Idk how this video doesn't have more views, this is the most comprehensive and easy to understand video ive seen over CO2 systems. You include so many small tips that would be easy to overlook

@Natquascape

3 жыл бұрын

Thank you so much. These comments really help as it show me what my viewers want and the detail I should go into for my viewers. I really want to strive to make informative videos with all the details needed so that you can get the job done.

@Natquascape

3 жыл бұрын

Co2 cylinders contain alot of pressure and can be dangerous, I wanted to make sure that I give information so that my viewers can set up co2 safely. This is why I think I go into detail with this video.

@georgechirita1755

4 ай бұрын

Absolutely spot on , not like others out there just looking to get views

Thank you! This was so much easier to understand! No rambling and very clear to understand!

So glad I found this video. I'm interested in using CO2 but was a bit baffled on parts and setup. This video is so clear and comprehensive. Thank you.

Love your energy and the way you dictate your words. Thank you for teaching a few things!

Excellent video. Informative, structured with step by step instruction and one of the best CO2 videos I have seen to date

best instructional video on co2 system i’ve seen on youtube. Thanks!

THis is, by far the best video I’ve seen on setting up a co2 system. Thanks for walking through everything so clearly!

@Natquascape

2 жыл бұрын

Hi, thanks so much for the comment, I have been getting great comments on this video. I might repost this video for those who have recently subscribed to the channel.

Thank you for explaining everything. Very helpful! This is the most helpful video I've seen so far.

@Natquascape

2 жыл бұрын

I'm really glad you like it, much appreciated

wow thanks for the best explination I've found on youtube, simple straight forward tuturial thanks again!

Thank you for this video. It was very helpful.

FINALLY....a video that gives straight forward instructions on how to set up co2 to an aquarium! Thank You!!!!!

@Natquascape

3 жыл бұрын

You are very welcome and thank you so much for the comment, really helps me to understand what type of content to make.

WOW this video randomly popped up, and I couldn’t be happier, as I’m looking to set up for the first time a CO-2 cylinder properly, with all the attachments and as there’s such a variety of systems from cheap to expensive, not forgetting the long term running costs, depending on what you choose to go with, your video is priceless, full of great advice, as well as demonstrating ‘how too’ set it all up, along with tips and suggestions, so thank you. 🙏👏 I’ve liked and subbed. 👍

Awesome advice and excellent information on the other products needed to get up and running on a CO2 aquarium. I used a passive approach for years. Now I want to go Reactor infusion, so your vid was very informative. Thank you for sharing!

Aww man I need this system that tank size is ideal. This truly looks like what I’ve been looking for. Thanks for the great content 😉

BEST tutorial by far. Thanks mate

This was so helpful. What a great tutorial. Thanks for taking the time to show us!

@Natquascape

3 жыл бұрын

Thank you so much for the positive comment, it really will help me to create the type of content that my viewers find useful. Your comments really helps and I really appreciate it.

Thank you so much! For a girl who isn’t good this stuff you saved me! Followed it carefully and it all worked!

Such a very informative how-to setup on co2. Super welcoming, enthusiastic, and thorough! I now purchased a CO2Art

@Natquascape

3 жыл бұрын

Hi there, thank you so much for the positive comment. I really helps me to ensure that I make content that my viewers like. They are really amazing regulators and I would say an investment.

Brilliant demonstration video, just ordered the artc02 regulator thanks so much 😉

Amazing video! I learned a lot:) Thank you !!

This vid is excellent and very thorough. I echo the previous commentary on why this does not have more views. Thank you! ....and keep it coming....

Super helpful thank you !

Great video man! I think that answered a lot of my questions and I’m ready to move forward with scaping 🤟

@Natquascape

3 жыл бұрын

That's great! Thanks for the comment, go for it

Amazing video man, thank you 😊

I'm new to co2 and this by far is the best video I've seen!

This was a great tutorial, thank-you

I want to say thank you, I was able to set up my kit perfectly and confidently with your video, my plants are Pearling and growing so good 👍

@Natquascape

3 жыл бұрын

Thank you so much for the comment it really means alot to me. Honestly, your comment will help me to create content useful for you guys.

@massimobrigati6649

2 жыл бұрын

Vero, ho visto tanti video, ma questo è il migliore! completo, spiegato molto bene e in modo chiaro e dettagliato! Merita molti più iscritti!

