How to build a rig course: cotyy.krtra.com/t/WrnygI2hoSdT Join our VIP membership: www.southeastsoftwash.com/product-category/memberships/ The BatchBuster Metering Valve is Here! www.southeastsoftwash.com/product-category/parts-supplies/softwash-metering-valves/ 149$ online softwash training : www.southeastsoftwash.com/product/softwash-101-training-video/ For the BEST Softwash Equipment, click here : southeastsoftwash.com/product-category/equipment/ To Get pumps, parts and supplies, check out this link: southeastsoftwash.com/product-category/parts-supplies/ For your chemical needs, here ya go: southeastsoftwash.com/product-category/chemicals/

My right ear really enjoyed this video

@derekneal541

24 күн бұрын

I was wondering why the video had no sound. My right speaker is out!

Excellent information! Thank God for people like you who share their knowledge with us. God Bless!🙏🏾

Please remember to clean the stainless micro screen filter between the supply tank and pressure pump once a month. It is very easy to misdiagnose a cavitation issue with a suddenly rough running pressure washer pump engine and start to address an issue with the engine. Some of my customers have well water, pond water, pool water and a nearby running stream or creek for water supply and I sometimes use my soft wash pump to supply water to my buffer tank. Yes there is a filter on my 5.5 soft wash pump. I tried the Bleach Pump from EverFlo and after a few months water got behind the pump head and engaged the safety circuit. I just bypassed the safety leak circuit and saved the pump and it works perfectly. Keep up the great work Cody. I have been in the field for 14 yrs as an owner operator.

Excellent video. Clear, concise, knowledgeable. Great content all around. Thank you for your expertise.

Kudos to you for your selflessness in sharing this information.

Excellent Video. Straight forward and to the point.

Answered all my questions as usual. Thank you!

Guys thanks so much! You helped me save a little over $200.00 from a second party to help set up my buffer tank. Double thumbs up!!!!

@southeastsoftwash4020

Жыл бұрын

Nice!

Man this explained everything I’ve wanted to know! I appreciate you brother!

Excellent information points! Thank you

Excellent video, thank you so much for your knowledge. I may have to buy that course.

thanks, I went ahead and purchase a used Honda GX690 pressure washer it appears to be the one a lot of guys are using thanks for the reply.

Can't wait to afford a turnkey system from you guys. They're beautiful. But for now, the course will do. :)

Well done, excellent vid 🎉

Great. Thank You for the info !

great info.. even to know it and to hear it and reinforce it.. thanks.

Great content man thanks so much 🦾

Great video.

Great info Thanks much !

I’m actually building a rig now with a 25gal tank. It’ll be a 4.8gpm pump. It’s on the back of my Ford ranger so that’s about as big as I can handle at the moment until I start working on my trailer. Even then I’m going with a 125 gallon tank. Also I have a different full time job this is just a side hustle that might turn into more.

Thanks, I really wanted to know this...🙏

I needed all this and the class done 8 months sooner 😂

@southeastsoftwash4020

Жыл бұрын

Lol. I know the feeling

Nicely explained

Great tips thanks boss

Best video ever 👍🏽👍🏽

Thanks

great info

That IGX 800 absolutely throws water. With just the wand with no tip it’s throwing water 60+ feet in a tight stream. Wild.

@southeastsoftwash4020

Жыл бұрын

That son ain’t no joke!

Great vid/ info per usual bro! 😎

@southeastsoftwash4020

Жыл бұрын

Be on the lookout I’ve got a care package on its way to you!

@reggiebrice5562

Жыл бұрын

@@southeastsoftwash4020 shiiii!!! Bro you’re too much. Appreciate the heck out of you and the relationship man!

Great info

@southeastsoftwash4020

Жыл бұрын

Thanks bro

I need that parts needed information for this buffer tank setup Thanks

What if you put an inline one way check valve in the bypass so that when the unloader is allowing water to the gun the other end isn't open with that recommended amount of dribble.

What is the link for the filter on the supply hose reel? Thanks.

Im 1 minute in the video. Liked and subscribed immediately lol!!!

Hey Coty, quick question. What size hose do you recommend for the bypass hose?

