still helping everyone even after one year in the comments

Respect for helping people even when you have -24 driver points🗿😭

@Noname-CB

7 ай бұрын

😄

I play this one too, it’s quite hard but fun when you get it right. A tip is to use the pole catcher wrench by right clicking on the circles were the wires come from so they are activated. That way if your poles come off they don’t go flying everywhere and return to the top of the bus. You should also try stepford county railway.

@Noname-CB

2 жыл бұрын

Yes, it is difficult at first. The pole catcher on the one hand is useful but on the other hand you always have to carry this tool with you. Thanks for the suggested game!

@superflip1729

2 жыл бұрын

@Charlie you are kinda like me

@teevasu.t

2 жыл бұрын

Thanks, I am near to make my computer fly for the pole keep flying off.

@deltalegacyone

Жыл бұрын

It’s easier to focus your camera on the wire to attach poles

@starflight_wof39

Жыл бұрын

@@Noname-CBtry british railway

Didn't expect to know you play ROBLOX too. I am a developer of a British transport simulator, Destination: Benford, which is currently undergoing development.

@Noname-CB

2 жыл бұрын

I didn't play Roblox before I learned about this game. " I am a developer of a British transport simulator, Destination: Benford..." - Very interesting! I will try it.

Thanks for the video it's will useful for me

The best trolleybus game!

@Noname-CB

Жыл бұрын

For the time being, yes.

So cool

thank you very much for letting me know how to start

Eu nunca imaginei assistiria a um vídeo de Roblox de Trólebus, foi legal o vídeo, porém prefiro as séries de Sovietic Republic e de Cities Skylines.

@Noname-CB

2 жыл бұрын

I decided this to be one of the special videos for the 100th episode of W&RSR. Otherwise, the other series continue.

Ngl now that im used to attaching the polls its kinda easy now

What to do when there is a ringing sound and the bus will not move ?

@Noname-CB

Жыл бұрын

The rods have come loose. In other words, no power.

Is it normal for Reverser wrench to not work because when I try it doesn't work

@Noname-CB

Жыл бұрын

No it's not normal. There are two options: the first is that you are doing something wrong and the other is that there is a problem with the game.

Please make a tutorial on starting buses in Sunshine Islands

@Noname-CB

20 күн бұрын

I haven't played this game. I'll take a look...

When I drive, my poles always disconnect but I didn't do anything wrong, did I forget something?

@Noname-CB

11 ай бұрын

Do you drive fast through the switches? By the way in laggy servers it is more likely to disconnect the poles(these are my observations I don't know if this is the case). Try a singleplayer.

its a nice game, but can you explain this? i follow every step of this video, the bus starts and works normally, i get to the depot gate, and it doesn't want to move right after, please help if you can

@Noname-CB

Жыл бұрын

Most likely the poles of the trolley are in a switch. At least I haven't seen it mentioned anywhere, but from the experience I have I know that I have to make sure that the poles always go through the switch and not stay in it because the trolley will not have power. In the game (I don't know how it is in reality) there is power only in the "wires" but not in the switches.

@Kalafior2001

Жыл бұрын

@@Noname-CB nvm it was not switching Control circuit back, thanks tho

In this game can we have a gps or a map of the road?

@Noname-CB

2 жыл бұрын

As far as I know, there is no such thing, but I'm not sure. You can find a map of the lines in the discord server. (driver-guide)

@HoovyGaming

2 жыл бұрын

well from what i know theres this purple line now that shows up when you put all the boards for the line

can you drive the Ziu 682 or the 10 bye the way cool video dude

@Noname-CB

Жыл бұрын

I have videos with 10 and thanks!

Instructions unclear I am now locked outside the bus

@Noname-CB

Ай бұрын

Aww yes that is possible...

what spawn did you click?

@Noname-CB

2 жыл бұрын

The depot on the main island

How do you change your pole routs like if it splits into two how do you make it to where you go the way you wanna go instead of where it takes you.

@SullyB.

2 жыл бұрын

If you control circuit is on you go left if it is off going through the switch you right, make sure to turn it back on afterwards so you can accelerate

@Noname-CB

2 жыл бұрын

As @Sully B. explained to go left you just need to start accelerating (W). The right is more specific, because in principle if the compressor works you have to turn off the control circuit (E). But if it doesn't work, I personally switch without turning it off, you just don't have to do anything until you switch. I guess it seems confusing, but if you don't understand what I mean by the previous sentence, just do what I described above.

bro i can see me in the end of the video🤣

@Noname-CB

2 жыл бұрын

What's the chance😄

Soviet era trolleybus.

@Noname-CB

2 жыл бұрын

Yep

Can you do tutorial at Hardbass Depo? :(

@Noname-CB

2 жыл бұрын

This part of the map is currently unfinished.