My dude is underrated. Great job on the video and explanation 👍 deserves more views. 10/10

Thank you for the video and comprehensive explanation.

@Natquascape

3 жыл бұрын

You are very welcome, hope you find it useful.

Thank you for the amazing video.. really helped me setup my 1st CO2 setup for my planted tank.. Crisp and to the point.. perfect even for a beginner.. 😀

Great video .Many thanks.

Such excellent explanation. Crystal clear and easy to understand. Great job bro. U deserved my sub. 👍👍👍

@Natquascape

3 жыл бұрын

Thank you so so much for the comment. I have been getting some amazing comments for this video which helps me loads towards making sure I make content you all like. I am glad to hear my explanation is very clear. I will do my very best to ensure I keep up this level of quality for future videos that need explanation.

Very informative video i have ever seen regarding co2 cylinder installation. Thanks bro

Very helpful vid for anyone starting the hobby well done mate 👍

@Natquascape

3 жыл бұрын

Cheers Dean! Much appreciated mate

12:19 I am always curious if someone is sponsored when they make recommendations for a product it means a lot more when there is no money involved, I'm glad you cleared that up! TY for making this video!

@Natquascape

2 жыл бұрын

Thanks alot my friend, I really hope you have found it useful

You're so underated. great explanation

@Natquascape

3 жыл бұрын

Hi there, ah thank you so much for the kind words, honestly it means alot to me. Its really helpful to know if my explanation is too much or too less. I am a senior lecturer in organic and medicinal chemistry at a University in the UK so giving detail is what I naturally aim to do. Thanks you

This is the most valuable video I have ever seen thanks man

@Natquascape

3 жыл бұрын

Ahh...thank you so much for the comment, that's so helpful to know so that I can try to ensure consistency and helpful videos for tutorials and setups. Hope you have subscribed for more videos. Many thanks, Nat

My co2 has been set up like a boss 🙌 😎 thank you brotha wish you the best!

Such a great video! I needed this having just bought a co2 art kit so thank you so much!

@Natquascape

3 жыл бұрын

Thank you so much for the comment, just a note, I removed the check valve after I set it up in the actual tank. In the demo I use a in tank co2 diffuser, having a check valve worked (and in the video) but when I put an in-line diffuser, I had to remove the check valve. You dont have to use the check valve actually as the bubble counter acts as a check valve. Hope this information helps

a very good explanation. thanks mate!

@Natquascape

3 жыл бұрын

Thank you! I'm really glad you liked it and hope you found it useful.

Great video. Really helped me. Thank you.

@Natquascape

3 жыл бұрын

Hi Alan, ahh thanks mate, I'm glad you found it useful. Very best wishes.

Realy good video pal. Nice and easy explained

@Natquascape

3 жыл бұрын

Thanks guys! Hopefully I can provide more educational/informative science videos about aquascaping.

Wow. This video is exactly what I needed. Subscribing. The shirt had me LOLing too.

@Natquascape

3 жыл бұрын

Hi, thank you so much for the comment, it really does help me know how to provide information that people like

That was really awesome explanation... My CO2 cylinder was idle from almost a month. All good now and thanks

@Natquascape

3 жыл бұрын

Hi, really glad you liked the video and found it helpful. The main aim I want to achieve with this channel is to make valuable content that viewers find useful.

Really informative video mate. Checking out co2 as I look to do a high tech setup. Great job

Excellent

I've seen many tutorials, but never as detailed and well performed as this! At most videos they talk way to fast. Great, loving it :-)

@Natquascape

3 жыл бұрын

Wow...thank you so much for the positive comment. I think it's important to give the details because sometimes not knowing the smallest thing can prevent you from getting the job done or in this case, can really be dangerous as we are dealing with pressurised bottles.

@hakanengstrom4243

3 жыл бұрын

@@Natquascape absolutely correct. Been there myself. -;(

Great job thank you 🙏

The most informative video on how to setup co2 I have found. This helps me tremendously as I am looking at making a high tech tank. Interested in your thoughts on CO2ART PRO-SE series regulator? Keep up the good work mate

@Natquascape

3 жыл бұрын

Hi Lochlainn, thanks alot for the comment....means alot. I absolutely love this co2 art pro se regulator. It really does the job. Thanks again for the positive comment mate

@massimobrigati6649

2 жыл бұрын

Vero, ho visto tanti video, ma questo è il migliore! completo, spiegato molto bene e in modo chiaro e dettagliato!

