How To Shorten Tiny Screws
Тәжірибелік нұсқаулар және стиль
How To Shorten Tiny Screws. In this how to make folding knives video, Gillian covers an essential and often time consuming process.
▬▬▬▬▬▬▬ VIDEO ▬▬▬▬▬▬▬
How To Shorten Tiny Screws video. In this short how to make folding knives video, knife maker Gillian covers an essential and often time consuming process of shortening screws. The knife maker shows how to count threads per inch for a #2 - 56 screw. Also a diy homemade titanium tooling plate / screw shortening tool is shown and used. The screw shortening tool has .093 pass-thru for #2-56 screw, and also holes tapped using a tapmatic to hold small parts for bead blasting or anodization. The screw length is determined by counting threads, and then grinding the screw down using a bench grinder, before a second grinding using a buffer and a scotchbrite wheel. Learning how to shorten tiny screws is an essential part of making folding knives.
▬▬▬▬▬▬▬ PLAYLISTS ▬▬▬▬▬▬▬
Learn how to make knives playlist
• The Fallen Star Knife ...
Learn how to read Mic
• "get Precise Measureme...
Gillian Knives are 100% Made in the USA
100% Made in the USA
Contact by Email: Christopher@GillianKnives.com
▬▬▬▬▬▬▬ WEBSITE ▬▬▬▬▬▬▬
WWW.GILLIANKNIVES.COM
Free Shipping on U.S. $99+ orders!
▬▬▬▬▬▬▬ FOLLOW ME ON SOCIAL MEDIA ▬▬▬▬
INSTAGRAM: / christopher.gillian
FACEBOOK: / gillianknives
▬▬▬▬▬▬▬ SUBSCRIBE ▬▬▬▬▬▬▬
Thank you for watching this video-Please Share it. I like to read comments so please leave a comment and…
► Subscribe to My KZread Channel: / @gillianknives
▬▬▬▬▬▬▬ Drill / Tap Knife Making Poster ▬▬▬▬▬▬▬
gillianknives.com/gillians-dr...
By a Maker, for a Maker.
This is the chart that I use daily in my own shop, as a reference while I'm making knives.
This poster has a partly glossy, partly matte finish and it'll add a touch of sophistication to any shop wall.
•Drill & Tap Charts (Imperial and Metric)
•Drill Bit Size Chart (Decimal and Metric Equivalents)
•Knife Making Detent Ball Assistance.
•Knife Making Caged Bearings & Counterbore Pocket Reference.
• Useful Poster for Making Folding Knives.
▬▬▬▬▬▬▬ Online Educational Knife Making Video ▬▬▬▬▬▬▬
gillianknives.com/educational...
Two hours and twelve minutes educational online knife making video. Gillian Builds a Liner-lock from Start to Finish. By the end of this course, you’ll be equipped to understand how to make a liner lock, the required supplies, what tools you will need, and of course, learn the step-by-step process of the craft.
▬▬▬▬▬▬▬ Salt and Pepper Caged Ceramic Bearings ▬▬▬▬▬▬▬
gillianknives.com/caged-beari...
▬▬▬▬▬▬▬ BUSINESS INQUIRY ▬▬▬▬▬▬▬
Contact by Email: Christopher@GillianKnives.com
▬ ABOUT ▬
Christopher is an American Knife Maker. Producing quality knives from a one-man shop, traveling to the knife shows when time allows.
Made in USA knives.
Пікірлер: 8
GREAT INFO THANKS BRO
@GillianKnives
5 жыл бұрын
10 - 4 Matt, thanks for feedback
Why not make your plate the thickness of how long you want your screw, then you can just screw the screw all the way in and grind off what is sticking thru.
@GillianKnives
5 жыл бұрын
You have the right idea Roy. You can further speed up the process by using a pass-thru hole so you don’t have to screw anything into the tooling plate.
1:45 would material influence this? 86 thou screw, could you use thinner material if it’s hardened, or thicker on softer materials like titanium? This is such a great technique. Super elegant solution. Especially with the counting the revolutions to determine depth. This could in theory be used to make an angle adjust grinding jig. To the drawing board!
They are bolts, not bloody screws, screws are self tapping, bolts have nuts. If you put the nut on the BOLT first, then cut it, you don need to do anything else.
@TheMadMagician87
2 жыл бұрын
No, they're machine screws, look them up; it's you against the world.
@lindboknifeandtool
Жыл бұрын
Where’s the bolt then? It’s a machine screw. Kind of like how “drill bits” are actually just called drills.