www.paypal.me/PHARRAWAY Grant 7 AutoWorks store buycustompaint.com/ #METALFLAKE #PHARRAWAY #CANDYPAINT
Жүктеу.....
Пікірлер: 256
@krazykozey2259 Жыл бұрын
I already know how to spray, but I must say your technique is what newbies need to learn. Great content.
@alpeterson3 жыл бұрын
I gotta say, I’ve been getting really cynical lately, burned by a lot of crap going on in the world. I came to the comments expecting a bunch of racist comments and racist jokes about LatinX people and instead I’m so blown away by how much positivity and warmth there is. So many supportive people just showing appreciation for a guy who’s seriously talented and teaching others. Ya’ll gave me some hope again. Thank you!
@PHARRAWAY
3 жыл бұрын
Anytime brother that is what its all about
@daveyrock6521
3 жыл бұрын
Hell I always thought Mexican/Latino(a), Puerto Rican, or any other Spanish sided ethnicities had the custom touch. Whenever I see a custom paint job, airbrush, metal flake, candy, or metallic, it’s usually always done by them. Brilliant work I see. I’ve noticed over the years that certain races have certain skills, simply that no one else can master.
@alpeterson
3 жыл бұрын
@@daveyrock6521 I mean, I wouldn’t say specific races have talents others don’t, but I’d say certain cultures are known for strong talents in different areas. Mexican and Latino culture has deep roots in low rider communities so I agree with the amount of talented painters coming from there is super high.
@three27sbable4 жыл бұрын
Another fantastic video man, thank you so much for sharing your knowledge, I'm learning so much from your content. So excited to start playing with flake,Kandy,masking, airbrushing ect.
@FernandezCycles4 жыл бұрын
I’ve been looking for a video like this for weeks! Thank you!
@Grant74 жыл бұрын
Keep teaching the people my brother...
@garybrooks27534 жыл бұрын
That was awesome I noticed you used a lot of flake in that,thanks for the demonstration!👍👍👍. ✌️
@illecebris87094 жыл бұрын
Wonderful! This is the best flake spraypaint tutorial on youtube. Thanks a lot bro for the info about te nozzle- and compressor pressure settings. Much appreciated and see you next transparent paint job! 🤝
@PHARRAWAY
4 жыл бұрын
anytime brother
@tonyselby72714 жыл бұрын
that was Great I have been doing paint and body for over 30 years and i have never tried to do metalflake really didnt know how to do it. thanks for showing this look forwad to the other videos on this, thanks again
@PHARRAWAY
4 жыл бұрын
Anytime brother
@FernandezCycles4 жыл бұрын
So I did it, I sprayed flake. I had a lot of problems with my 2 mm gun clogging and the only thing I could do was pour out the flake back into my mixing cup between coats and spray a little solvent through the gun. Less than idea but it got me through the process. I’ve seen guys toss a couple nuts into the paint cup on their spray gun to get things moving. I used a much larger flake though. I sprayed Candy Shops .015 flake, looks good now with a HOK Kandy Apple Red. It was a serious process though.
@coyboybc2 жыл бұрын
Wow 🤩 looks amazing! Got to subscribe cause I am doing my second flake paint job soon and you are showing me things I wasn’t sure of doing!
@barnstormerr Жыл бұрын
This is the best flake video I've found. Thanks for the tips!
@PHARRAWAY
Жыл бұрын
Anytime
@reginaldfitzpatrick8681 Жыл бұрын
Yo, thanks so much for the info! This is super helpful and easy to follow. Much appreciated
@bryanpelleschi36352 жыл бұрын
Great work I’ve gotten better because of you keep it up
@PHARRAWAY
2 жыл бұрын
Nice
@vicshonebethel99344 жыл бұрын
That looks so beautiful mixing in the cup 😁👍
@manonfirelj3 жыл бұрын
Your video was a lot of help. Keep up the good work.
@husky12324 жыл бұрын
Great video one day I will try spraying flake thank you for the video
@The88katana6004 жыл бұрын
nice I'm getting my crown vic ready to flake the roof :) thumbs up
@Okie-Tom4 жыл бұрын
Back many many years ago I sprayed several cycles and helmets with Metalflake! What I used was an good ole Binks #7 spray gun that had a cup that had an air powered magnetic paddle inside the cup that would keep the Metalflake suspended. I still have some of those boxes of Metalflake! Lol! Tom
@PHARRAWAY
4 жыл бұрын
That is one nice gun I have mine in display
@edwarddollbaum5671
3 жыл бұрын
Best spray gun ever in my opinion. Back in the day i painted with that gun ALOT of cars. I sprayed alot of Amer-flint on cars in Florida. The only paint that would last in the sun besides Imron. The 36sk head would spray metal flake nice. Very coarse flake. Heavy gun that a man had to use! I used to have a strong back and a weak mind. Now just have the weak mind. Lol
@DavidBrady-wf6qh11 ай бұрын
Your Awesome, my friend. Love learning from your video's!
@jorgecastellano72653 жыл бұрын
I'm learning I appreciate it god bless very helpful
@PHARRAWAY
3 жыл бұрын
Thanks
@theidealist9793 Жыл бұрын
Thanks fir doing this bro, great work!