Moving from my 2-bottle DYI CO2 system to a steel canister tonight, and looking for a video that shows in-depth how the manifold and solenoid work. This fit the bill perfectly. Details like pointing out that the close position on the first valve is unscrewed all the way, direction of flow on the check valve, how to turn the system on -- all excellent. Now will be looking for an update on how to decompress the system when it's time to switch the fuel (citric acid and baking soda). In theory, easy, but... so much better to see it done!

Bravo!!!!!!

I just think most modern Bubble counters incorporate a check valve so worth checking, this is a very good tutorial.

I like you! hahahahhahahaha YOur voice is soothing you don't speak too loud like many others🙄 and you're very comprehensible. Thank you!

You are DA BOSS mate 😁! Very nice and intuitive video. Thanks!

@Natquascape

3 жыл бұрын

Hi! Mate. Thanks for the comment! Hope you find this video useful

@deenugent473

3 жыл бұрын

@@Natquascape - Just a quick question please! I am a beginner in aquascaping, and I am planning to plant grass seeds in my 30G tank without CO2. Do you think the grass will be ok if I supply it with fertilizer and do 20% water change weekly? CO2 is a little bit intimidating for a beginner like me 😜. Thanks bro!

@Natquascape

3 жыл бұрын

@@deenugent473 Ah ha...now I have never used seeds before. However, if you are a beginner - I would just try it and see how it goes BUT....do it in a small, cheap experimental tank...don't go all out. I have seen that a dry start method is required for seeds. Once you see established growth then flood the tank....this is where you may get plant melting because the plant has to adapt from being out of water to in water. I would be more tempted to setup a scape with easy plants using no co2 and liquid ferts. Plants like helanthium tenelum green, styrogyne repens, rotala roudatifolia, java fern, bucephalandra and annubias first. Just to get some experience and handle on growing aquatic plants without co2. Then....once you are confortable....add co2 to that scape and see what difference it makes. My tip is cycle the tank FULLY for up to 4 weeks before draining and adding plants. Hope this helps

@deenugent473

3 жыл бұрын

@@Natquascape - Thank Aqua Boss! 👌👍

You should make more videos as this is very well put , thank you

Great info. i have a diffusor in the outlet of my filter, but to eliminate bubbles I also let it flow through an extra filter, in my case the small Eheim Classic, without using the pump. The filter is filled with raw filtermaterial and pieces of egg crate. In this way the CO2 is completely aborbed. No bubbles.

Awesome

@Natquascape

2 жыл бұрын

Thank you very much

Good info

Thanks bro

Best co2 video on KZread bro

@Natquascape

3 жыл бұрын

Hi, ahhh...that means so much to me to hear that. I have been trying to learn how to do these videos in-terms of depth, how long the video should be etc etc, so getting feedback like this really helps me to ensure I make content that is informative and useful, which is my overall aim for the hobby. Thank you

super

very detailed and average pace talk. thank you!

@Natquascape

3 жыл бұрын

Thank you so much

Gosh, you could be a teacher.. so systematic the way you broke it all down.. cheers!

Dude holy shit thank you so much, such a good video that answered so much of my questions,won my sub instantly and will be looking forward to your content

@Natquascape

3 жыл бұрын

Thankyou so much for the positive feedback. It really helps me to know what people think. Your comments and feedback will help to ensure I make content that is useful for you guys, which is the over all aim for the channel.

@ninetailedthot3111

3 жыл бұрын

@@Natquascape thank you,will be showing my friends this channel

thank you for the awesome guide. just one question, is a check valve necessary for co2 art pro se? it has a built in check valve... if its necessary I'll add one then! thank you

One of the best videos on this i have seen, some great tips..really helped my first Co2 set up 👍🏼

@Natquascape

2 жыл бұрын

Thanks so much mate

Nice!

@Natquascape

3 жыл бұрын

Thanks guys!

Very helpful and detailed video. A question though, Is it ok to use a sodastream cannister with that exact type of regulator? Thanks!

