Nobody else is including this critical step in spraying a car. Thanks for this!

@UndergroundPaintKing

8 ай бұрын

You’re welcome and I’m glad the video was helpful!

The people's champ does it again! Thanks for all the great videos. Unlike all the other channels that say "best small compressor at home spray guns", then run them off pro 60 gallon tanks you actually show how to run on a small tank. Top notch

@UndergroundPaintKing

2 жыл бұрын

I do my best to help my people out Fisch…I appreciate you checking out the video!

@2koolforyou88

2 жыл бұрын

Very tru I paint with a hf 29 gallon compressor haven't sprayed a entire car yet but it can handle what I use it for even with some expensive guns I have

@mohammedsabeel50

5 ай бұрын

​@UndergroundPaintKing hi my bro, would i be able to use a lvlp gun on a hyundai 50litre oil free compressor, 11cfm 2.5hp

@torydz

20 күн бұрын

I've restored three cars already with a 6 gallon pancake compressor. I spray the traditional acrylic lacquer for restoration purposes. I do one panel at a time. The entire paint job on any given car takes about seven days, as I spray it in sections. I know, the words "acrylic lacquer" is practically a swear word to today's painters, and painters who still use it are practically considered alien life forms. With acrylic lacquer, you can literally stop in the middle of a panel and continue painting the next day if you want. You have to cut-and-buff after you're finished, but I consider that "my therapy" :)

My wife just bought me a 26 gallon, and I bought a LPLV gun. I have new filters also, I sincerely appreciate these vids man.

@UndergroundPaintKing

Ай бұрын

Awesome ❗️ and I appreciate you watching the videos and I hope they continue to be helpful 💯

Bro!!!! I didn't even consider the effect of this 100' hose. You sir are my hero today.

@UndergroundPaintKing

12 күн бұрын

@@brianhankerson9169 glad the video was helpful Brian💯

Thank you. This was what people don't understabd when they start painting.. What goes along with that is "while painting, don't let up on the trigger as you turn back for the next stroke." In your video when you let up on the trigger and the pressure goes up to like 60, the split second you pull the trigger, you will for a split second, get 60 psi at the nozzle instead of the 30 . You can hear this in your video. Each time you pull the triggeer, you can hear a RUSH of air. To correct this, when painting never let all the way off the trigger. Just relax the trigger at the end of a run, but keep the AIR flowing through the gun with out siphoning any paint.

@UndergroundPaintKing

Жыл бұрын

Thanks Tom I appreciate you checking out the video and leaving a great tip💯💪🏾

First time painter, been watching your videos and purchasing products per your suggestions. Now its time to get to work... Excellent content for a novice to learn...keep em coming...thanks for the info

@UndergroundPaintKing

2 жыл бұрын

You’re welcome Fam and I hope the channel continues to help!

@williamharris631

3 ай бұрын

I have the same compressor do I set it up the same way I have a A 610 spray gun love all your videos

And this is why you are THE PEOPLES CHAMP!!!! …. All new painters should definitely sub to this channel

@UndergroundPaintKing

2 жыл бұрын

I appreciate you Grant and I’m doing my best to help out the new painters in the game…thanks again bro!

UPK, I appreciate the jewels you feeding the people. I am working with the same compressor and I was clueless about the set up; until I saw this video. Thank you! #1965Chevelle

@UndergroundPaintKing

Жыл бұрын

You’re welcome and I’m glad I could help Craig!

Out of all the channels I’ve checked out, you most definitely give the best advice. Keep them vids coming.

@UndergroundPaintKing

2 жыл бұрын

Thanks Enrique I appreciate that and appreciate you checking out the channel and I hope it continues to help!

Comment Dropped 👑 from Grand Rapids Michigan. Thank you for all you do for us DIY garage painters. After watching videos for 2 years, I finally pulled the trigger (no pun intended) and painted two cars this year. Learned a lot. They both look awesome from 5 ft away. Success! Thanks again man. Best wishes to you.

@UndergroundPaintKing

8 ай бұрын

Awesome to hear you pulled the trigger and did 2 projects 🙌🏾 I’m glad I could help in anyway possible and hope the channel continues to help out 💯💪🏾

Finally someone who could answer the question for me. Thank you so much!!!!!!!!!!!

@UndergroundPaintKing

3 ай бұрын

You’re welcome, I’m glad the video helped!