@jace3121

2 жыл бұрын

Hardbass Depot is practically the same concept as the Main Island.

One big question.How can I know where to turn?

@Noname-CB

Жыл бұрын

I think there was an option in the settings whether lines should be displayed above each intersection showing the direction of the particular line you are moving along.

I can never turn the sequencer on. it justs flicks off again

@Noname-CB

Жыл бұрын

Same here.

Why is my bus derailes the lines everytime when turing left and right then dies?

@Noname-CB

2 жыл бұрын

Well, for example, too high a speed, worn pole heads and remember that when you want to go to the right you do not have to press the accelerator pedal. Also, if your compressor is still running, to switch to the right you will need to turn it off (E) and after going through the switch, turn it on again. Going left is easy - just press the accelerator just before the switch.

@applejack9371

2 жыл бұрын

@@Noname-CB Thank you so much for advise 😊

mn eu segui o tuturial todo mais quando eu vou apertar ali na sequence ela nn vai como faço pra consertar

@Noname-CB

7 ай бұрын

Try to hold on.

how can i go forward?

@Noname-CB

Жыл бұрын

When you prepare everything correctly with the left button set the direction to "forward" from the reverser lever. I have no idea where your problem is... Maybe you're missing something?

sequence isn't working what i need to do ?

@Noname-CB

2 жыл бұрын

Restart maybe ... it's a matter of many possible reasons and solutions

Btw try ro-320

@Noname-CB

2 ай бұрын

👍

Hello i have a probleme i can t turn on sequence

@Noname-CB

Жыл бұрын

Me too

why i cant find the adjust reverser thing

@Noname-CB

11 ай бұрын

What exactly can't you find? It's under the seat. And the handle itself is in the tool bag.

I can get my sequences button on help

@Noname-CB

Жыл бұрын

Hold it when you need it.

Can you help me with the sources it won't turn on I clicked it and it won't turn on

@Noname-CB

Жыл бұрын

Are you sure you are following the steps correctly? And does everything before that work? My advice is to try again and watch carefully because you might be missing some small detail.

@RobloxainYTPlayz

Жыл бұрын

@@Noname-CB Ok by the way you can probably add me on there. My username will be gethio8InMyOldAcc if you add me as a friend on there, you can probably teach me some more

When i turn my sequencer on, it turns off automaticly, what do i do?

@Noname-CB

Жыл бұрын

I can't think of anything other than a bug right now.

@thatunionboy

Жыл бұрын

@@Noname-CB lol, i already solved the problem :D

@andrewforest6905

Жыл бұрын

@@thatunionboy what was the issue? Having the same issue.

@thatunionboy

Жыл бұрын

@@andrewforest6905 Well you just need to hold the sequencer for a time i think, if your bus doesn't move, check the motor breaker and try to change the ropes you are on.

👀 Google brought ya here? Give this comment a 👍, man.

@Noname-CB

11 ай бұрын

👍

and swicht of sequence is very bugged

@Noname-CB

Жыл бұрын

A lot of people think so...it would probably be good if the developer change the way this button works.

how do i zoom in and sequence isnt working for me either

@Noname-CB

2 жыл бұрын

"M"

@CrazyPlayss

2 жыл бұрын

@@Noname-CB yeah just figured it all out lol

@Noname-CB

2 жыл бұрын

👍

@CrazyPlayss

2 жыл бұрын

@@Noname-CB ye I also have a question what’s the longest line in this game?

@Noname-CB

2 жыл бұрын

In my opinion, the longest line is 10.

how to enter the dc of this game? I'm not getting

@Noname-CB

Жыл бұрын

What is dc?

@noob-cz8mu

Жыл бұрын

Umm just go to the game, and at the description scroll down , You will see

When i try to drive when i am all set then its A2 and i cant move

@Noname-CB

10 ай бұрын

Depends on the trolley model but looks like a problem with the switches behind the drivers seat.

@Redpoo227

6 ай бұрын

check the main breaker, it goes out at random times

How do i join the discord server where is the link

@Noname-CB

4 ай бұрын

When you get into the Roblox click on the game(don't run it) then scroll down and you will see the discord logo which is a link to the server.

can you tell me how to prevent the pole from getting snapped :(((

@Noname-CB

2 жыл бұрын

Of course ! - Replaced pole heads reduce the chance of the pole derailing. - Also, one of the most important things is speed. - Now I will share some personal impressions about the speed: * We all know that we have to go through the switches slowly (15-20kmh). This is probably the most appropriate speed with which to go through the switch. * Another thing that I noticed and which is quite logical is that at a high speed of about 50 kmh it is quite likely to derail even on a straight section. - Summarized - change the pole heads; pass at low speed through the switches; reduce the speed on sharp turns and on straight sections and do not exceed ~ 50 kmx. I hope I helped.