@Natquascape

3 жыл бұрын

Hi Ky, thanks for subscribing. Co2 art actually do adaptors so that you can use sodastream bottles, here is the link: www.co2art.co.uk/collections/co2-adapters

Good video, Natquascape! I highly recommend that you use mineral oil in your CO2 bubble counter (regular baby oil is the same substance). The problem with using water in the bubble counter is that it will evaporate. As CO2 is diffused through the water, it will 'pop' at the surface and take turn that water into an aerosol (or O2). This O2, along with CO2, will flow down and will exit at your CO2 diffuser. In most cases, you will find the bubble counter low (and most often, without) water within 1 to 2 weeks. The benefit of using mineral oil is it's viscosity. You will have a more realistic result (and representation) when measuring the 'bubbles per second'. In conjunction with your CO2 drop checker, the position of the CO2 diffuser adjacent to the outflow, you will have an optimal CO2 setup for your Nature Aquarium. I hope this helps!

@Natquascape

3 жыл бұрын

Hi, that's valuable advice....thank you very much I will check the manufacturer's instructions to see what they say about mineral oil. Thanks you

@rikebbarwick3878

3 жыл бұрын

Do NOT use mineral oil in the bubble counter, it clearly states on the packaging not use use Mineral water, ive also checked this with the guys at CO2 Art

@Natquascape

3 жыл бұрын

Hi, I have also checked the manufacturers instructions and it clearly states not to use mineral oil. I know other people have but I would go by the manufacturers instructions

@Natquascape

3 жыл бұрын

@@rikebbarwick3878 Hi, literally just catching up on the comments and saw this, yes, manufacturer does not recommend mineral oil

Hi thanks for the video I’m about to buy the art se but where do I get a 2kg cylinder

Thanks for the video. shouldn't the inline diffuser b upside down? for better co2 coverage on the ceramic?

Great video! I have a quick question. I followed step by step however my working valve is at 120 once I turned the CO2 on. I can’t adjust it to 20-30. Do you know why? I can still adjust the needle valve and control it like that. Thanks

Hi, great vid. Really helped as i just bought that co2art model. So how do you purge excess co2 from that regulator when bottle is empt? ..cause i heard that excess co2 can blow the gauses. I'm using sodastream for co2 with co2 supermarket adaptor. It has a dial on top that lowers pin to open co2. So once i turn off co2 of empty bottle then what..?. I want to do it the safest way without damaging regulator. Thank you. I just subbed.

Great content, do you happen to have a link for that co2 bottle?

Nice vid! Thinking of getting c02 for my 60 gallon tank. Just bought the oase biomaster Thermo 600. Seems like inline is the way to go.

@Natquascape

3 жыл бұрын

Hi! Thank you! Yes....if you have an oase 600 I would definitely go with inline. I've always got better results with inline co2

@simonelson1577

3 жыл бұрын

Yes, definitely go inline if you are using a canister filter.

Thank you. Great explanations.

@Natquascape

3 жыл бұрын

No problem, I like to use products and then give an update so people know the pros and cons, then if the pros outweigh the cons, I reccomend it. If you like product reviews and setups along with more aquascaping step by step setups, please subscribe and hit the notification bell so you dont miss out. I've recently set up a co2 bottle with a stride ways co2 regulator which is working out well. I'll see if I can donate review on that one day.

Hello! I really enjoy all your video guys. I have a quick question. Is it good or bad to place the Co2 diffuser just next to the suction pipe of my external filter? I'm thinking like this the Co2 has more time to dissolve in the water before being injected back to the tank via the outlet pipe. But maybe the Co2 concentration will be too high for my beneficial bacteria inside my external filter. What are your thought about it ?

Hi, I have been getting a few comments about using an inline check valve. I just checked my video and I am deffinately using a check valve made by jbl with the neo diffuser which worked well in the demonstration. I must have done this as a safety precaution and did not realise that the bubble counter also acts as a check valve. Having an extra check valve is no harm if it works, looks like my other check valves are not suitable for use with an inline co2 diffuser (works with in tank diffuser like the neo diffuser just fine). Hope this information helps. Hope this information helps. I thought I would message as I am trying to reply to a couple of comments but unfortunately, I cant seem to reply for whatever unknown reason. Hope this information helps. Very best wishes, Natquascape

When using a heater on the outlet of the external filter do you place the inline defuser before or after the heater ?

