Wow I never thought of this way, but I do it a different way, I thought I'd share it with you and everyone in the comments. This technique works if you are using female wheels to a tamiya kit, or any kit that has a little pin on the wheels to connect them. First, find the brakes you'll use. Doesn't matter if they're stock or custom, as long as you can make a hole in it, itll work. You then enlarge the hole until the brake can slide over the female nub, then to lower it you just glue the wheels higher up and to camber it, you get that suspension price that you'll connect to the wheel, and file it at an angle so when you glue the wheel, it glues at an angle. This technique works with something like aoshima wheels onto a tamiya kit This is my way of lowering or adding camber to a model car kit, the front is similar except usually with tamiya kits, the piece that glued to the wheels is separate because they need to turn, you basically do the same thing with that piece and file it an angle.

Holy shit the front camber is genius. Cant wait for the final build

Now that mystery (to me) revealed. Thank you. so simple and the advantage of not having to scratch build a bunch of parts 👍👍👍

This is helpfull as i am in the preparation phase of a 1967 vw beetle from hasegawa never done anything from this company but the body painted upbl nice and it looks pretty quality so well see how it works

Will this work on Fujimi model kits? I've ordered my first kit from Fujimi a Honda Civic Type R (EP3).

Great video now I can stance my new R33 thanks a bunch such a simple video but gotta love

@michaeltakaichi2658

7 жыл бұрын

Daniel Otero make a video when it's done so I can see the stance

@danielotero8327

7 жыл бұрын

Michael Takaichi I am not sure about a video but I will post up or send you some pictures most likely I will put it up on Scaledworld.net

Any ideas the best way to lower a model truck. Currently working on a modified peterbilt.

i had a Revell BMW 318i kit it came with a rod that was cut in half and a rubber hose you slid shafts into this made shafts move at different rates at center. It created the desired negative rear camber. I'd imagine the same effect can be done to front suspension. Feel free to implement. Its Revell idea, I'm just sharing

I have a question, I hope you're reading this. How do I make the wheelbase wider to fit wide bodykit cars..I'm planning on making custom widebody on my tamiya gr supra. Thanks.

Nice Thanks for this Tom :D

Just one question,when you bend the control arm upwards to the hubs at the front, do you apply any kind of heat at all to it ? I'm a bit worried if it will break on the kits. Thanks for sharing.

@TheScalemodelingChannel

6 жыл бұрын

+Seekers Powerbuild Motor Mechanic heating them is a good idea if you don’t want to run the risk of breaking them.

Since you cut and sanded the top of the shocks you should have sanded them off and made your own using jewelry wire to really give it a nice look.

i've seen several videos of this process and not one shows what the final result looks like

@TheScalemodelingChannel

11 ай бұрын

kzread.info/head/PLml5qXMU9oOR_2y1gms_i6lFH4-EHSmfP

I liked the credits

What if the model uses leaf springs in the rear?

@joakimkarlsson9255

7 жыл бұрын

Do it like it´s done on the full scale cars. Cut the rear axle from the leaf springs, make a pair of lowering blocks and insert them between the axle and the spring.

@jesvinjoy2122

7 жыл бұрын

+ Joakim Karlsson Thanks a lot, that really helps!

@kylesagun156

6 жыл бұрын

You could just remove the springs or make a new shorter one.

what brand and size is this car?

@TheScalemodelingChannel

5 жыл бұрын

Tamiya 1/24

😍😍😍😍😍

круто!

How to lowering and stance mazda rx7 tamiya 😞 help pls 😞

@TheScalemodelingChannel

7 жыл бұрын

+MrShg the same way as this one

@Dawid283

7 жыл бұрын

Nope 😞

@gasketsnotyetblown9467

6 жыл бұрын

MrShg yep

Are you going to cut and buff the car

@TheScalemodelingChannel

7 жыл бұрын

Nope

I just make the whole suspension, check it out

can i have it

Oh hey, pop up :)

Can I do this with a real car? xD

Are you on instagram?

@TheScalemodelingChannel

7 жыл бұрын

+Calvin MTechnica nope

@haydenreyes4621

6 жыл бұрын

Calvin MTechnica he is now

What about Aoshima cars

@TheScalemodelingChannel

6 жыл бұрын

pretty much the same

@menetric12

6 жыл бұрын

The Scalemodeling Channel Okay but what if I don't have a drill you do?

@TheScalemodelingChannel

6 жыл бұрын

use an exacto blade to make the hole, improvise. Don;t be affraid to try ;)

@menetric12

6 жыл бұрын

The Scalemodeling Channel I'm afraid that I will break something :/

@menetric12

6 жыл бұрын

The Scalemodeling Channel Update my custom rims won't fit

Dang it 21 comments

Succinctly put.

Fucken ricers😂😂 geen haat!

@kylesagun156

6 жыл бұрын

R.B.V. fishingteam yeah but he's no ricer