how to setup OpenWRT as Access Point
Тәжірибелік нұсқаулар және стиль
Welcome to my KZread channel! In this video, I will guide you through the process of setting up OpenWrt as an access point for your home or office network.
By configuring it as an access point, you can extend the range and improve the overall performance of your wireless network.
Don't forget to subscribe to our channel for more informative videos on networking, technology, and DIY projects. Hit the like button if you find this video helpful, and feel free to leave any questions or suggestions in the comments section below.
Thank you for watching, and let's get started with setting up OpenWrt as your access point!
--------------
#bth #openwrt #accesspoint
Пікірлер: 16
this finally got it to work. thanks. main thing is to change wan to lan cable
this is what a looking for, thak you very mush...
Thanks 🎉
Thanks a lot!
@BTH82
2 ай бұрын
You're welcome!
That’s wasting the WAN port. You can assign the WAN port to the bridge and use it for the back haul connection. That leaves you you with 4 ports for LAN or VLAN use
@ygreq
6 ай бұрын
How do you do that?
@ramosel
6 ай бұрын
@@ygreq After you get rid of the WAN connection, you can assign its port to the LAN device... br-lan.
Y no es mas fácil cambiar de " protocolo , ip static " a "Protocolo dhcp client " ?
please android usb tether to wifi setup
My main router is OPNSense. I have my access pint on an old router with DD-WRT and have configured it to have 3 virtual AP's with 3 different SSID's for, Iot Cameras and streaming. My OPNSense is configured good and is working with 3 different DHCP servers for each virtual AP. Question is: How can I configure my new GL.iNet GL-MT6000 with OpenWRT as access point with different vLAN for each SSID like I have on DD-WRT?? Thank you
instagram privat account how can see like photo vidoe and status please
@khalideyad3949
Ай бұрын
ez just dial 911 and tell them ur problem