Thanks for the video, and I have a few questions about the tank: Is a buffer tank airtight or is it open to air through some place at the top? My second question is because I am running a 4GPM machine, but many of the homes around me don't quite get 4GPM for some reason: Do you need an additional pump between the tank the pressure washer to pump the needed GPM, or will gravity do that for you from the weight of the water? Great video, thanks!

Do yall have a pump to go from tank to direct drive so it doesn’t starve the washer due too low pressure of a 3gal min washer also my honda has and idle down system in place

my right ear enjoyed this video

Can I pull water from one outlet from 2 machines pulling in different directions or should I use 2 separate bulkheads or only open one up at a time

Does a 12 volt pump for soft wash (mini pumps) need a buffer tank?

Is there a need for a pump between the exit of the buffer tank to the pressure washer??

We have long driveways where I live, I have a 4 gpm machine but I need more hose. What size buffer tank could I get to wash those 400 ft driveways and still be hooked up to the customers water using a 300 ish ft hose? I know the more hose the less pressure so thats why I want to get a buffer tank...

Aren’t auto detailing rigs the same as a high or soft wash system. Since all have a central water tank, a high pressure pump?

Hey i have a 4gpm starter setup .Say i got 100gal + 50gal +30 gal.tanks.should i just setup a 100gal buffer tank anyway? Also got a 12v 5.5gpm pump setup on the rig.

How would I filter the water if I have hard water will that mess up pressure washer

What happens if your working in back yard and machine takes water faster than customers incoming? If water runs out do you get chance to turn machine off before damage?

what can you put on a 48x48" utility trailer?

You can run one 8-9 gpm machine off a 55 gallon... the main issue is basically how fast you can fill it up. If youre running 8gpm but your clients house only pumps 5 youre going to be short (no matter if youbhave a 100,200,1000 tank). Like power washing king said "easier to fill a 55 gallon tank, than a 100,200 or higher tank)

@ROIPW3000

Жыл бұрын

I think you will be fine. I'm running a 5 gpm pump using a 55 gallon drum. Most homes in my area put out max 3 gpm. My 55 gallon drum is always full. There are enough times when one lets off the trigger to help it catch up. I thought for sure I would be running out of water, but I'm no where near running out. I know I could switch to a 35 gallon tank and I would be fine.

If I'm using one of those 250 gallon totes, do I really need to drill any holes in it? Couldn't I just use the openings that are made into it already? The feed on the bottom and then use the cap on top to fill it up and run the bypass back into?

i just went outside my house and filled a 5gal pail in 28 seconds off my spigot. that tells me (and please correct me if I'm wrong) i should be able to run an 8gpm machine directly off the spigot. understanding that not all spigots will be the same... maybe a 55g buffer tank should be more than ill ever need for an 8 gpm?

Great video Cody I learned a lot from it. I am new at pressure washing. I have a 4.0 GPM direct drive Honda pressure washer I just purchase a 5 x 10 trailer and I want to start installing the tanks can I use my buffer tank to feed water to my direct drive pressure washer

@WillMagnerFitness

Жыл бұрын

Yes

@jayslo914

Жыл бұрын

You will need a pump between the tank and the pressure washer from what I’ve read/heard about direct drive because they don’t have suction.

What size mesh is that???

Can I start washing dumpster pads with a 2.5? And a 15" surface cleaner

@southeastsoftwash4020

Жыл бұрын

Yep. It’ll be slow but doable

Coty... Thank you. I'm about to pull the trigger on a 5x8 trailer with 2 rectangular vertical 50g tanks and a smaller surfactant tank. 5.5gpm PW and 5gpm 12v softwash system with proportioner. As a 1-man operation, do you think 50g would be fine. as I figure, at full capacity, i could run wide open for 30+min or more without draining the tank at most lower water pressure spigot locations. Do you see a problem with that, sir?

@southeastsoftwash4020

Жыл бұрын

Yea you’ll be fine with that

@outofthetoolboxtinker9646

Жыл бұрын

@@southeastsoftwash4020 dude. I'm so impressed that you responded. I appreciate it. I've learned so much.

@outofthetoolboxtinker9646

Жыл бұрын

@@southeastsoftwash4020 Coty... Do you think it's necessary to put any type of protectant like a clear coat of some sort on the wood decking of a wash trailer?.. something bleach resistant? Thank you, sir.