@ironhorse192 жыл бұрын
Excellent video many thanks for sharing
@artguess98933 жыл бұрын
Awesome vid bro thanks for sharing your knowledge!
@PHARRAWAY
3 жыл бұрын
anytime
@rolandwillems1 Жыл бұрын
Love it! Great video
@emptyjar02 Жыл бұрын
Great job man 🤘
@omicronvariant72792 жыл бұрын
Nice video. Thanks for this! 🍻🙏🤘
@k5blazn4 жыл бұрын
Awesome video, thank you for sharing, you got yourself a new subscriber 👍
@nearheaven53114 жыл бұрын
Good info!!! Thanks
@SprayWayCustoms4 жыл бұрын
Keep it up Pharraway . I enjoy these vids 🤝
@PHARRAWAY
4 жыл бұрын
Thanks brother
@JayO1963
2 жыл бұрын
Oh dang , you got SprayWayCustoms commenting your content you doing something right.
@xltranger984 жыл бұрын
I did this on a motorcycle tank it was my first time, it came out ok but I want to do it over
@carlosavalos99374 жыл бұрын
Nice video do you sand the base when spraying Candy's like after you spray a silver base for a candy color would you sand the base
@Automobiliana3 жыл бұрын
Very informative, thumbs up
@PHARRAWAY
3 жыл бұрын
Glad it was helpful!
@theaussie71604 жыл бұрын
👍 nice job mate , i use 1.8 flg5
@peterrivney5522 жыл бұрын
Best to use a siphon feed gun then you can put a couple of marbles in the cup and give it a slight stir at the end of your pass ad it will keep the metal flake suspended in the cup so it flowed out evenly.... you can also use low pressure and a dry metal flake gun or mix it with clear... Looking good ...
@carsmoremore4 жыл бұрын
Keep it smashing my Raza:) god bless
@herbiewolfe14243 жыл бұрын
Great job
@niceguy12874 жыл бұрын
When you were spraying the flakes were you waiting normal time like you would between clear coats? or is less or more wait time between coats?
@MarkSexton8874 жыл бұрын
Good information,thanks for that. question for you.how much flake in the container please. looking forward to seeing the 2nd part of the video.
@redbaron24484 жыл бұрын
So it's ok to put flake in Clear Coat instead of Binder?
@marioflores30434 жыл бұрын
Great job Bro
@PHARRAWAY
4 жыл бұрын
Thanks
@TrueGrittCustoms4 жыл бұрын
Love the color bro
@PHARRAWAY
4 жыл бұрын
Thank You brother
@PnwOnTour4 жыл бұрын
Wonder who makes the grant 7
@StillActiveProductions4 жыл бұрын
Can you apply flake over a primer?
@martyW3473 жыл бұрын
Luv your vids man thank you. I recently had a problem that the clear i sprayed over the flake lifted when i was taping the design??? It came off in a big sheet and the flake stayed there. Could you suggest what i did wrong.... Thank you
@PHARRAWAY
3 жыл бұрын
the only thing that I Can think of is that it was not prep properly
@UndergroundPaintKing4 жыл бұрын
I haven’t done a flake job in a long time for the reason of flakes being everywhere and clean up being a nightmare
@PHARRAWAY
4 жыл бұрын
That is true brother
@MGRDiesel
4 жыл бұрын
Underground Paint King 😂😂😂😂that’s true 👍🏻
@UndergroundPaintKing
4 жыл бұрын
MGR Maquinaria big headache 😂 🤦🏾♂️
@UndergroundPaintKing
3 жыл бұрын
@Cody Young not a bad idea 😂
@trentdawg28324 жыл бұрын
Will .002 micro flake work with a 1.4 nozzle. ..
@cookingwithcash118913 күн бұрын
Great tutorial! I’m spraying my taco trailer with orange flake over orange base to make it look like a bass boat! 🚤
@hillsidesavage14132 жыл бұрын
Thank u for showing step by step I'm a beginner I really needed this advice in could I use a single stage 60 gallon compressor ? they said it has to be a 2 stage compressor
@PHARRAWAY
2 жыл бұрын
You can I was using a single stage compressor for years
@hillsidesavage1413
2 жыл бұрын
We preciate u man much love from my way !
@eklein39043 жыл бұрын
Man, love your work....I have a Manx buggy in Tangerine red original gel, we will repaint in the same but wondering about adding metal flake....how do you choose colour of them? Lighter , darker ? Can it be done in urethane? Thanks....cheers from Australia
@PHARRAWAY
3 жыл бұрын
yes it can be done with urethane paint and about the color it's your choice
@garyhawthorne16784 жыл бұрын
Hello is the grant 7 clear better that the wet wet plus
@DiscoGreen8 ай бұрын
Awesome
@jesuspena5366 Жыл бұрын
How much coats of clear does it take to fully cover the metal flakes so that you can sand clear ?
@VA4344 жыл бұрын
Was taught to drop 2 nuts in the cup to keep shaking/stirring while you spray also.
@PHARRAWAY
4 жыл бұрын
That's on a pressure cup not a gravity cup
@Diamondsintherubble2 жыл бұрын
Hey, can you do a video doing a PEARL over color flakes? I’ve seen videos saying candy with flakes but i’d like to see multiple layers of color in a paint job. I’m hoping 3 coats will still show the flakes underneath?
