HOW TO: Sheathing Servo Wires!!
Ойындар
HD Team Pilot, Girard Ibanez, takes time out to show how he sheaths his servo wires. A very efficient yet economical way to protect servo wires from chaffing against sharp edges. Cool tip applied, CHECK!! Thank you, Girard!
Visit HeliDirect.com for all your RC Heli needs!!
Пікірлер: 24
Shrink tubing stretcher - LOL Those are E or C clip pliers for removing C clips .. however yeah OK - “Heat Shrink Stretchers” 😂
@heeder777
4 ай бұрын
Actually, they are 90-degree needle nose pliers. C/E clip pliers have tiny noses that can fit in the holes of the clip.
@IFLYRCHELICOPTERS
4 ай бұрын
My inside joke … I also have a wire stretcher tool 😂😂😂
Great tip on the paracord. There are wire covers that will stretch open without disconnecting the wires as well. Still a great new way to cover wires however. Thanks!
@IFLYRCHELICOPTERS
4 ай бұрын
Yes there are also the Chinese hand cuff plastic braid sleeve. I’ve been using that before but now favoring this cloth sheathing. With the braided sheath I use a soldering iron to burn the ends from unraveling after I install the braided sheath on the wire.
Great idea using the paracord. I’ve used the sheathing designed for it and I hate how the ends can never be clean. Can’t wait to try this. Thanks for sharing. Not bad at all for a “one armed guy”!!!! LOL Hope your recovery is coming along well
@IFLYRCHELICOPTERS
4 ай бұрын
Thanks Doug, credit goes to SRCHA pilots aka Dude. Anything an arm stretch away is a challenge one handed.
Why the vertical video letterboxed as a horizontal video, can't watch it in full screen.
@IFLYRCHELICOPTERS
4 ай бұрын
Sorry about that …
I find that the tip of a #11 X-Acto blade works really well to lift the tabs on the servo plug plus it has a handle. Never tried a single razor blade, just passing along what I've found that works really well in addition to your method. I do use the butane heat gun on all my heat shrink tubing great tool..
@IFLYRCHELICOPTERS
4 ай бұрын
Thanks for that tip … the butane heat gun with a focus nozzle is a great tool … I need to get another set as mine is from 1993 era
@heeder777
4 ай бұрын
@@IFLYRCHELICOPTERS Mine is an older one also, it’s bernzomatic pencil torch. It has attachments so you can use it as a torch, a soldering iron and a heat gun. Handy thing to have not only on the bench but at the field. I even had a guy ask me to use it to light his cigarette. 🤣
@IFLYRCHELICOPTERS
4 ай бұрын
@@heeder777yes they are handy field tool … I bought mine in 1993 as I needed a field soldering iron.
what mm size cord are you using?
Will there be a st. Patrick's day sale?
The heak . Just use snake skin wrap . Paracord on a 4k heli doesn't seem right LOL
@IFLYRCHELICOPTERS
4 ай бұрын
Give it a try, any sheathing is better than no sheathing regardless of the cost of the model.
Hello where did you find the black fiber sheath and what diameter is it?
@heeder777
4 ай бұрын
It's the outer shell from paracord. He just removed the strands from the inside.
@axelminet1095
4 ай бұрын
@@heeder777 what diameter of paracord?
@heeder777
4 ай бұрын
@@axelminet1095 4 mm 5/32 or 550 rated. All the same. The 550 is 4mm, just shy of 5/32”
@IFLYRCHELICOPTERS
4 ай бұрын
Hyper Tough 550 Paracord (Walmart), 5/32-inch 50 feet
@axelminet1095
4 ай бұрын
@@IFLYRCHELICOPTERS thk