Hello UPK, you are the best! You've solved a question that I've been searching for months in KZread videos. Sending a big hug from Ecuador 🇪🇨

@UndergroundPaintKing

6 ай бұрын

I’m glad I could help with the video and I appreciate you checking it out 🙏🏽

Great info UPK. This will definitely help me with losing pressure, I have a small Craftsman 30 gal 5 hp that works well but these tips will up my game. The Peoples Champ at it again with awesome tips. Thanks UPK

@UndergroundPaintKing

2 жыл бұрын

You’re welcome Frank I appreciate you and I’m glad the info is useful to you!

I always wanted to paint a car I just bought a 20gal compressor now I gotta get everything else your videos are very helpful just got yourself a new subscriber.

@UndergroundPaintKing

Жыл бұрын

Thank you Muffintop, I appreciate you subscribing to the channel and I hope it continues to be helpful!

Most excellent lesson! That is something beginners like myself might never have considered. Thank you for the great and informative video.

@UndergroundPaintKing

2 жыл бұрын

You’re welcome Blue2824 I’m glad the information is helpful to you and I appreciate you checking the video out!

Appreciate the info bro! I have a similar setup, with your thorough description of using a small compressor we can know get consistent air pressure and turn out some quality work.

@UndergroundPaintKing

2 жыл бұрын

Yes sir William im glad the info helps!

This is pretty much exactly how I have mines setup , for consistent air flow. Dropping pressure is a big problem with smaller compressors with those bigger guns I use and this setup like this has helped dramatically. Good video brother

@UndergroundPaintKing

2 жыл бұрын

Thanks Bro I appreciate that and keep dropping that content!

Thank you, sir. I am not painting car but this info will help me setup the spray gun for staining/painting a deck and shed. A universal setup.

@UndergroundPaintKing

Жыл бұрын

You’re welcome David, I’m glad the video was helpful and I appreciate you checking it out!

Upking nice talk about air pressure well explained and simply explain especially when you spoke about loosing air if you got a long hose thank you upking

@UndergroundPaintKing

2 жыл бұрын

You’re welcome Husky I’m glad the video was helpful!

Man I'm very impressed by the skills of you teaching how to set up a compressor and paint gun I paint car's as well I just bought a new compressor 21 gallon and was about to be setting it up and your video came up and now it's set up for painting my car's thanks your truly the UPK

@UndergroundPaintKing

2 жыл бұрын

You’re welcome bro I’m glad the video was helpful and I appreciate you checking it out!

Second time through the video it’s alittle more understandable. Thanks for the teaching. You have come a long way since you began making videos.

@UndergroundPaintKing

Жыл бұрын

Thanks Robert, I appreciate you watching the videos and I hope they continue to help and it has been a journey for me to get to this point!

Thank you. You are better than most at giving instructions.

@UndergroundPaintKing

Жыл бұрын

Thanks Augie I appreciate that, I do my best to make things easy for everyone!

I have that same one and it does the job... Had it for 5 years now and has made me alot of money... Just have to go a bit slower so the air stays build up ... And yes drain the tank .. I hooked up 2 outside dryers for mine and love it

@UndergroundPaintKing

2 жыл бұрын

It’s always good to hear a success story…I appreciate you checking out the video!

Came across your channel a while back, great simple explanations. Appreciate the content! Picked up the A610 after your review! Cheers

@UndergroundPaintKing

8 ай бұрын

I’m glad you came across the channel and it was helpful to you🙏🏽💯

Thankyou!! I love the way you explain everything in detail 🙏💯

@UndergroundPaintKing

Жыл бұрын

You’re welcome Ervin💯 I’m glad the video was helpful!

you explain things simply brilliantly!!! Of course the longer your air hose, you'll need slightly more air pressure coming out of the compressor. Also it prevents the compressor running all the time and some water separators have pressure limits. Also ensuring you have no air leaks between the compressor and the gun helps. Top job good sir!! Hello from Newcastle, Australia!!

@UndergroundPaintKing

Жыл бұрын

Thanks Mick for checking out the video and leaving some great info, I appreciate you watching all the way in Australia 🙏🏽

Thank you for producing a video using the materials in realistic "DIY" budget and showing us how its done like a "UPK Pro". - Paint the world!!

@UndergroundPaintKing

6 ай бұрын

Glad I could help and I appreciate you checking out the videos 🙏🏽💯

Great info, UPK! I'm getting ready to paint my truck once the weather warms up and this video is a huge help. Thanks man!