@southeastsoftwash4020

Жыл бұрын

@@outofthetoolboxtinker9646 we use only pressure treated lumber on our trailers but we also apply a heavy coat of raptor bed liner. It’s 100% chemical proof at that point

525gal tank is essential for commercial flatwork. Spigots are far and few between

@southeastsoftwash4020

4 ай бұрын

Naw

💪👍

I know this is older vid but seems most relevant, I live in a rural area where most people are on wells. Can you run washers off wells without drying them out? Would a buffer tank be enough or do you need to bring all water like a 400-500 gal tank and not hook up to well at all?

@user-hk5xp8wc6g

9 ай бұрын

All wells around me. Im forced to used a 2.5 gpm machine. The buffer tank is connected to the customers water. So if you are shooting a 5gpm machine wile the tank is refilling at 3gpm your tank is going to lose 2 gallons per minute of spraying. But with all the stops, breaks, Tip changes, and stuff like that you probably are only losing less than 1 Gallon Per minute from the tank

I want to run 2 4gpm machines off 1 tank. Should I do 165 gallon or 300 gallon tank?

@lakepressureandsoftwashing3102

Жыл бұрын

I have the same set up on 1 of my trailers. 2-4 gpm Direct drive 1 1/4 supply to pressure washer. 275 Ibc tote and it works great. Back up trailer for me.

So no buffer tank for a 4 gpm?

I have a Simpson 4 GPM system. I assume it doesn’t create its own suction to prime itself. If I install the bulkhead at the bottom of the tank, will the weight of the water in the tank be enough to prime the pump on my system?

@lifeisrandom23

Жыл бұрын

I have the same question...

@jeffhorton2843

Жыл бұрын

i have 4 gpm too and a 250 gallon tank and its hard to prime it with gravity. i suggest using as short a hose you can that feeds to the pw. i was trying to use a 50ft hose and its just too long. the gravity pressure isnt enough to push the water 50ft.

❤️❤️❤️❤️❤️❤️👍👍👍👍👍👍

Can you run a 5.5 or 8 gallon per minute pressure washer on JUST the 200 gallon tank, without connecting to a customer's residential spigot?

@codyr8696

7 ай бұрын

Math: 200 gallons at 8 gallons per minute. You got 25 minutes of continuous use. But consider having to leave the tank with 20 gallons. So 22.5 minutes. And for 5.5; you got 36 min

Hey Coty, I lost my cap on my water tank on my AlumiMAX can I call tomorrow and buy a lid from you guys? I already tried buying a aftermarket one but doesn’t seem to fit!

@southeastsoftwash4020

Жыл бұрын

No need to buy it bro We got you! Just call ty tomorrow

@Abel3270

Жыл бұрын

@@southeastsoftwash4020 awesome thank you so much!🙏🏽

@Abel3270

Жыл бұрын

@@southeastsoftwash4020 Came In today, and it fit perfectly! Thank you!🙏🏽🔥

Interested in course but would like to know if your educated in regulations in California i read bleach is a no go have to use green products

@southeastsoftwash4020

11 ай бұрын

Sodium hypochlorite is 100% biodegradable

I’m not. Just got caught up last night. I want to be able to beat there bs game . Sadly I can’t seem to but I have a difficult time giving up on it

What size is the bypass line ?

@southeastsoftwash4020

7 ай бұрын

3/8 or 1/2" is fine

His whiteboard game is serious

I made this mistake and it was driving me crazy, I couldn't figure out how I was sucking air into my pressure washer.

Coty, is it possible to run two 4 gpm machines off of the customers house if they have multiple spigots? Or would that essentially be the same as using an 8 gpm machine, thus needing a buffer tank?

@0wen574

Жыл бұрын

You can't run two 4gpm machines at once. Average house pressure is 3.5-4gpm

@0wen574

Жыл бұрын

@@HouseWashingRick he was asking about direct hook up to house spigot

If u dont buffer wat r u really doing

First.

Slow down while you're talking. You have me at lasts a long time and makes me money. Only thing keeping me from doing pressure washing full time is my regular job. Just pays consistently.

You should have showed the dog…. You would have 3x the views

@southeastsoftwash4020

10 ай бұрын

Says the man with no subscribers

I make any trailers for $5k

Thanks