@PHARRAWAY
2 жыл бұрын
Will do
@danavega16304 жыл бұрын
te quedo mamalon
@josenarvaez53383 жыл бұрын
Is that husky gun the one that comes on a “combo” two guns package?
@PHARRAWAY
3 жыл бұрын
yes it is
@PTucker08643 жыл бұрын
Very cool man! 😎 Wondering....can I flake up a candy paint? Or should the flake be sprayed beneath or over the candy before clear? Thanks.
@PHARRAWAY
3 жыл бұрын
it's best to spray under the candy for more pop
@redbaron24483 жыл бұрын
New Subscriber, Question, when wet sanding some of my Flakes Turn Silver, Why's that's
@PHARRAWAY
3 жыл бұрын
you did not applied enough clear
@TheCthtoNicfLy4 жыл бұрын
I had some old gun from my grandpa now I know ..it had a spinner in it .....long gone dang it
@jeffeaton52214 жыл бұрын
I have sprayed .004 & .008 with a DeVilbiss GPI 1.4 tip without any problems but only used 25g each size. so 50g total per 90oz intercoat.
@PHARRAWAY
4 жыл бұрын
Nice
@mitchellferre1652
4 жыл бұрын
GPI is a great gun. I was wondering what size flake would work with a 1.4 tip. Thanks for the info. I use a 1.8 for larger flake.
@quentinfilbeck65922 жыл бұрын
Cant seem to find a video specific to my paint job. I have some old school square cut .025 white flake. Im told to use 2 different base colors though. Black or white. I want it to come out as white as possible without getting a dingy yellowish brown finish. Any suggestions?
@PHARRAWAY
2 жыл бұрын
You will need a good clear coat brother that's what causing the yellowing
@Tony-hc6nq2 жыл бұрын
Thanks for your channel I’m too a beginner at painting and I’m learning on my own. I’m trying to paint white and Snow White flake but it keeps looking like it has specs or dirty ? Can you do a video on white base with Snow White flakes or reply to my comment? Thanks
@PHARRAWAY
2 жыл бұрын
Sure will just give me some time
@snapfly7 Жыл бұрын
Is there a budget friendly paint brand that is still decent that has candy and metallics?
@javierflores46054 жыл бұрын
Bro question for you Step1 1 I just sanded the 2k primer 2 can I just shoot the silver base Or do I need to seal it or add some kind of adhesive first thanks
@PHARRAWAY
4 жыл бұрын
you can just shoot the silver on to the primer
@kassan394 жыл бұрын
Please tell me the size of the gun and the size of the flakes.
@davidgibson41242 жыл бұрын
Hi can you give me mix ratio for gel coat with flake . Iam wanting to flake my bass boat I have a 3.0 gun for big flake gravity feed . Well I have 2 differnt ones thank you so much for any help . And psi
@PHARRAWAY
2 жыл бұрын
On something like that I do 4oz of flake to 1qt of gel coat
@bobbybrooks5846 Жыл бұрын
How much is everything you used? I want to paint my boat? I also would like to know how many different spray guns did you use and tip sizes
@seonsmith16672 жыл бұрын
Is it possible to use a 1.4 tip to shoot .004 and .008 mix together?
@PHARRAWAY
2 жыл бұрын
No it will clogged up not recommend
@tandysmith12544 жыл бұрын
How come you use clear instead of binder does it make the flake lay down flatter?
@PHARRAWAY
4 жыл бұрын
Yes it does
@marcusjahnke92874 жыл бұрын
Great video! Did you use the fan to blow air and dust out while painting?
@PHARRAWAY
4 жыл бұрын
Yes
@marcusjahnke9287
4 жыл бұрын
Thanks!
@simonwicks36212 жыл бұрын
Where can i find part two? Ive looked but cant find it. Thank you
@PHARRAWAY
2 жыл бұрын
It's in my channel
@paintnomics95234 жыл бұрын
Should i flake the first coat after base and than gloss over again with the second coat with no flake so it seals the flake in?
@PHARRAWAY
4 жыл бұрын
yes
@ericv41523 жыл бұрын
Hey brother i have a question..I HAVE A stock silver painted 1998 town car ..my question is can i use the stock paint as a base and spray flake and candy over that
@PHARRAWAY
3 жыл бұрын
Yes as long as the paint is still good
@stiansberg78693 жыл бұрын
Could you do metal flake without a gun? For small areas? Clear coat and use a sieve and dust it over like powdered sugar on a doughnut, while it's still wet, or is that just stupid?