I'm new to CO2 and I'm finding your information delivery very good. Curious about not using CO2-proof tubing on the output of the inline diffuser. Possibly because it is in the water return, diluting the CO2 concentration? Thank you!

@Natquascape

3 жыл бұрын

Hi, so any residual CO2 when reacted with water will turn to carbonic acid, which in time, could slowly degrade the tubing. I think the tubing will be full of co2 and water will react to give carbonic acid, the concentration of which I am not sure. The reason I did not use co2 resistant tubing is because I got fed up of it not fitting tight onto the inline diffuser outlet haha, silicon tubing just worked better

great video! may i ask where you get the CO2 cylinder from?

@Natquascape

3 жыл бұрын

Hi - I got mine from my local aquascaping store called Horizon aquatics UK www.horizonaquatics.co.uk/

Amazing video mate. One question. Can I use just a standard airpump check valve?

@Natquascape

2 жыл бұрын

Hi, you want ones for high pressure CO2 my friend

@rajbirsingh5577

2 жыл бұрын

@@Natquascape thanks mate

Excellent video, the best I could find about CO2 setup. So a new tank would read at about 800PSI, when should I refill the CO2 tank? When it drops below 500 in the red zone? Thanks

@Natquascape

3 жыл бұрын

Hi there, thanks so much for the comment, it really helps me with how I should make content. May I please ask what regulator you are using?

@allaboutvisual

3 жыл бұрын

@@Natquascape hi there I’m using the CO2Art CO2 Regulator Pro-SE Series Dual Stage with Solenoid. Thanks

@Natquascape

3 жыл бұрын

@@allaboutvisual hi there, I have just come back from holiday, looking at my co2 art regulator I would suggest you replace when it gets to about 250psi. Ensure you check the working pressure, mine is set to about 45psi as I am using in-line co2. Hope that helps

Great video, very informative thanks. Question, I have a 6ft (500 lt) tank that l want to install co2 with an inline diffuser, problem is my canister filter has large tubing, 22/28 roughly and l cant find any diffusers to suit so l would have to install reducers on each end of the tubing to make the 16/22 fit which of course would restrict the efficiency of the filter itself. Do you see this as a problem, should l just install an in tank diffuser? Cheers in advance.

@Natquascape

3 жыл бұрын

My advice would be inline co2 for 6foot to ensure co2 distribution. You would have to go for reduction adaptors my friend. I have had a look for larger inline diffusers and have failed to find any. I think you will be OK interms of filter performance.

@squidlips5368

3 жыл бұрын

@@Natquascape Ok thanks for the advice, looks like inline for me. Being new to this co2 stuff my only worry is my tank looking like a big sprite bottle lol. Anyways take care. Subscribed!

Is your recommend regulator Pro art cga320 standard fits my co2 tank which i bought locally here in Bahrain? There are codes WP15 and QF 2A markings mentioned near the nexk output of the tank. Your help ia highly appreciated

@Natquascape

2 жыл бұрын

Really good question. Really sorry but I would not know the answer to this if the tank is in Bahrain. Sorry I could not be much help my friend

Does the check valve come with the CO2 Art set? Im waiting for mine to be delivered didnt think about the check valve xd

Can you put the reactor inline with a uv filter without killing the output flow? I have the fluval 407 on a 75 gal

I bought a co2 tank but i dont know the regulator size that will fit into it. Tank also shows WP15 near its intake. Any idea how to get regulator fron amazon? Ty in advance

Hi bro.. Im planning to buy co2 kit which include mufan dual guage regulator, solenoid, bubble counter, and inbuilt check valve, is check valve def inbuilt is that ok or need to connect check valve seperately. Is this mufan brand good..? Kindly suggest me bro.

Are all the co2art systems dual stage? I'm looking at the Pro-SE kit, is that the same one you use in this video?

@Natquascape

2 жыл бұрын

Hi, yes they are all dual stage mate. I am using the Pro SE kit in this video mate

Quick question do you use just standard tap water in the bubble counter part?

Where do I put the check valve if I’m using an inline diffuser ? I guess anyplace between the bubble counter and the inline diffuser ?