@UndergroundPaintKing

2 жыл бұрын

You’re welcome duderudy I hope the channel continues to help as you do your own project!

good video. I work full time in a shop so I'm used to having plenty of air flow. I wish I woulda had this video when I first started messin around with painting at home. I got the 20 gal kobalt from lowes

@UndergroundPaintKing

2 жыл бұрын

Good to hear you’re in a shop and this info is definitely good for people just starting out like how you and me did…I appreciate you checking out the video Stax!

Thanks for the info bro. Great video keeper coming. After learning and watching you I feel like I can spray everything.

@UndergroundPaintKing

Жыл бұрын

You’re welcome and you can spray it all💯💪🏾

You are a great teacher. Thank you much. ❤

@UndergroundPaintKing

10 ай бұрын

Thanks Robert, I appreciate that 🙏🏽💯

UPK is the best diy channel for painting on all youtube, the best!

@UndergroundPaintKing

7 ай бұрын

Thank you Linda, I really appreciate that 🙏🏽💯

thanks so much your video give me a lot of idea today I've been making a lot of mistakes how to adjust my pressure and when I see your video it help me a lot I've been watching a lot of video on KZread I could not find anyone like you appreciate you thank you so much I have 33 gallons every time I paint it drops, I we really need some of your help for adjusting my compressor thank you

@UndergroundPaintKing

Жыл бұрын

You’re welcome and I’m glad the video helped!

Sending thanks for being a real one and giving me a real video understanding basics

@UndergroundPaintKing

2 жыл бұрын

You’re welcome Novacain82 I hope the info helps you!

Hello again just surfing the paint shop channels and came across yours and very helpful it is to ... I have a classic car to paint next month and I'm looking for all the info I can find and setting up the compressor has helped me out a lot especialy the pressure gauage near the gun never could find out what it did,. now I know,.. I have subscribed so I'll be watching with interest for more tips and hints,... Thank you..... When you paint the world will you be heading down here to Australia,,

@UndergroundPaintKing

4 ай бұрын

I’d love to do some paint work in Australia and hope to do so in the future 🙏🏽💯 I greatly appreciate you subscribing to the channel!

I gotta be honest dude ..I'm about to attempt a paint job on a project car of mine and everyone thinks I'm crazy having never painted before ..BUT ..I've searched and watched damn near every video out there including yours ...YOU have inspired me to feel like I CAN do this ..I've learned more from your videos then most others and I thank you ! I'm attempting a little bit of a tough one a base coat with different color stripes over the car ..but I've got a good lvlp gun ..I've practiced and dialed it in ..A simple garage setup with 20 gallon tank ..I'm confident I can do this ..Thank you again for all your info ..I'm just waiting on warmer weather .

@UndergroundPaintKing

5 ай бұрын

That’s what I like to hear 💯 you’re gonna kill it and I’m glad I could help in anyway possible 💪🏾

@foxtrot68

5 ай бұрын

@UndergroundPaintKing hey man thanks for the response!! Yea I'm kinda excited ..I'm doin a 1978 Mustang cobra ll

@jesusmunoz2439

5 ай бұрын

This is literally me everyone thinks I’m crazy hahaha. What’s crazier is paying $8,000 for a paint job when we got underground paint 👍🏽. Thank you sir I’ve watched all your videos I think I’m ready to start painting my first car.

@UndergroundPaintKing

4 ай бұрын

@@jesusmunoz2439 you’re welcome and I’m glad I could help in any way 💯 good luck to you on your project 💪🏾

Thank you this video is very helpful. I like the way you take ur time to explain well in detail and the recap going over again not too many people do that, I appreciate you and I give u thumps up and I subscribed.

@UndergroundPaintKing

10 ай бұрын

Thanks for subscribing Israel, I appreciate you and I’m glad the video was helpful!

Thanks for your explanation on the hose. I never thought of it.

@UndergroundPaintKing

2 ай бұрын

You’re welcome and I’m glad the video was helpful 💯

Thanks Bro! Wicked knowledge ! The details and demo! Bless!

@UndergroundPaintKing

2 жыл бұрын

You’re welcome Kenchihimura I hope the video helps!

Great vids...easy to understand and straight to the point...good job bros.

@UndergroundPaintKing

Жыл бұрын

Thanks Greg I appreciate you checking out the videos and I’m glad they’re helpful!

Man great information! Thanks a lot! I have the same compressor and I was worry about it, because I want to paint my truck Toyota tacoma and I wasn’t sure, to use my air compressor to do it was a good idea! Now I know I can do it, Thanks again bro!