@PHARRAWAY
3 жыл бұрын
It might work but don't know
@leonardwalters1544 жыл бұрын
Wow, that side has some sparkle, I'll bet there is some jealous bass boats around there
@PHARRAWAY
4 жыл бұрын
lol thanks
@leonardwalters154
4 жыл бұрын
@@PHARRAWAY I always learn something new, and want to do my own paint jobs on my vehicles, and it is completely different from stain and lacquer that I do on trim outs and furniture
@PHARRAWAY
4 жыл бұрын
@@leonardwalters154 Awesome try it brother
@christianalcorn78083 жыл бұрын
What kind of paint did you use about to attempt this with urethane paint
@PHARRAWAY
3 жыл бұрын
the paint was from urekem paint and the candy was from Grant 7 and the clear was also Grant 7 clear
@victoralcantara27673 жыл бұрын
Hola..para aplicar single stage paint ,puedo usar la punta 2.0.gravias
@PHARRAWAY
3 жыл бұрын
no es muy grande y te va a esqurir la pintura 1.3 o 1.4 es mejor
@johnelliott70204 жыл бұрын
Why did you use a Husky spray gun? Does the metal flake wear out the internal parts. I just got some DeVilbiss guns to use with some House of Kolor paints
@PHARRAWAY
4 жыл бұрын
I just don't want to use the good guns for something like that
@reeftheseaforever
4 жыл бұрын
I found that the flake is hard to clean off a gun hence a cheap gun helps
@johnelliott7020
4 жыл бұрын
Thanks guys - just what I needed to know. I will use my less expensive gun for the metal flake. This is good information.
@chorizorangel42722 жыл бұрын
PHARRAWAY can any clear coat be used? Or does it have to be a specific one to work with the metal flake?
@PHARRAWAY
2 жыл бұрын
Any clear can be used
@damiandelapp5490Ай бұрын
Thats cool….
@noetomado18434 жыл бұрын
UNa pregunta el clear lo mixteas con harnes asi normal 2,1 y ya solo le pones el metal ? Yo tire ina perla en polbo i la mistie kon muy poko clear y lodemas con reduser pero la pistola seme tapaba mucho y tube mucho problema para aserlo la berda kede muy desanimado i es mucho mas grueso este metal ke la perla en polbo y lo pudiste tirar sin problemas keme rekomiendad
@PHARRAWAY
4 жыл бұрын
Si nada mas el clear 2,1 y el metal flake
@lawrencepatterson4 жыл бұрын
👍🏾👍🏾brother
@suckerpunch19773 жыл бұрын
Noob here. In the final coats “clear coat” as in finish clear coat, or just a clear blender? Thank you.
@PHARRAWAY
3 жыл бұрын
No it has to be clear coat
@GradexAxGuy4 жыл бұрын
One day I’ll be able to do it with the clear...but for now I just gotta stick with the binder... I’ve tried twice with the clear and ran it both time. 🤦🏾♂️
@PHARRAWAY
4 жыл бұрын
sounds good brother
@sll-tt6bj3 жыл бұрын
Good video, are you spraying the second coat without flash time?
@PHARRAWAY
3 жыл бұрын
no I waited 15min in between
@sll-tt6bj
3 жыл бұрын
Thanks really like the videos
@lisettetrejo4753 жыл бұрын
Can you make a video on how to come up with lowrider designs?
@PHARRAWAY
3 жыл бұрын
I have some brother there in my channel
@robertscott33993 жыл бұрын
you aint kidding bro that stuff is messy as all get out i think i still have a few layers of flakre on my garage floor from a couple years ago lol. butt ive done the dry flake thing made my own flake buster. but it tends to get real chunky on the suface.
@PHARRAWAY
3 жыл бұрын
yup you got that right
@manonfirelj3 жыл бұрын
I like watching your video on spraying metal flake. I'm spraying a flaked blue boat, sanded the surface and started spraying but I used a already mix lacquer from a can. The problem im having is the flake doesn't seam to flow with the lacquer to the surface. it seem to glog up in the spray can . I shake it and it just doesn't flow. I first I used a 1.8 needle . then I bought another air gun with 2.7 made for thick primer or metal flake. Still doesn't spray out like yours, only thing I can think of is the Lacquer Clear is not correct to use with metal flake.. any suggestions ? thanks
@PHARRAWAY
3 жыл бұрын
At what pressure are you running it?
@manonfirelj
3 жыл бұрын
@@PHARRAWAY 27psi
@PHARRAWAY
3 жыл бұрын
@@manonfirelj try 29 or 30 psi brother
@manonfirelj
3 жыл бұрын
@@PHARRAWAY thanks you make it looks so easy. So you don’t think it could be the Lacquer paint huh.
@manonfirelj
3 жыл бұрын
Maybe I should us a gel coat mixed with flakes.
@mathieumartel8373 жыл бұрын
Are you removing the little filter at the base of the cup, or the pass trough it ?
@PHARRAWAY
3 жыл бұрын
Yes I am
@mathieumartel837
3 жыл бұрын
@@PHARRAWAY thanks from Québec, in Canada 😁 your how to videos are a lifesaver !
@jackjacke46544 жыл бұрын
Aren't you spraying a bit close? I hear your supposed to be like a foot away. Also can you mix metal flake in with the paint when you spray it?
@PHARRAWAY
4 жыл бұрын
You can but I will not do it, it takes the sparkle away
@rudy1574 Жыл бұрын
I thought you can only pass over it one coat with the clear coat mixed in with the metal flake ? I have a bass boat that I am getting ready to paint first time painting! .
@JesusFernandez-ds1mx3 жыл бұрын
so you first mix the flakes and hardener first? then clear coat
@PHARRAWAY
3 жыл бұрын
Yes exactly
@treyt67654 ай бұрын
If I was going to shoot the flake on a boat. Would I need to sand in between coats ? Or just burry it with the extra coats of clear ?