@dinonugget2306

2 жыл бұрын

@@Noname-CB THAKN YOU THANK YOU THANK YOU SO MUCH!

@dinonugget2306

2 жыл бұрын

@@Noname-CB oh and do u have the link to their discord so i can check the map or something...

@Noname-CB

2 жыл бұрын

discord.com/invite/QNY3XG3

@MajorAce_usedtobeMechchad

11 ай бұрын

@@Noname-CB My pole snaps even in depot when i have serviced the pole heads, when i drive like 10 kmh and follow the lines. This game is just made to be frustrating!

imagine seing "antidisestablishmentarianism street" 💀

@Noname-CB

11 ай бұрын

😩👍

How do you get -24 points?

@Noname-CB

4 ай бұрын

This happened when you ran a red light.

How do you know where to go??

@Noname-CB

2 жыл бұрын

There are line maps in the discord server in the driver-guide section. You need to go around a bit and you will learn the map.

Yo, it’s me again, now my problem is gud now, I can finally drive out the starting place, but my wire poles kept on fleeing away and my bell rings lol, anything I need to know or prevent? It’s so hard to face this problem every time, imagine this kept on happening in real life 😣

@J0rdanYu

2 жыл бұрын

Btw already did go slow by the switches like 15km somethin, and I also maintain the speed of 35-40 km per hour, idk why but it just fells off even on the speed if 31 km per hour, and the alarm bell go riiiiiingggg or brrrrrrr meme XD

@Noname-CB

2 жыл бұрын

I can tell you the following: - I guess you know you need to change the pole heads -passing through switches and the like should not happen more than 15 km / h (for the safest) -I noticed that the number of people on the server probably affects these things but I'm not sure. Therefore, you can create your own server in which only you can play and possibly your friends if you invite someone. I can't think of anything else for the moment

@J0rdanYu

2 жыл бұрын

@@Noname-CB I did change the pole heads, maybe I should be more careful when driving 🤣🤣 ok thx

bruh I thought that it would automatic. know where you need to go....I lost contact so many times. Now I feel like a idiot.

@Noname-CB

2 жыл бұрын

It is difficult at first, but after some practice it becomes easy.

How can you drive backwards?

@Ren4RR

2 жыл бұрын

turn the reverser backwards which u get by tool box

@Noname-CB

2 жыл бұрын

At 0:53 you can see how i take the reverser wrench and put it on. It determines the direction of movement. If you left-click on its upper end it will move from neutral to forward. To move backwards you have to right-click - this rotates one position backwards. If it is in a forward position and you want to move backwards, you have to click twice.

bro what the hell the sequence keeps turning off like i cant even turn it on bruhh

@Noname-CB

Жыл бұрын

Same here.

bro how to zoom?

@Noname-CB

Жыл бұрын

With "M"

what is the edior app?

@Noname-CB

2 жыл бұрын

I use kdenlive to process the videos.

@TacoPro.

2 жыл бұрын

@@Noname-CB is it money for it or is it free?

@Noname-CB

2 жыл бұрын

It is free.

@TacoPro.

2 жыл бұрын

@@Noname-CB idk how to use it lol

@Noname-CB

2 жыл бұрын

It is similar to other such programs. Watch tutorials.

and how to zoom?

@Noname-CB

Жыл бұрын

"M"

@mozdonyfan4154

Жыл бұрын

@@Noname-CB thx

How do i reverse?

@Rochefort-Frank_1

2 жыл бұрын

Press right mouse

@Noname-CB

2 жыл бұрын

See 4:01. Use the mouse buttons - left -> 1 position forward, right -> 1 position back.

it doesnt work for me no video works for me

@Noname-CB

Жыл бұрын

What exactly isn't working for you?

@noob-cz8mu

Жыл бұрын

@@Noname-CB Maybe bus not starting?

It's not working

@Noname-CB

11 ай бұрын

What does not work?

This game is broken

@Noname-CB

Жыл бұрын

There is something like that... But so far it's the best I've seen.

@roemerjonker284

Жыл бұрын

@@Noname-CB I get always -100 points

@roemerjonker284

Жыл бұрын

@@Noname-CB red light skip -30 an earning points is really low

@gunawanreivawibisana9665

Жыл бұрын

@@roemerjonker284 hmm thats why

@noob-cz8mu

Жыл бұрын

@@roemerjonker284 don't skip red lights then lol

Its fake

@Noname-CB

Жыл бұрын

Which or what?

@Wotomolon

Жыл бұрын

Cus you can't do it

@Noname-CB

Жыл бұрын

I don't understand what but okay.