@UndergroundPaintKing

Жыл бұрын

You’re welcome CHeCKO I’m glad the video was helpful!

@checko78na

Жыл бұрын

@@UndergroundPaintKing now I’m watching you video how you set it up your spray gun! Good information bro! Thanks 👍

@UndergroundPaintKing

Жыл бұрын

@@checko78na you’re welcome!

Thanks for the info I am a novice when it comes to compressors and its set up, this was helpful.

@UndergroundPaintKing

3 ай бұрын

You’re welcome and I’m glad the video was helpful!

Great explanation. Simple and to the point. 🙏

@UndergroundPaintKing

7 ай бұрын

I’m glad the video was helpful and I appreciate you checking it out 🙏🏽💯

Thank you, I appreciate your video and your clear explanations

@UndergroundPaintKing

2 жыл бұрын

You’re welcome Bill I appreciate you checking out the video and I hope it helped!

Thanks I'm a welder I usually paint my railings and gates that I make thanks for the information I've struggling with getting it done right thank you so much

@UndergroundPaintKing

11 ай бұрын

You’re welcome Hubert, I’m glad the video was helpful!

Loving ur videos man , very very helpful. I can't wait to learn to paint..then once I learn to weld , I will be able to do everything ! I'm gonna check n watch videos next on howto mix paint and clear coats

@UndergroundPaintKing

Жыл бұрын

I appreciate you watching the videos and I hope they help!

Thanks a lot bro! This helped me understand how to set my compressor & sprayer up efficiently! I Preciate ya fam! 💯💯✊🏾

@UndergroundPaintKing

3 ай бұрын

You’re welcome and I’m glad the video was helpful to you 💯

Good stuff King...keep em coming!! 👊🏼🍻

@UndergroundPaintKing

2 жыл бұрын

Will do Johnny Cashh💯 I’ll definitely keep the content coming!

Keep doing what you doing I'm trying to get like you the peoples champ and start my own business I'm learning a lot from your work

@UndergroundPaintKing

Жыл бұрын

Appreciate you Andrew and I hope nothing but success to you and your business!

Thanks so much for sharing your knowledge and experience, keep doing you bro

@UndergroundPaintKing

2 жыл бұрын

Thanks for checking out the videos Michael I appreciate that and I hope the channel helps!

Thank you. So much I really loved this video you helped me out so much with this info Thank You again!

@UndergroundPaintKing

Жыл бұрын

You’re welcome Lance, I’m glad the video was helpful and I appreciate you checking it out!

That was a really informative video upk on setting up the spray guns. Keep up the videos.

@UndergroundPaintKing

2 жыл бұрын

Thanks James I appreciate you checking out the video…have a good week my friend!

Watching from barbados and it really helps me

@UndergroundPaintKing

Жыл бұрын

I appreciate you checking out the channel Nigel and hope it continues to help!

Good lookin bruh! Just bought a 26 gal compressor and Spray Gun and needed these tips. Subbed.

@UndergroundPaintKing

2 жыл бұрын

Nice!…glad the video helped Paa and I appreciate you subscribing to the channel!

Great video thanks for all the knowledge you give us bro

@UndergroundPaintKing

2 жыл бұрын

Thanks Corey I appreciate that and appreciate you checking out the videos and I hope they are helpful!

Excellent demo UPK 👍🏿💯

@UndergroundPaintKing

2 жыл бұрын

I appreciate you checking out the video Jonathan 💯

Really this channel is the best and UPK is the correct name. Stay up keep up the good work

@UndergroundPaintKing

2 жыл бұрын

Appreciate you dat dude They HATE…I’m definitely gonna keep the content coming 💯

@datdudetheyhate4121

2 жыл бұрын

@@UndergroundPaintKing I’ll be here watching as I get ready to paint mine soon

@UndergroundPaintKing

2 жыл бұрын

@@datdudetheyhate4121 ok bro and good luck on your project!

I didn't guess about that air horse volume. Thanks for sharing! 👍

@UndergroundPaintKing

Жыл бұрын

You’re welcome and I’m glad I could help!

Great video and explanation. I haddnt thought about that before.

@UndergroundPaintKing

Жыл бұрын

Thanks I appreciate you checking out the video and I’m glad it was helpful!