@PHARRAWAY
4 ай бұрын
you would need to sand
@streetclasscc51893 жыл бұрын
Can u add that metal flake to any paint or just on clear coat?
@PHARRAWAY
3 жыл бұрын
To any paint
@sdr_autochannel43103 жыл бұрын
I tried this the other day with my 1.8 iwata and clogged my gun in 2 sec . What size flake your shooting ?
@PHARRAWAY
3 жыл бұрын
it was .008
@osvaldogonzalez15333 жыл бұрын
What husky gun model are you using?
@PHARRAWAY
3 жыл бұрын
Gravity Feed HVLP Spray Gun
@elvism23802 жыл бұрын
What silver base coat did you use?
@PHARRAWAY
2 жыл бұрын
From urekem called steller silver
@MAVERICK722264 жыл бұрын
Where are you located? I want my truck metal flaked. I can find a painter with a creative side. I am in california
@slickrickjones2 жыл бұрын
Hey man, I couldn’t find the 2nd video on this one. Did you ever have time to post on sanding this?
@PHARRAWAY
2 жыл бұрын
kzread.info/dash/bejne/X2eqk9Jqoamyk6g.html
@slickrickjones
2 жыл бұрын
@@PHARRAWAY you tha man! Thanks
@slickrickjones
2 жыл бұрын
Hey buddy. Got s few questions. After rewatching both you videos, I just want to make sure I got the right supplies. I sprayed my base Kandy today. Forgive me for the questions, I just want to do it right the first time. 1) When mixing the flake, I use regular clear and not the intercoat clear? 2) You said you mixed the flake clear with hardener. I’ve got the UreChem UC-410 clear and directions say it “must” be mixed with activator. So do I need to buy another clear that mixes with hardener or just buy a hardener for the UC-410? 3) After spraying the flake, did you use four coats of regular and not the intercoat clear? 4) I’ve got regular Candy from UreChem, which mixes 4.1.1. Can I use that instead of the candy you used, or do I have to have the concentrate you used? Thanks man. Sorry for the questions.
@les1ed2 жыл бұрын
are there flakes bigger than .025 for spray guns and if so where are they available
Пікірлер: 256
I already know how to spray, but I must say your technique is what newbies need to learn. Great content.
I gotta say, I’ve been getting really cynical lately, burned by a lot of crap going on in the world. I came to the comments expecting a bunch of racist comments and racist jokes about LatinX people and instead I’m so blown away by how much positivity and warmth there is. So many supportive people just showing appreciation for a guy who’s seriously talented and teaching others. Ya’ll gave me some hope again. Thank you!
@PHARRAWAY
3 жыл бұрын
Anytime brother that is what its all about
@daveyrock6521
3 жыл бұрын
Hell I always thought Mexican/Latino(a), Puerto Rican, or any other Spanish sided ethnicities had the custom touch. Whenever I see a custom paint job, airbrush, metal flake, candy, or metallic, it’s usually always done by them. Brilliant work I see. I’ve noticed over the years that certain races have certain skills, simply that no one else can master.
@alpeterson
3 жыл бұрын
@@daveyrock6521 I mean, I wouldn’t say specific races have talents others don’t, but I’d say certain cultures are known for strong talents in different areas. Mexican and Latino culture has deep roots in low rider communities so I agree with the amount of talented painters coming from there is super high.
Another fantastic video man, thank you so much for sharing your knowledge, I'm learning so much from your content. So excited to start playing with flake,Kandy,masking, airbrushing ect.
I’ve been looking for a video like this for weeks! Thank you!
Keep teaching the people my brother...
That was awesome I noticed you used a lot of flake in that,thanks for the demonstration!👍👍👍. ✌️
Wonderful! This is the best flake spraypaint tutorial on youtube. Thanks a lot bro for the info about te nozzle- and compressor pressure settings. Much appreciated and see you next transparent paint job! 🤝
@PHARRAWAY
4 жыл бұрын
anytime brother
that was Great I have been doing paint and body for over 30 years and i have never tried to do metalflake really didnt know how to do it. thanks for showing this look forwad to the other videos on this, thanks again
@PHARRAWAY
4 жыл бұрын
Anytime brother
So I did it, I sprayed flake. I had a lot of problems with my 2 mm gun clogging and the only thing I could do was pour out the flake back into my mixing cup between coats and spray a little solvent through the gun. Less than idea but it got me through the process. I’ve seen guys toss a couple nuts into the paint cup on their spray gun to get things moving. I used a much larger flake though. I sprayed Candy Shops .015 flake, looks good now with a HOK Kandy Apple Red. It was a serious process though.
Wow 🤩 looks amazing! Got to subscribe cause I am doing my second flake paint job soon and you are showing me things I wasn’t sure of doing!
This is the best flake video I've found. Thanks for the tips!
@PHARRAWAY
Жыл бұрын
Anytime
Yo, thanks so much for the info! This is super helpful and easy to follow. Much appreciated
Great work I’ve gotten better because of you keep it up
@PHARRAWAY
2 жыл бұрын
Nice
That looks so beautiful mixing in the cup 😁👍
Your video was a lot of help. Keep up the good work.