Would it work to diffuse the c02 in the return section of my sump 🤷🏼‍♂️

Great video thanks. What size is your bottle please? Cheers

@Natquascape

2 жыл бұрын

Thank you, 1.5kg bottle

@stevenb1021

2 жыл бұрын

@@Natquascape much appreciated. I couldn’t find a local supplier that did refillable 2kg bottles due to the co2 shortage so instead I ordered a fire extinguisher :-). Cheers

Nice video, I’m getting an inline. Should I open my co2 tank valve fully or just a bit? I see people who do both.

@Natquascape

3 жыл бұрын

I just open the front valve so that the working pressure is around 35, for inline co2. Hope that helps

@uraninite8151

3 жыл бұрын

@@Natquascape I dont have an adjustable reg so i cant adjust my working pressure. I was wondering whether i should open my main tank turn valve on the cylinder fully?

@Natquascape

3 жыл бұрын

@@uraninite8151 hi there, without fully knowing what setup you have I can't say if you should open up fully or not. I wouldn't want to recommend unless I know exactly what setup you have for health and safety reasons. I wouldn't want you to have any mishaps that may cause harm

@uraninite8151

3 жыл бұрын

@@Natquascape Its virtually the same as yours, except my regulator is non adjustable and not dual stage. But its ok.

I have the intake on the far back of the tank on the left side I have the diffuser and the same side I have the wavemaker closer to the top pushing the water to the right the intake is on the right I have the nozzles pushing water to the right making a circular motions..when the diffuser in on it raise to the top hitting the make waver as it pushing the bubbles to the right it stays on the right side making circles it’s goes to the top some bubbles make it to the left side I feel I wasting co2 in the tank when the bubbles are not making a circular motions the co2 drop checker is staying the same Color blue I ordered a small wavemaker it will be here next week where can I place that make maker so I don’t waste anymore co2 please help let me know

Is there supposed to be a very quiet chirpy noise coming from my system? I read a comment saying that I need to install a washer, but I didn't, I thought there was one in it already. I saw you simply tightened your regulator on, same as me. Odd

I have 75 gallon fish with FX 4 canister filter the intake is on the left side Near the wavemaker on the my right side of the tank is the outtake can I place the diffuser on the right side their is more flow coming out of my out take

@Natquascape

2 жыл бұрын

Hi, 100% place co2 near the outflow pipe, never near the intake pipe.

@rosidragon40

2 жыл бұрын

@@Natquascape thank you for letting me know I set the co2 up the way u explained it on your video I will have it start running tomorrow thank u so much

@Natquascape

2 жыл бұрын

@@rosidragon40 your more than welcome, my pleasure 🙏

@rosidragon40

2 жыл бұрын

Last night I put the diffuser in the tank to soak this morning I put the co2 tank on the psi30 and the bible per count is 1 but the diffuser is hardly letting out much bubbles

I have this huge 18 inch reactor someone have given me to hook up on my 60 gallon take. My question is: 1. Is it needed? If so how to hook it up to the Co2? 2. Can i find something much smaller instead? 3. Do they need to be filled with anything inide the 3 inch pipe, because the one i have is empty? I've seen some filled with blue or grayish pieces inside.

Can I keep the air pump running on 24/7 or only at night when using co2?

@Natquascape

3 жыл бұрын

Ok - best thing you can do is get some timers that plug into a socket. I have just switched from mechanical timers to wifi programable timers, game changer for me. Get one for co2 and one for the air pump. Check out my video on how to set up lights for planted aquarium, you can buy this for lights (the one I recommend) from amazon: www.amazon.co.uk/Aquarium-Modulator-Lighting-Controller-Intelligent/dp/B07M59NWVD?pd_rd_w=k8rrT&pf_rd_p=81ce6caf-beb7-4fac-8db2-f73b3de1e5da&pf_rd_r=0WDZGJN0JPKPMJFCCHNR&pd_rd_r=c81d7bf3-fa02-4c3d-860c-31587337b802&pd_rd_wg=6Vo4X&pd_rd_i=B07M59NWVD&psc=1&ref_=pd_bap_d_rp_3_i Ok - so in the first phase of setting up, 6hrs of light max for about 4 weeks, then either ramp up intensity or duration. CO2 1-2hrs before lights; co2 off 1-2 hrs before lights. THEN, time the air pump to come on 1hr after lights go off. let the air pump run over night and to turn off 2hrs before CO2 comes ON ithe next day. Hope this makes sense and that I have been helpful.