Great video man. You actually been in the trenches with the small compressor action. I've been painting cars for 25 years and half of this stuff I didn't even know so I'm learning as well. Especially before I go purchasing these LVLP guns. You really are the originator / Godfather of the small compressor, DIY ,LVLP in the KZread space. Good work brother 👊🏼💯 salute champ 🏆

@UndergroundPaintKing

Жыл бұрын

It’s all about us all learning and growing together Triggerman 💯 I just do my best to help out where I can 💪🏾

@thetriggerman954

Жыл бұрын

@@UndergroundPaintKing 👊🏼

GAHHHHHH I’ve been looking for this video forever. Thanks.

@UndergroundPaintKing

2 жыл бұрын

You’re welcome I hope it helps and I appreciate you checking it out

I’ll be using this method fasho!!!🏆🏆🏆🏆

@UndergroundPaintKing

2 ай бұрын

Glad the video was helpful FloridaMade 💯

Sir, thank you for very important information - very helpful for a DIYer

@UndergroundPaintKing

27 күн бұрын

You’re welcome and I’m glad the video was helpful 🙏🏽💯

Thank you UPK! Great video!

@UndergroundPaintKing

2 жыл бұрын

Thanks Donald I appreciate you checking out the video and I hope it helps!

Great video, thanks for showing this.

@UndergroundPaintKing

8 ай бұрын

You’re welcome Don, I’m glad the video was helpful!

your the man. i just got one regulator and thought i would be fine.... guess im goin back to the store!

@UndergroundPaintKing

7 ай бұрын

Thanks Basard, I appreciate that 🙏🏽💯

I just ordered a 30 gallon

Thanks Man excellent advice.

@UndergroundPaintKing

Жыл бұрын

You’re welcome Brian I appreciate you checking out the video and I’m glad it was helpful!

Man this video help me out a lot bruh I appreciate you.

@UndergroundPaintKing

3 ай бұрын

I’m glad the video was helpful Jerry 💯💪🏾

Awesome 👌 Great video Thank you so much for sharing the k n knowledge 🙏

@UndergroundPaintKing

Жыл бұрын

Thanks Dr A, I appreciate you and I’m glad the information is helpful!

Great video! This helped 😊

@UndergroundPaintKing

8 ай бұрын

I’m glad the video was helpful Natalie🙏🏽💯

thanks for sharing that the great video, and yeah it helped loads.

@UndergroundPaintKing

8 ай бұрын

You’re welcome Jim, I’m glad the video was helpful!

excellent video, very helpful thanks

@UndergroundPaintKing

Жыл бұрын

You’re welcome and I’m glad the video helps!

Thanks King, this is gonna help me a lot!

@UndergroundPaintKing

Жыл бұрын

You’re welcome and I’m glad I could help!

You know your business well and I want to THANK YOU for Being such a Good teacher as this tutorial is The Best I've seen and Now I finally understand 😊🙏❣️👍👍

@UndergroundPaintKing

2 жыл бұрын

You’re welcome Debra and I’m glad I could help out and appreciate you checking out the video 👍🏾

Fantastic, I hope this may help with some of the issues I am having. I picked up the AeroPro r500 (on your recommendation, super happy with it) and am using a 21 gallon compressor. I had the knob on the air compressor maxed out and what would happen is when I pulled the trigger on the gun and set my pressure on the regulator it would be fine for awhile, but then the pressure would drop and I'd have to set the regulator again. I am hoping that by setting the compressor to just 20 or 30 pounds above what I want to paint at that it would give me more consistency. I just assumed the regulator would, you know, regulate it no matter what, but maybe I'm asking too much from it? Thank you for making these videos, awesome that you are willing to share your knowledge. :)

@UndergroundPaintKing

10 ай бұрын

I’m glad the video was helpful and I hope that works for you!

Thanks again for a great video!

@UndergroundPaintKing

2 жыл бұрын

You’re welcome Chuck I appreciate you checking out the video and I hope it helps!

Great video for setting up compressor for spraying.

@UndergroundPaintKing

4 ай бұрын

Thanks Ant, I appreciate you checking out the video and I I’m glad it was helpful!

@AntWells

4 ай бұрын

@@UndergroundPaintKing I'm gonna do my 96' Ford ranger next with that set up. Just rolled a truck in rust oleum satín black with decent results.

@UndergroundPaintKing

4 ай бұрын

@@AntWells nice 💯

Thank you! This was the video I was asking for and you delivered. I appreciate you showing the people! Can this be done with a compressor with only one gauge? My small hotdog compressor only has one gauge on it.