Great video one day I will try spraying flake thank you for the video
nice I'm getting my crown vic ready to flake the roof :) thumbs up
Back many many years ago I sprayed several cycles and helmets with Metalflake! What I used was an good ole Binks #7 spray gun that had a cup that had an air powered magnetic paddle inside the cup that would keep the Metalflake suspended. I still have some of those boxes of Metalflake! Lol! Tom
@PHARRAWAY
4 жыл бұрын
That is one nice gun I have mine in display
@edwarddollbaum5671
3 жыл бұрын
Best spray gun ever in my opinion. Back in the day i painted with that gun ALOT of cars. I sprayed alot of Amer-flint on cars in Florida. The only paint that would last in the sun besides Imron. The 36sk head would spray metal flake nice. Very coarse flake. Heavy gun that a man had to use! I used to have a strong back and a weak mind. Now just have the weak mind. Lol
Your Awesome, my friend. Love learning from your video's!
I'm learning I appreciate it god bless very helpful
@PHARRAWAY
3 жыл бұрын
Thanks
Thanks fir doing this bro, great work!
Excellent video many thanks for sharing
Awesome vid bro thanks for sharing your knowledge!
@PHARRAWAY
3 жыл бұрын
anytime
Love it! Great video
Great job man 🤘
Nice video. Thanks for this! 🍻🙏🤘
Awesome video, thank you for sharing, you got yourself a new subscriber 👍
Good info!!! Thanks
Keep it up Pharraway . I enjoy these vids 🤝
@PHARRAWAY
4 жыл бұрын
Thanks brother
@JayO1963
2 жыл бұрын
Oh dang , you got SprayWayCustoms commenting your content you doing something right.
I did this on a motorcycle tank it was my first time, it came out ok but I want to do it over
Nice video do you sand the base when spraying Candy's like after you spray a silver base for a candy color would you sand the base
Very informative, thumbs up
@PHARRAWAY
3 жыл бұрын
Glad it was helpful!
👍 nice job mate , i use 1.8 flg5
Best to use a siphon feed gun then you can put a couple of marbles in the cup and give it a slight stir at the end of your pass ad it will keep the metal flake suspended in the cup so it flowed out evenly.... you can also use low pressure and a dry metal flake gun or mix it with clear... Looking good ...
Keep it smashing my Raza:) god bless
Great job
When you were spraying the flakes were you waiting normal time like you would between clear coats? or is less or more wait time between coats?
Good information,thanks for that. question for you.how much flake in the container please. looking forward to seeing the 2nd part of the video.
So it's ok to put flake in Clear Coat instead of Binder?
Great job Bro
@PHARRAWAY
4 жыл бұрын
Thanks
Love the color bro
@PHARRAWAY
4 жыл бұрын
Thank You brother
Wonder who makes the grant 7
Can you apply flake over a primer?
Luv your vids man thank you. I recently had a problem that the clear i sprayed over the flake lifted when i was taping the design??? It came off in a big sheet and the flake stayed there. Could you suggest what i did wrong.... Thank you
@PHARRAWAY
3 жыл бұрын
the only thing that I Can think of is that it was not prep properly
I haven’t done a flake job in a long time for the reason of flakes being everywhere and clean up being a nightmare
@PHARRAWAY
4 жыл бұрын
That is true brother
@MGRDiesel
4 жыл бұрын
Underground Paint King 😂😂😂😂that’s true 👍🏻
@UndergroundPaintKing
4 жыл бұрын
MGR Maquinaria big headache 😂 🤦🏾♂️
@UndergroundPaintKing
3 жыл бұрын
@Cody Young not a bad idea 😂
Will .002 micro flake work with a 1.4 nozzle. ..
Great tutorial! I’m spraying my taco trailer with orange flake over orange base to make it look like a bass boat! 🚤
Thank u for showing step by step I'm a beginner I really needed this advice in could I use a single stage 60 gallon compressor ? they said it has to be a 2 stage compressor
@PHARRAWAY
2 жыл бұрын
You can I was using a single stage compressor for years
@hillsidesavage1413
2 жыл бұрын
We preciate u man much love from my way !
Man, love your work....I have a Manx buggy in Tangerine red original gel, we will repaint in the same but wondering about adding metal flake....how do you choose colour of them? Lighter , darker ? Can it be done in urethane? Thanks....cheers from Australia
@PHARRAWAY
3 жыл бұрын
yes it can be done with urethane paint and about the color it's your choice
Hello is the grant 7 clear better that the wet wet plus
Awesome
How much coats of clear does it take to fully cover the metal flakes so that you can sand clear ?
Was taught to drop 2 nuts in the cup to keep shaking/stirring while you spray also.
@PHARRAWAY
4 жыл бұрын
That's on a pressure cup not a gravity cup
Hey, can you do a video doing a PEARL over color flakes? I’ve seen videos saying candy with flakes but i’d like to see multiple layers of color in a paint job. I’m hoping 3 coats will still show the flakes underneath?
@PHARRAWAY
2 жыл бұрын
Will do
te quedo mamalon
Is that husky gun the one that comes on a “combo” two guns package?
@PHARRAWAY
3 жыл бұрын
yes it is
Very cool man! 😎 Wondering....can I flake up a candy paint? Or should the flake be sprayed beneath or over the candy before clear? Thanks.
@PHARRAWAY
3 жыл бұрын
it's best to spray under the candy for more pop
New Subscriber, Question, when wet sanding some of my Flakes Turn Silver, Why's that's
@PHARRAWAY
3 жыл бұрын
you did not applied enough clear
I had some old gun from my grandpa now I know ..it had a spinner in it .....long gone dang it
I have sprayed .004 & .008 with a DeVilbiss GPI 1.4 tip without any problems but only used 25g each size. so 50g total per 90oz intercoat.
@PHARRAWAY
4 жыл бұрын
Nice
@mitchellferre1652
4 жыл бұрын
GPI is a great gun. I was wondering what size flake would work with a 1.4 tip. Thanks for the info. I use a 1.8 for larger flake.
Cant seem to find a video specific to my paint job. I have some old school square cut .025 white flake. Im told to use 2 different base colors though. Black or white. I want it to come out as white as possible without getting a dingy yellowish brown finish. Any suggestions?
@PHARRAWAY
2 жыл бұрын
You will need a good clear coat brother that's what causing the yellowing
Thanks for your channel I’m too a beginner at painting and I’m learning on my own. I’m trying to paint white and Snow White flake but it keeps looking like it has specs or dirty ? Can you do a video on white base with Snow White flakes or reply to my comment? Thanks
@PHARRAWAY
2 жыл бұрын
Sure will just give me some time
Is there a budget friendly paint brand that is still decent that has candy and metallics?
Bro question for you Step1 1 I just sanded the 2k primer 2 can I just shoot the silver base Or do I need to seal it or add some kind of adhesive first thanks
@PHARRAWAY
4 жыл бұрын
you can just shoot the silver on to the primer
Please tell me the size of the gun and the size of the flakes.
Hi can you give me mix ratio for gel coat with flake . Iam wanting to flake my bass boat I have a 3.0 gun for big flake gravity feed . Well I have 2 differnt ones thank you so much for any help . And psi
@PHARRAWAY
2 жыл бұрын
On something like that I do 4oz of flake to 1qt of gel coat
How much is everything you used? I want to paint my boat? I also would like to know how many different spray guns did you use and tip sizes
Is it possible to use a 1.4 tip to shoot .004 and .008 mix together?
@PHARRAWAY
2 жыл бұрын
No it will clogged up not recommend
How come you use clear instead of binder does it make the flake lay down flatter?
@PHARRAWAY
4 жыл бұрын
Yes it does
Great video! Did you use the fan to blow air and dust out while painting?
@PHARRAWAY
4 жыл бұрын
Yes
@marcusjahnke9287
4 жыл бұрын
Thanks!
Where can i find part two? Ive looked but cant find it. Thank you
@PHARRAWAY
2 жыл бұрын
It's in my channel
Should i flake the first coat after base and than gloss over again with the second coat with no flake so it seals the flake in?
@PHARRAWAY
4 жыл бұрын
yes
Hey brother i have a question..I HAVE A stock silver painted 1998 town car ..my question is can i use the stock paint as a base and spray flake and candy over that
@PHARRAWAY
3 жыл бұрын
Yes as long as the paint is still good
Could you do metal flake without a gun? For small areas? Clear coat and use a sieve and dust it over like powdered sugar on a doughnut, while it's still wet, or is that just stupid?
@PHARRAWAY
3 жыл бұрын
It might work but don't know
Wow, that side has some sparkle, I'll bet there is some jealous bass boats around there
@PHARRAWAY
4 жыл бұрын
lol thanks
@leonardwalters154
4 жыл бұрын
@@PHARRAWAY I always learn something new, and want to do my own paint jobs on my vehicles, and it is completely different from stain and lacquer that I do on trim outs and furniture
@PHARRAWAY
4 жыл бұрын
@@leonardwalters154 Awesome try it brother
What kind of paint did you use about to attempt this with urethane paint
@PHARRAWAY
3 жыл бұрын
the paint was from urekem paint and the candy was from Grant 7 and the clear was also Grant 7 clear
Hola..para aplicar single stage paint ,puedo usar la punta 2.0.gravias
@PHARRAWAY
3 жыл бұрын
no es muy grande y te va a esqurir la pintura 1.3 o 1.4 es mejor
Why did you use a Husky spray gun? Does the metal flake wear out the internal parts. I just got some DeVilbiss guns to use with some House of Kolor paints
@PHARRAWAY
4 жыл бұрын
I just don't want to use the good guns for something like that
@reeftheseaforever
4 жыл бұрын
I found that the flake is hard to clean off a gun hence a cheap gun helps
@johnelliott7020
4 жыл бұрын
Thanks guys - just what I needed to know. I will use my less expensive gun for the metal flake. This is good information.
PHARRAWAY can any clear coat be used? Or does it have to be a specific one to work with the metal flake?
@PHARRAWAY
2 жыл бұрын
Any clear can be used
Thats cool….