@UndergroundPaintKing

2 жыл бұрын

You’re welcome Shiro I hope the info was helpful and you should be able to do the same with one gauge on your compressor

Appreciate your work man. Taking on paint and body for me is like pulling teeth with a butter knife. Lol. Thanks for the breakdown! Great video.

@UndergroundPaintKing

2 жыл бұрын

😂😂😂 walk away from the butter knife…I appreciate you Smitty for checking out the video!

thanks for this video im just starting to paint it help me out today

@UndergroundPaintKing

9 ай бұрын

You’re welcome, I’m glad the video was helpful!

Another great video!!! Dude im glad i found ur channel. Can u do a video or link maybe uve done it before to setting up ur paint gun. Spray pattern, flow etc. i know its been covered before but ur better at explaining things then the other videos ive seen. Maybe just touch on what the knobs on the gun actually do. I see some ppl spray cars with the front fan pattern thing vertical and some with that set horizontally.

@UndergroundPaintKing

Жыл бұрын

Thanks Fish I appreciate you…idk if you have seen this video but if you haven’t it might help kzread.info/dash/bejne/dqOus9mHfcXaZ7A.html

perfect, thanks brother!

@UndergroundPaintKing

2 ай бұрын

You’re welcome! I’m glad the video was helpful 💯

Another great vid from the peoples champ. We’ll be waiting for your spray gun set up video.

@UndergroundPaintKing

2 жыл бұрын

Thanks Kilam68 Roe I appreciate you and stay tuned for the video coming soon

I love your videos

@UndergroundPaintKing

Жыл бұрын

Thanks I appreciate you checking out the videos 💯

Very well explained Ty.

@UndergroundPaintKing

9 ай бұрын

Thanks I appreciate you checking out the video!

Thanks for this valuable info 😌

@UndergroundPaintKing

2 жыл бұрын

You’re very welcome Lotfy I appreciate you checking out the video!

Nice video on consistent air flow at the gun. Nice job UPK - have a good week my friend :)

@UndergroundPaintKing

2 жыл бұрын

Thanks Jerry I appreciate you as always…have a good week!

I appreciate you making this video I learned a lot

@UndergroundPaintKing

2 жыл бұрын

You’re welcome and I’m glad the video was helpful!…I appreciate you checking it out

UPK wow thanks for the learnin You the Man !!!! ALASKA in the HOUSE !!!

@UndergroundPaintKing

11 ай бұрын

You’re welcome and I appreciate you watching from Alaska 🙏🏽💯

Again with a great/informative video…

@UndergroundPaintKing

Жыл бұрын

Thanks Joe I appreciate you checking out the video and I hope the video was helpful!

This was definitely helpful!!!

@UndergroundPaintKing

2 жыл бұрын

Glad the video helped Juan and I appreciate you checking out the video!

i am using a 100ft hose so this is very helpful, as always

@UndergroundPaintKing

5 ай бұрын

Glad the video was helpful 💯💪🏾

good job bro that a big help

@UndergroundPaintKing

Жыл бұрын

Thanks I really appreciate you, and I’m glad the video was helpful!

Yeah I need that setting up your spray gun too. I already have the compressor, paint, primer,base coat, and clear. I need to start prep.

@UndergroundPaintKing

2 жыл бұрын

I have videos on setting up spray guns George hopefully they will help you out

@georgewilson2443

2 жыл бұрын

@@UndergroundPaintKing idk if I watched that one yet but I got my spray guns and everything from summit. The 1.7 tip and the 1.4 tip

@UndergroundPaintKing

2 жыл бұрын

@@georgewilson2443 here is the video and hopefully it helps kzread.info/dash/bejne/dqOus9mHfcXaZ7A.html

Good vid UPK. Wish I watched a video like this before I had to learn all of that the hard way lol

@UndergroundPaintKing

2 жыл бұрын

Lol yeah I thought I should do this video to help people with this issue…appreciate you bro!

Thanks for sharing this info!!!!!

@UndergroundPaintKing

Жыл бұрын

You’re welcome, I hope the information was helpful!

great video thank you for your experience

@UndergroundPaintKing

10 ай бұрын

Thanks Dan, I appreciate you checking it out and I’m glad it helps!

Learning for you brother thank you!

@UndergroundPaintKing

Жыл бұрын

You’re welcome and I’m glad the video was helpful!

Nice information 👌 👍

@UndergroundPaintKing

2 жыл бұрын

I appreciate you checking out the video Pharraway!