UNa pregunta el clear lo mixteas con harnes asi normal 2,1 y ya solo le pones el metal ? Yo tire ina perla en polbo i la mistie kon muy poko clear y lodemas con reduser pero la pistola seme tapaba mucho y tube mucho problema para aserlo la berda kede muy desanimado i es mucho mas grueso este metal ke la perla en polbo y lo pudiste tirar sin problemas keme rekomiendad
@PHARRAWAY
4 жыл бұрын
Si nada mas el clear 2,1 y el metal flake
👍🏾👍🏾brother
Noob here. In the final coats “clear coat” as in finish clear coat, or just a clear blender? Thank you.
@PHARRAWAY
3 жыл бұрын
No it has to be clear coat
One day I’ll be able to do it with the clear...but for now I just gotta stick with the binder... I’ve tried twice with the clear and ran it both time. 🤦🏾♂️
@PHARRAWAY
4 жыл бұрын
sounds good brother
Good video, are you spraying the second coat without flash time?
@PHARRAWAY
3 жыл бұрын
no I waited 15min in between
@sll-tt6bj
3 жыл бұрын
Thanks really like the videos
Can you make a video on how to come up with lowrider designs?
@PHARRAWAY
3 жыл бұрын
I have some brother there in my channel
you aint kidding bro that stuff is messy as all get out i think i still have a few layers of flakre on my garage floor from a couple years ago lol. butt ive done the dry flake thing made my own flake buster. but it tends to get real chunky on the suface.
@PHARRAWAY
3 жыл бұрын
yup you got that right
I like watching your video on spraying metal flake. I'm spraying a flaked blue boat, sanded the surface and started spraying but I used a already mix lacquer from a can. The problem im having is the flake doesn't seam to flow with the lacquer to the surface. it seem to glog up in the spray can . I shake it and it just doesn't flow. I first I used a 1.8 needle . then I bought another air gun with 2.7 made for thick primer or metal flake. Still doesn't spray out like yours, only thing I can think of is the Lacquer Clear is not correct to use with metal flake.. any suggestions ? thanks
@PHARRAWAY
3 жыл бұрын
At what pressure are you running it?
@manonfirelj
3 жыл бұрын
@@PHARRAWAY 27psi
@PHARRAWAY
3 жыл бұрын
@@manonfirelj try 29 or 30 psi brother
@manonfirelj
3 жыл бұрын
@@PHARRAWAY thanks you make it looks so easy. So you don’t think it could be the Lacquer paint huh.
@manonfirelj
3 жыл бұрын
Maybe I should us a gel coat mixed with flakes.
Are you removing the little filter at the base of the cup, or the pass trough it ?
@PHARRAWAY
3 жыл бұрын
Yes I am
@mathieumartel837
3 жыл бұрын
@@PHARRAWAY thanks from Québec, in Canada 😁 your how to videos are a lifesaver !
Aren't you spraying a bit close? I hear your supposed to be like a foot away. Also can you mix metal flake in with the paint when you spray it?
@PHARRAWAY
4 жыл бұрын
You can but I will not do it, it takes the sparkle away
I thought you can only pass over it one coat with the clear coat mixed in with the metal flake ? I have a bass boat that I am getting ready to paint first time painting! .
so you first mix the flakes and hardener first? then clear coat
@PHARRAWAY
3 жыл бұрын
Yes exactly
If I was going to shoot the flake on a boat. Would I need to sand in between coats ? Or just burry it with the extra coats of clear ?
@PHARRAWAY
4 ай бұрын
you would need to sand
Can u add that metal flake to any paint or just on clear coat?
@PHARRAWAY
3 жыл бұрын
To any paint
I tried this the other day with my 1.8 iwata and clogged my gun in 2 sec . What size flake your shooting ?
@PHARRAWAY
3 жыл бұрын
it was .008
What husky gun model are you using?
@PHARRAWAY
3 жыл бұрын
Gravity Feed HVLP Spray Gun
What silver base coat did you use?
@PHARRAWAY
2 жыл бұрын
From urekem called steller silver
Where are you located? I want my truck metal flaked. I can find a painter with a creative side. I am in california
Hey man, I couldn’t find the 2nd video on this one. Did you ever have time to post on sanding this?
@PHARRAWAY
2 жыл бұрын
kzread.info/dash/bejne/X2eqk9Jqoamyk6g.html
@slickrickjones
2 жыл бұрын
@@PHARRAWAY you tha man! Thanks
@slickrickjones
2 жыл бұрын
Hey buddy. Got s few questions. After rewatching both you videos, I just want to make sure I got the right supplies. I sprayed my base Kandy today. Forgive me for the questions, I just want to do it right the first time. 1) When mixing the flake, I use regular clear and not the intercoat clear? 2) You said you mixed the flake clear with hardener. I’ve got the UreChem UC-410 clear and directions say it “must” be mixed with activator. So do I need to buy another clear that mixes with hardener or just buy a hardener for the UC-410? 3) After spraying the flake, did you use four coats of regular and not the intercoat clear? 4) I’ve got regular Candy from UreChem, which mixes 4.1.1. Can I use that instead of the candy you used, or do I have to have the concentrate you used? Thanks man. Sorry for the questions.
are there flakes bigger than .025 for spray guns and if so where are they available
@PHARRAWAY
2 жыл бұрын
Yes you can get them on didspade website
@les1ed
2 жыл бұрын
awesome